Introduction
This manual provides instructions for the installation, maintenance, and general use of your NICKSTON Large (L) Ergonomic Replacement Earbud Eartips. These eartips are designed to provide a comfortable and secure fit for compatible Sennheiser in-ear earphone headsets, enhancing your listening experience and promoting ear hygiene.

Image: Eight large black ear tips with red inner cores, ready for installation.
Compatible Models
These replacement eartips are compatible with a wide range of Sennheiser in-ear earphone headsets. Please verify your earphone model against the list below to ensure compatibility.
Common Compatible Models:
- IE Series: IE 4, IE 6, IE 7, IE 8, IE 8i, IE 60 WEST, IE 80, IE 80 S
- CX Series: CX55, CX95, CX 150, CX 160, CX 175, CX 180 (Street II), CX200, CX200 Street II, CX 213, CX215, CX250, CX270, CX 271, CX275s, CX 280, CX 281, CX300, CX300 II Precision, CX 301, CX350 Street ii, CX380, CX400, CX 400-II, CX 475, CX 485, CX 495, CX500, CX 55 Street, CX550 Style II, CX 6 Travel, CX685 Sports, CX870, CX880, CX880i, CX 95 Style, CX980, CX980i, CX985
- CXC Series: CXC700
- CXL Series: CXL300, CXL 300-II Precision, CXL400O
- OCX Series: OCX685i, OCX880
- MM Series: MM 30 G, MM30i, MM 50 iPhone, MM50, MM70i, MM 70S, MM 80i TRAVEL, MM200
Important Compatibility Note:
NOT Compatible with: Sennheiser CX 3.00, CX 5.00, CX 7.00BT, HD1, or Momentum M2 IE.
Setup and Installation
Follow these steps to properly install your new NICKSTON replacement eartips onto your earphones. Proper installation ensures optimal sound quality and comfort.
Installation Steps:
- Remove Old Eartips: Gently grasp the old eartip on your earphone. Twist and pull it off the earphone stem. It should come off easily.
- Prepare New Eartip: Take one of your new NICKSTON eartips. These eartips are soft, comfortable, and designed for long periods of wear.
- Align Eartip: Position the channel of the new eartip over the earphone stem.
- Install Eartip:
- Place the eartip onto the edge of the earphone stem.
- Apply gentle pressure and twist the eartip with a circular motion.
- Continue twisting and pushing down until the eartip has fully covered the earphone stem and is securely in place.
- Verify Secure Fit: Ensure the eartip is securely attached on all sides of the earphone stem.
Repeat the process for the other earphone.
Video: A demonstration of how to remove old eartips and install new NICKSTON replacement eartips onto an earphone. The video shows a gloved hand performing the twisting and pushing motion to secure the eartip.

Image: Front view of two earphones with the new NICKSTON ear tips securely installed.

Image: Side view of two earphones with the new NICKSTON ear tips securely installed.
Usage Guidelines
The NICKSTON ergonomic eartips are designed for perfect fit and comfort, even during extended listening sessions. Once properly installed, they provide a secure seal for optimal audio performance.

Image: Two large ear tips measured against an inch ruler, demonstrating their size.

Image: Two large ear tips measured against a centimeter ruler, demonstrating their size.
Maintenance and Hygiene
Regular maintenance of your eartips is crucial for both hygiene and prolonged product life. It is recommended to change your eartips often to avoid ear irritation and to provide better hygiene.
Cleaning Instructions:
- Gently remove the eartips from your earphones.
- Wipe the eartips with a soft, damp cloth. A mild soap solution can be used if necessary, but ensure no residue remains.
- Allow the eartips to air dry completely before reattaching them to your earphones.
- Avoid using harsh chemicals or abrasive materials, as these can damage the eartips.
Storage:
Your NICKSTON eartips come with a protective, durable box organizer. Utilize this box to keep your accessories from getting lost and to maintain their shape and cleanliness when not in use.

Image: The protective box organizer for storing your NICKSTON eartips.
Troubleshooting
- Eartips do not fit: Double-check the compatibility list in this manual. These eartips are specifically designed for certain Sennheiser models and are NOT compatible with models like Sennheiser CX 3.00, CX 5.00, CX 7.00BT, HD1, or Momentum M2 IE.
- Eartips fall off easily: Ensure the eartips are fully pushed down and securely twisted onto the earphone stem as described in the "Setup and Installation" section. A proper, snug fit is essential.
- Discomfort or irritation: While these eartips are designed for comfort, individual ear canal shapes vary. Ensure you are using the correct size (Large in this case). Regular cleaning and replacement of eartips are also important for preventing irritation.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Replacement Earbud Eartips |
| Quantity | 8 pieces (4 pairs) |
| Size | Large (L) |
| Material | Ergonomic Silicone (or similar soft material) |
| Color | TR (Transparent Red inner core, Black outer) |
| Compatible Devices | Sennheiser IE, CX, CXC, CXL, OCX, and MM Series In Ear Earphone Headsets |
| Model Number | 4330152071 |
| Package Dimensions | 3.15 x 2.13 x 0.94 inches |
| Item Weight | 0.634 ounces |
Warranty and Support
Return Policy:
This product is subject to a 30-day return policy for refund or replacement, as per standard retail terms.
Customer Support:
For any questions, concerns, or support regarding your NICKSTON replacement eartips, please contact the seller, NICKSTON - ACCESSORIES & REPLACEMENT PARTS, through the platform where the purchase was made. They have experience and expertise in replacement parts and accessories for earphones and other consumer electronic products.
You can also visit the NICKSTON Store on Amazon for more information and products.