Mayfair 1848SLOW 346 Slow-Close Molded Wood Round Toilet Seat

1. Product Overview

The Mayfair 1848SLOW 346 toilet seat is constructed from durable molded wood, featuring a high-gloss finish designed to resist chipping and scratching. This round seat includes color-matched bumpers and hinges. It incorporates Easy Clean & Change twist hinges for convenient removal and replacement, and a slow-close mechanism to prevent slamming.

Image 1.1: Mayfair 1848SLOW 346 Slow-Close Molded Wood Round Toilet Seat.

Key Features:

• Slow-Close Mechanism: The seat and lid close slowly and quietly, preventing slamming and pinched fingers.
• STA-TITE Fastening System: Ensures the seat remains securely attached to the toilet bowl, preventing loosening or shifting.
• Easy Clean & Change Hinges: Allows for quick and easy removal of the seat for thorough cleaning or replacement.
• Durable Construction: Made from molded wood with a high-gloss enameled finish that resists chipping and scratching.
• Round Shape: Designed to fit all standard round toilets.

2. Product Dimensions and Sizing

To ensure proper fit, measure your toilet bowl from the front of the bowl to the center of the mounting holes. Toilet seats are typically available in two sizes: Round (approximately 16.5 inches) and Elongated (approximately 18.5 inches). This product is a Round toilet seat.

Image 2.1: Toilet Seat Size Guide illustrating measurements for round and elongated bowls.

Image 2.2: Detailed dimensions for toilet seat mounting holes and length.

3. Setup (Installation)

The Mayfair 1848SLOW 346 toilet seat features the STA-TITE Seat Fastening System for secure installation.

Installation Steps:

1. Prepare the Toilet: Ensure the toilet bowl is clean and free of any debris or old hardware from a previous seat.
2. Position the Hinges: Place the seat on the toilet bowl, aligning the hinge posts with the mounting holes on the bowl.
3. Install STA-TITE Fasteners: Insert the STA-TITE bolts through the hinge posts and the mounting holes. From underneath the bowl, hand-tighten the nuts onto the bolts.
4. Secure with Wrench: Use a wrench to further tighten the STA-TITE nuts. The special plastic bolts are designed to partially break off when the correct torque is reached, indicating a secure, non-wiggling fit. Do not overtighten beyond this point.
5. Test Stability: Gently attempt to move the seat to confirm it is firmly attached and does not wiggle.

Image 3.1: The STA-TITE fastening system ensures the seat remains secure.

4. Operating the Slow-Close Feature

The Mayfair 1848SLOW 346 toilet seat is equipped with a slow-close mechanism for both the seat and the lid. To operate, simply push the seat or lid down gently. The integrated dampeners will engage, allowing the seat and lid to lower slowly and quietly to the bowl without requiring manual guidance or preventing sudden drops.

Image 4.1: The slow-close feature prevents slamming and noise.

5. Maintenance and Cleaning

Regular cleaning will maintain the appearance and hygiene of your toilet seat. The Easy Clean & Change twist hinges allow for quick removal of the seat for thorough cleaning.

Cleaning Instructions:

1. Remove the Seat: To remove the seat, twist the Easy Clean & Change hinges counter-clockwise and lift the seat straight up from the mounting posts.
2. Clean the Seat: Use mild soap and water with a soft cloth or sponge. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the high-gloss finish.
3. Clean the Bowl Area: With the seat removed, thoroughly clean the area around the mounting posts and the top of the toilet bowl.
4. Reattach the Seat: Align the seat's hinges with the mounting posts and push down. Twist the hinges clockwise to lock the seat back into place.

Image 5.1: Easy Clean & Change hinges allow for quick seat removal.

6. Troubleshooting

• Seat Wiggles or Comes Loose:

  The STA-TITE fastening system is designed to prevent this. If the seat becomes loose, re-tighten the nuts underneath the toilet bowl using a wrench until the plastic bolts partially break off, indicating a secure fit. Avoid overtightening.
• Slow-Close Feature Not Working Properly:

  Ensure the hinges are clean and free of debris. If the issue persists, the dampening mechanism may be worn. Contact customer support for assistance.

• Chipping or Scratching of Finish:

  While the finish is designed to resist damage, impact from heavy objects or use of abrasive cleaners can cause chipping or scratching. Always use mild cleaning agents and avoid dropping objects onto the seat.

7. Specifications

8. Warranty and Support

This product is proudly made in the USA. For specific warranty information or technical support, please refer to the manufacturer's official website or contact Bemis Manufacturing customer service directly. Keep your purchase receipt for warranty claims.

For further assistance, please visit the Bemis Manufacturing website.