Introduction
This manual provides instructions for the safe and effective use of your Streamlight Sidewinder Compact II flashlight. This versatile, multi-source LED light is designed for various applications, offering white, red, blue, and infrared light outputs, along with waterproof capabilities.
Safety Information
Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Battery Safety: Use only the specified battery type (CR123A). Do not mix old and new batteries, or different types of batteries. Dispose of used batteries properly.
- Eye Safety: Do not stare directly into the light beam. The intense light can cause temporary vision impairment or eye damage.
- Heat: The flashlight head may become warm during prolonged use. Avoid direct contact with hot surfaces.
- Waterproof: While the device is waterproof, ensure the battery compartment is securely sealed before exposure to water.
Package Contents
Verify that all items listed below are present in your package:
- Streamlight Sidewinder Compact II Flashlight
- Helmet Mount
- Headstrap
- 2 x CR123A Batteries (included)
Setup
Battery Installation
The Streamlight Sidewinder Compact II uses two CR123A batteries. Ensure correct polarity when inserting.
- Locate the battery compartment cap, typically at the rear or side of the flashlight body.
- Unscrew or unlatch the cap to open the compartment.
- Insert two CR123A batteries according to the polarity indicators (+/-) inside the compartment.
- Securely close the battery compartment cap to maintain the waterproof seal.
Image: Components of the Streamlight Sidewinder Compact II, including the flashlight, helmet mount, and headstrap. This image illustrates the various parts that come with the product, which are essential for setup and use.
Mounting Options
The Sidewinder Compact II comes with a helmet mount and a headstrap for versatile attachment.
- Headstrap: Attach the flashlight to the headstrap by sliding the clip into the designated slot. Adjust the strap for a comfortable and secure fit on your head.
- Helmet Mount: Secure the helmet mount to your helmet according to the helmet manufacturer's instructions. Once the mount is in place, slide the flashlight's clip into the mount until it locks securely.
Operating Instructions
The Sidewinder Compact II features a multi-directional switch for selecting light sources and adjusting brightness.
- Power On/Off: Press and hold the main power button for approximately 1 second to turn the flashlight on or off.
- Selecting Light Source: Rotate the selector switch to choose between White C4 LED, Red LED, Blue LED, or Infrared (IR) LED. The switch typically has distinct detents for each position.
- Brightness Adjustment: Once a light source is selected, press the main power button repeatedly to cycle through brightness levels (e.g., Low, Medium, High, Strobe). The flashlight will remember the last brightness setting used for each color.
- Strobe Function: A quick double-press of the main power button may activate a strobe mode for the selected light source. Refer to the specific model's switch configuration for exact operation.
Maintenance
- Cleaning: Clean the flashlight body and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the light output becomes dim or inconsistent. Always replace both batteries simultaneously with new ones of the same type.
- Storage: If storing the flashlight for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Dead or improperly installed batteries. | Replace batteries with new ones, ensuring correct polarity. |
| Light is dim or flickers. | Low battery power or loose battery connection. | Replace batteries. Ensure battery compartment cap is securely tightened. |
| Water ingress after exposure. | Battery compartment cap not properly sealed. | Ensure the cap is fully tightened before water exposure. If water has entered, remove batteries and allow to dry completely before reassembly. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Streamlight |
| Model Number | 14513 (Manufacturer Model Number) |
| Light Source Type | LED (White C4, Red, Blue, Infrared) |
| Power Source | Battery Powered |
| Battery Type | 2 x CR123A (included) |
| Voltage | 3 Volts |
| White Brightness | 47 Lumens (C4 LED w/ AA Lithium/Alkaline High) / 55 Lumens (C4 LED w/ CR123 High) |
| Special Feature | Waterproof Function |
| Material | Blend |
| Color | Coyote |
| Item Dimensions (D x W x H) | 76 x 25 x 51 mm (3 x 1 x 2 inches approx.) |
| Item Weight | 0.17 Pounds (approx. 77 grams) |
| GTIN/UPC | 00080926145139 |
Image: Performance specifications table detailing lumen output, run time, beam distance, and candela for various battery types (CR123, AA Lithium, AA Alkaline) when using the C4 LED on high setting.
Warranty and Support
For warranty information or technical support, please refer to the official Streamlight website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
