ELCO Lighting ET530-24W Low Voltage Round Back with Stem Extension User Manual

1. Product Overview

The ELCO Lighting ET530-24W is a low voltage track lighting fixture designed for use with 1 or 2 circuit track systems and compatible accessories. This fixture provides focused illumination, ideal for accent lighting or task lighting applications. It includes a 12V solid state transformer and a 12" - 48" stem extension for adjustable height.

Key Features:

• Designed for a 12V 50W MR16 lamp (lamp not included).
• Compact dimensions: 4 inches (L) x 2 1/2 inches (W).
• Compatible with 1 or 2 circuit track systems.
• Includes a 12V solid state transformer for safe low voltage operation.
• Features a 12" - 48" adjustable stem extension for versatile placement.

Figure 1: ELCO Lighting ET530-24W Low Voltage Round Back with Stem Extension. This image shows the complete track lighting fixture, including the track adapter, adjustable stem, and the lamp head with an MR16 lamp installed.

2. Setup and Installation

Before beginning installation, ensure all power to the track system is turned off at the circuit breaker. Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring and track lighting systems.

Required Tools (Not Included):

• Screwdriver (flathead or Phillips, depending on track system)
• Wire strippers (if modifying wiring)
• Voltage tester

Installation Steps:

1. Safety First: Turn off power to the track lighting circuit at the main electrical panel. Verify power is off using a voltage tester.
2. Prepare the Fixture:
   • Unpack the ET530-24W fixture and inspect for any damage.
   • Adjust the stem extension to the desired length (12" to 48") by loosening the locking mechanism, extending or retracting the stem, and then tightening the mechanism securely.
3. Insert Lamp: Carefully insert a 12V 50W MR16 lamp into the lamp head. Ensure the lamp pins are correctly aligned with the socket holes and push gently until seated. Do not force the lamp.
4. Attach to Track:
   • Align the track adapter on the fixture with the track channel.
   • Push the adapter firmly into the track until it clicks into place.
   • Rotate the locking tab or lever on the track adapter to secure the fixture to the track. Ensure it is firmly locked to prevent accidental dislodgement.
5. Positioning: Once secured, you can slide the fixture along the track to the desired position. The lamp head can be swiveled and tilted to direct light as needed.
6. Restore Power: Once all fixtures are installed and secured, turn the power back on at the circuit breaker.

3. Operating Instructions

The ELCO Lighting ET530-24W fixture operates directly from your track lighting system's power supply. It does not have an individual on/off switch.

Basic Operation:

• Turning On/Off: The fixture will turn on and off with the main switch controlling your track lighting circuit.
• Adjusting Light Direction: The lamp head can be rotated horizontally and tilted vertically to direct the light beam precisely where needed. Gently adjust the head by hand.
• Repositioning on Track: To move the fixture along the track, ensure the locking tab is disengaged (if applicable) and slide it to the new desired location. Re-engage the locking tab to secure.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your ELCO Lighting ET530-24W fixture.

Cleaning:

• Always turn off power to the fixture at the circuit breaker before cleaning.
• Allow the fixture and lamp to cool completely before touching.
• Wipe the exterior surfaces with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Avoid spraying liquids directly onto the fixture.

Lamp Replacement:

• Turn off power to the fixture at the circuit breaker and allow the lamp to cool.
• Gently pull the old MR16 lamp straight out from the socket. Avoid twisting.
• Insert a new 12V 50W MR16 lamp, aligning the pins with the socket holes. Push gently until it is fully seated.
• Restore power to test the new lamp.

5. Troubleshooting

If you experience issues with your ELCO Lighting ET530-24W fixture, refer to the following common problems and solutions:

6. Specifications

7. Warranty and Support

ELCO Lighting products are manufactured to high standards and undergo rigorous quality control. For specific warranty information regarding your ET530-24W fixture, please refer to the warranty documentation included with your purchase or visit the official ELCO Lighting website.

For technical support, replacement parts, or further assistance, please contact ELCO Lighting customer service. Contact details can typically be found on the product packaging or their official website.

ELCO Lighting Official Website: www.elcolighting.com