ZINUS Ibidun Upholstered Platform Bed Frame - Full, Beige

1. Introduction

This manual provides instructions for the assembly, care, and maintenance of your ZINUS Ibidun Upholstered Platform Bed Frame. This bed frame is designed to support your mattress without the need for a box spring, offering a streamlined look and enhanced mattress longevity. It features a foam-padded headboard with button tufting and a durable steel framework with wood slat support.

All necessary parts and tools for assembly are conveniently located in the zippered compartment of the headboard.

2. Safety Information

• Read all instructions carefully before assembly.
• Keep all small parts away from children.
• Assemble on a soft surface (like carpet) to prevent damage to the product.
• Ensure all bolts are tightened securely before use. Periodically check and re-tighten all connections.
• Do not use power tools for assembly as this may strip screws or damage components.
• Do not stand on the bed frame during assembly or use.
• Maximum weight capacity: Twin size supports up to 350 lbs. All other sizes (Full, Queen, King) support up to 700 lbs.
• This product contains Proposition 65 chemicals.

3. Parts List

All parts, tools, and instructions are conveniently located in the zippered compartment at the back of the headboard.

Included Components:

• Headboard (with zippered compartment for parts)
• Footboard
• Side Rails (2)
• Center Support Bar(s)
• Wood Slats (connected)
• Support Legs
• Assembly Hardware (bolts, washers, Allen wrench, ratchet tool)
• Installation Manual

4. Setup & Assembly

Assembly is designed to be straightforward and can typically be completed by two people in under an hour. Follow these steps for proper setup:

4.1 Unpacking

1. Carefully open the packaging. The entire bed frame is often shipped in one box.
2. Locate the zippered compartment on the back of the headboard. Unzip it to find all the components, hardware, and instructions.
3. Lay out all parts on a clean, soft surface to prevent scratches or damage. Verify all parts are present against the parts list in your manual.

4.2 Attaching Support Legs

4. Attach the support legs to the headboard and footboard as indicated in your specific instruction manual. These typically screw directly into pre-drilled holes.

4.3 Connecting Side Rails and Center Support

5. Connect the side rails to the headboard and footboard using the provided bolts and tools. Do not fully tighten bolts until all components are loosely assembled.
6. Install the center support bar(s) and their respective legs. Ensure they are properly aligned and secured.

4.4 Installing Wood Slats

7. Unroll the connected wood slats across the bed frame. Many Zinus bed frames feature Velcro strips on the slats and side rails to keep them securely in place and prevent noise.
8. Press down firmly on the slats to engage the Velcro.

4.5 Final Tightening

9. Once all components are in place, go back and fully tighten all bolts using the provided tools.
10. Place your mattress directly onto the wood slats. A box spring is not required.

4.6 Assembly Video

5. Operating Instructions

Your ZINUS Ibidun Upholstered Platform Bed Frame is designed for immediate use once fully assembled. Simply place your mattress directly onto the wooden slats. No box spring is required.

5.1 Mattress Compatibility

This platform bed is compatible with various mattress types, including latex, memory foam, and spring mattresses. The durable wood slats provide ample support, extending the life of your mattress.

5.2 Under-Bed Clearance

The bed frame offers approximately 6.9 inches of clearance from the ground to the item, providing space for under-bed storage if desired.

6. Care & Maintenance

• Cleaning: For the upholstered fabric, spot clean only. Use a mild detergent and a damp cloth to gently clean any soiled areas. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
• Avoid Excessive Moisture: Keep the bed frame in a dry environment to prevent damage to the wood and upholstery.
• Moving the Bed: When moving the bed frame, lift it rather than dragging it to prevent damage to the legs and frame structure.

7. Troubleshooting

7.1 Squeaking Noises

If your bed frame develops squeaking noises:

• Check all bolts and ensure they are securely tightened. Loose connections are a common cause of squeaking.
• Verify that the wood slats are properly seated and the Velcro strips are engaged.
• Ensure the center support legs are firmly on the ground and not wobbling.

7.2 Instability/Wobbling

If the bed frame feels unstable:

• Re-check all assembly steps to ensure correct installation of all components, especially the corner brackets and center support system.
• Confirm that the bed is on a level surface. Adjust the feet if necessary.

8. Specifications

9. Warranty & Support

Your ZINUS Ibidun Upholstered Platform Bed Frame comes with a 5-year worry-free limited warranty. This warranty covers manufacturing defects and ensures the product meets Zinus's high standards. Please retain your proof of purchase for warranty claims.

For customer support, missing parts, or warranty inquiries, please refer to the contact information provided in your included installation manual or visit the official Zinus website.