Introduction
The ICE Orb Levitating/Floating Wireless Portable Bluetooth Speaker offers a unique audio experience with its gravity-defying design and 360-degree sound. This manual provides essential information for setting up, operating, and maintaining your speaker.
Package Contents
- Levitating Speaker Orb
- Magnetic Base with Charging Hub
- Power Adapter
- USB Charging Cable
- User Manual
Safety Information
- Keep the magnetic base away from sensitive electronic devices such as hard drives, credit cards, and pacemakers.
- Do not drop the speaker orb onto the base, as this may cause damage.
- Ensure the product is placed on a stable, flat surface.
- Avoid exposing the device to extreme temperatures or moisture.
- Use only the provided power adapter.
Setup
1. Connecting the Power
- Place the magnetic base on a stable, level surface.
- Connect the power adapter to the DC IN port on the magnetic base.
- Plug the power adapter into a wall outlet. The blue indicator lights on the base will illuminate.
2. Levitating the Speaker Orb
Levitating the orb requires a steady hand and patience. Follow these steps carefully:
- Hold the speaker orb with both hands, directly above the center of the magnetic base.
- Slowly lower the orb towards the base. You will feel a strong magnetic force pushing the orb upwards.
- Adjust the orb's position horizontally until you feel a balance point where the magnetic force supports the orb. The four blue indicators on the base will help guide you to the stable levitation point.
- Once you find the balance point, gently release the orb. If it does not levitate, try again. Do not force the orb down onto the base.
Setup Video Tutorial
For a visual guide on how to levitate the ICE Orb speaker, please watch the official product video below:
Official video demonstrating the setup and features of the ICE Orb Levitating Speaker.
Operating Instructions
1. Powering On/Off
- To power on the speaker orb, press and hold the power button located on the side of the orb until the indicator light illuminates.
- To power off, press and hold the power button again until the indicator light turns off.
2. Bluetooth Pairing
- Ensure the speaker orb is powered on and levitating.
- Activate Bluetooth on your smartphone or tablet.
- Search for available devices and select "ICE Orb" from the list.
- Once paired, the speaker will emit an audible confirmation, and the indicator light may change color or pattern.
3. NFC Connectivity
For devices with NFC (Near Field Communication) functionality:
- Ensure NFC is enabled on your smartphone or tablet.
- Gently tap your NFC-enabled device against the designated NFC area on the speaker orb.
- Your device should automatically pair with the ICE Orb speaker.
4. 360-Degree Sound
The ICE Orb features a circular speaker system designed to deliver 360-degree sound, ensuring consistent audio quality from any direction in the room.
5. Using as a Portable Speaker
The speaker orb can be used independently of the magnetic base. Simply lift the orb from the base and carry it with you. It will continue to play music via Bluetooth.
6. Charging the Speaker Orb
When the orb's battery is low, connect the provided USB charging cable to the micro-USB port on the orb and the other end to the USB port on the magnetic base, or any standard USB power source. The indicator light will show charging status.
7. Smartphone Charging Hub
The magnetic base includes a built-in USB port that can be used to charge your smartphone or tablet when the base is connected to a direct power source. Connect your device's charging cable to the USB port on the base.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker orb and magnetic base. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the speaker and base in a cool, dry place.
- Handling: Handle the speaker orb and base with care to avoid damage to the magnetic components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Orb does not levitate. | Not properly aligned with the magnetic field. | Ensure the base is powered on. Carefully follow the levitation steps in the Setup section, using the blue indicator lights as a guide. |
| No sound from the speaker. | Speaker is off, not paired, or volume is low. | Power on the orb. Re-pair via Bluetooth/NFC. Increase volume on both the speaker and your connected device. |
| Bluetooth connection unstable. | Device is too far from the speaker, or interference. | Move the connected device closer to the speaker. Avoid obstacles or other wireless devices that may cause interference. |
| Orb not charging. | Charging cable or power source issue. | Ensure the USB cable is securely connected to both the orb and the power source. Verify the power source is active. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ICE-WATCH |
| Model Number | ICEOrbWhiteBlue |
| Speaker Maximum Output Power | 100 Watts |
| Connectivity Technology | Bluetooth |
| Audio Output Mode | Surround, 3D spatial audio |
| Mounting Type | Tabletop Mount |
| Speaker Type | 3D |
| Additional Features | NFC-enabled |
| Color | White/Blue |
| Is Waterproof | FALSE |
| Warranty Type | Limited |
| Control Method | Touch |
| Speaker Size | 1 Inches |
| Controller Type | Corded Electric |
| Total USB 2.0 Ports | 1 |
| Item Dimensions (D x W x H) | 3.8"D x 6"W x 2.7"H |
| Item Weight | 2.04 Pounds |
| Compatible Devices | Smartphone, Tablet |
| Power Source | Battery Powered |
| Number of Batteries | 1 Lithium Ion batteries required. (included) |
| Manufacturer | Drive India Enterprise Solutions LTD DBA ICE X ELECTRONICS |
| Number of Audio Channels | 2.1 |
| Wireless Technology | Bluetooth |
| Subwoofer Connectivity Technology | Wireless |
| Connectivity Protocol | Bluetooth |
| Audio Driver Type | Dynamic Driver |
Warranty and Support
Warranty Information
This product comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance or further inquiries, please refer to the manufacturer's official website or contact their customer support department. Contact information can typically be found on the product packaging or the manufacturer's website.