Western Rivers Pursuit Electronic Caller

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Western Rivers Pursuit Electronic Caller, Model WRC-PURSUIT. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Image: The Western Rivers Pursuit Electronic Caller unit, featuring a camouflage pattern, with its remote control. The main unit has a large speaker, a carrying handle, and various ports. The remote control is dark-colored with an LCD screen and multiple buttons for operation.

Setup

1. Unpacking: Carefully remove all components from the packaging. Ensure you have the main caller unit and the remote control.
2. Battery Installation (Main Unit):
   • Locate the battery compartment on the main caller unit.
   • Insert the required batteries (e.g., 8 AA batteries, not included) according to the polarity indicators (+/-).
   • Securely close the battery compartment cover.
3. Battery Installation (Remote Control):
   • Locate the battery compartment on the back of the remote control.
   • Insert the required batteries (e.g., 3 AAA batteries, not included) according to the polarity indicators (+/-).
   • Securely close the battery compartment cover.
4. Powering On: Turn on the main caller unit using its power switch. Then, press the power button on the remote control. The remote's LCD screen should illuminate.

Operating Instructions

1. Sound Selection:
   • Use the navigation buttons (up/down arrows) on the remote to browse through the available wildlife sounds on the LCD screen.
   • The device has 1GB of storage capacity, capable of holding up to 200 wildlife sounds from the ORION online library.
   • Press the 'Select' or 'Play' button to choose a sound.
2. Sound Playback:
   • Once a sound is selected, press the 'Play' button to begin playback through the main caller unit.
   • Press 'Pause' to temporarily stop playback and 'Play' again to resume.
3. Volume Control: Use the 'Volume Up' and 'Volume Down' buttons on the remote to adjust the sound output level.
4. Remote Range: The ergonomic glow-in-the-dark LCD remote operates effectively up to a range of 250 yards. Ensure a clear line of sight for optimal performance.
5. Sound Management (via USB): To add or remove sounds, connect the main caller unit to a computer using a standard USB cable (not included). The device will appear as a removable storage drive, allowing you to manage the sound files. Refer to the ORION online library for sound downloads and instructions.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of both the caller unit and the remote control. Do not use abrasive cleaners or immerse the devices in water.
• Storage: When not in use, store the electronic caller and remote in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Battery Replacement: Replace batteries in both the main unit and remote control when the power indicator light dims or the device's performance degrades. Always use fresh batteries of the specified type.

Troubleshooting

• Device Not Powering On:
  • Check that batteries are correctly installed with proper polarity.
  • Ensure batteries are fresh and fully charged.
  • Verify the power switch on the main unit is in the 'ON' position.
• Remote Not Responding:
  • Ensure the remote's batteries are fresh and correctly installed.
  • Check for obstructions between the remote and the main unit.
  • Ensure you are within the 250-yard operating range.
• No Sound Output:
  • Verify the volume level is not set to minimum.
  • Ensure a sound file is selected and playing.
  • Check if the main unit is powered on.

Specifications