Philips LED 800094
Contents
Philips Hue Phoenix Dimmable LED Smart Pendant Light User Manual
Model: 800094 | Brand: Philips LED
Introduction
The Philips Hue Phoenix pendant light offers dimmable warm to cool white LED light, designed to adapt to your daily moments and enhance your home environment. This smart light integrates seamlessly with your Philips Hue system, allowing for effortless control via your smart device when connected through the Hue hub (sold separately).

Figure 1: Philips Hue Phoenix Dimmable LED Smart Pendant Light.
This manual provides comprehensive instructions for setting up, operating, and maintaining your Philips Hue Phoenix pendant light, along with important specifications and troubleshooting tips.
Getting Started with Philips Hue System
To fully utilize your Philips Hue Phoenix light, it is recommended to integrate it into a Philips Hue system. The following video provides a general overview of building and expanding your Philips Hue setup, including adding lights and accessories.
Video 1: Overview of building your Philips Hue system, demonstrating how to add various lights and accessories.
Setup and Installation
The Philips Hue Phoenix pendant light is designed for straightforward installation. Follow these steps to set up your light:
- Prepare for Installation: Ensure the power to the lighting circuit is turned off at the circuit breaker before beginning any electrical work.
- Mounting: Install the pendant light in any location where you would typically install a standard overhead light fixture. Adjust the height of the pendant light as desired.

Figure 2: Dimensions of the Philips Hue Phoenix Pendant Light (Max 1600mm height, 500mm diameter).
- Power Connection: Connect the light fixture to your home's electrical wiring according to local electrical codes and the provided wiring diagram (if applicable, typically found in the physical product manual).
- Power On: Once installed, restore power to the circuit. The light should turn on.
- Pair with Hue Bridge: For full smart functionality, pair your Philips Hue Phoenix light with a Philips Hue Bridge (sold separately). Open the Philips Hue App on your smartphone or tablet, navigate to "Light setup" or "Add light," and follow the on-screen instructions to discover and add your new light.
The light features a special 3D texture with a hexagonal pattern that captures and reflects light, creating a dynamic effect.

Figure 3: Detailed view of the unique hexagonal texture on the light's surface.
Operating Your Light
Once your Philips Hue Phoenix light is set up and paired with the Hue Bridge, you can control it using various methods:
- Philips Hue App: Use the Philips Hue App on your smartphone or tablet to:
- Turn the light on/off.
- Adjust brightness (dimmable warm to cool white).
- Change light settings to match any mood or activity (e.g., reading, relaxing, concentrating, energizing).
- Create and activate custom scenes.
- Group lights into rooms for unified control.

Figure 4: The Philips Hue Phoenix light illuminating a room.

Figure 5: The Philips Hue Phoenix light set to a warm white ambiance.

Figure 6: The Philips Hue Phoenix light set to a cool white ambiance.
- Voice Control: If you have a Philips Hue Hub and a compatible voice assistant device (e.g., Amazon Alexa, Apple HomeKit, Google Assistant), you can control your light using voice commands.
- Philips Hue Accessories (Sold Separately): Expand your control options with accessories such as:
- Hue Dimmer Switch: A wireless switch that can be mounted on a wall or used as a remote control to dim, brighten, and cycle through light scenes.
- Hue Tap: A kinetic-powered switch that allows you to trigger up to four pre-programmed light scenes without needing batteries.
- Hue Motion Sensor: Automatically turns lights on when motion is detected and off when it's not, offering convenience and energy savings.
- Automation: Pair your light with existing smart home systems like Nest or SmartThings for advanced automation features.
Maintenance
To ensure the longevity and optimal performance of your Philips Hue Phoenix Dimmable LED Smart Pendant Light, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and internal components.
- Bulb Replacement: This product uses integrated LED lighting and does not require bulb replacement.
- Inspection: Periodically inspect the light fixture and its wiring for any signs of damage or wear. If any issues are found, consult a qualified electrician.
Troubleshooting
If you encounter issues with your Philips Hue Phoenix light, try the following troubleshooting steps:
- Light Not Responding:
- Ensure the light fixture is properly installed and receiving power. Check the wall switch and circuit breaker.
- Verify that your Philips Hue Bridge is powered on and connected to your home network.
- Check the Philips Hue App to ensure the light is listed and online. Try refreshing the app or restarting it.
- If the light is still unresponsive, try resetting the light by turning it off and on at the wall switch several times.
- Connectivity Issues:
- Ensure your smartphone/tablet is connected to the same Wi-Fi network as your Hue Bridge.
- Move closer to the Hue Bridge or the light fixture to improve signal strength.
- Restart your Hue Bridge by unplugging it for 10 seconds and plugging it back in.
- Light Flickering or Dimming Unexpectedly:
- Check for loose wiring connections at the fixture or wall switch (consult a qualified electrician if unsure).
- Ensure the light is not connected to a non-compatible dimmer switch. Philips Hue lights require a constant power supply and are dimmed via the Hue system.
For persistent issues, refer to the Philips Hue support website or contact customer service.
Specifications
| Feature | Detail |
|---|---|
| Brand | Philips LED |
| Model Number | 800094 |
| Color | Opal White |
| Material | Plastic |
| Style | Pendant Light |
| Light Fixture Form | Pendant |
| Room Type | Bedroom, Kitchen, Living Room |
| Specific Uses | Indoor use only |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Special Feature | Functional white light; All shades of white - from warm to cool color temperatures |
| Control Method | Voice, App, Accessories |
| Light Source Type | LED |
| Wattage | 9 watts |
| Voltage | 120 Volts |
| Item Weight | 10.15 pounds |
| Product Dimensions | 19.69 x 19.69 x 27.56 inches |
| Connectivity Protocol | Zigbee |
Warranty and Support
Your Philips Hue Phoenix Dimmable LED Smart Pendant Light comes with a 2-year warranty. Please refer to the product packaging for full details regarding warranty terms and conditions.
For technical support, product information, or warranty claims, please visit the official Philips Hue support website or contact Philips customer service directly. Keep your proof of purchase for warranty validation.
For more information, visit the Philips Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.