Introduction
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Sanus MLF13-B1 Articulating Universal Wall Mount. This mount is designed to securely hold 37-80 inch flat-panel TVs weighing up to 130 lbs, offering full-motion capabilities including extension, pan, tilt, and swivel for optimal viewing flexibility.
Safety Information
WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact Sanus Customer Service or a qualified installer.
- Weight Capacity: Do not exceed the maximum weight capacity of 130 lbs (58.97 kg).
- Screen Size: Designed for 37-80 inch flat-panel TVs.
- Structural Integrity: Ensure the mounting surface can safely support the combined weight of the equipment and hardware.
- Stud Mounting: Always mount into solid wood studs or concrete. Do not install into drywall alone.
- Cable Management: Route all cables carefully to prevent pinching or damage during movement.
- UL-Listed: This product is UL-listed for quality and safety assurance.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Sanus customer support.
- Wall Plate Assembly
- TV Bracket Arms
- Mounting Hardware Kit (various screws, washers, spacers for TV and wall)
- Cable Management Clips
- Allen/Hex Wrenches for adjustments
- Instruction Manual
Setup and Installation
Professional installation is recommended. If performing a DIY installation, ensure you have the necessary tools and expertise. Refer to the detailed instructions provided in the physical manual for specific drilling templates and hardware selection.
- Pre-Installation Check:
- Confirm your TV's weight and VESA pattern are within the mount's specifications.
- Locate and mark the center of your wood studs using a reliable stud finder.
- Determine the desired height for your TV. Sanus provides a Heightfinder tool on their website for assistance.
- Attach TV Brackets:
Secure the TV bracket arms to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are centered and firmly tightened.
Image: Illustration of available VESA patterns (100x100, 200x200, 300x300, 400x400, 600x400, 700x400) for TV bracket attachment.
- Mount Wall Plate:
Position the wall plate on the wall, aligning it with the marked stud centers. Drill pilot holes and secure the wall plate using the provided lag bolts. Ensure the mount is level before tightening completely.
Image: Key dimensions of the wall mount, showing a width of 30.51 inches (77.46 cm) and height of 19.69 inches (50.01 cm). Minimum depth from wall is 2.84 inches (7.21 cm). The mount holds up to 130 lbs (58.97 kg).
- Hang TV:
Carefully lift the TV and hook the attached TV brackets onto the wall plate assembly. Secure the TV to the mount using the locking mechanisms or screws as per the manual.
- Cable Management:
Utilize the integrated cable management clips to route and secure all cables along the mount arms, maintaining a clean and organized appearance.
Operating the Mount
The Sanus MLF13-B1 offers flexible viewing options:
- Extension: The mount extends up to 14 inches (35.56 cm) from the wall, allowing you to pull your TV forward for better viewing angles.
- Swivel: Swivel your TV up to 45 degrees left or right (depending on TV size and wall position) to direct the screen towards your viewing area.
- Tilt: Utilize the Virtual Axis technology for 11 degrees of effortless tilt motion. This helps reduce glare and optimize your viewing experience. Adjustments can typically be made with a touch of a finger or by loosening/tightening specific knobs.
- Level Adjustment: Post-installation level adjustment allows the TV to "roll" up to 4 degrees clockwise and counterclockwise, ensuring it is perfectly level even if the initial installation was slightly off.
Image: Visual representation of the mount's movement capabilities, highlighting 11 degrees of tilt and up to 45 degrees of swivel for an optimal viewing experience.
Image: A side profile of the mount demonstrating its extension capability of 14 inches and an 11-degree tilt range.
Image: Demonstrates the ease of adjusting the TV's position (extend, swivel, tilt) without requiring additional tools.
Image: Illustrates the ability to slide the TV horizontally along the wall plate for precise centering after installation.
Maintenance
To ensure continued performance and safety of your Sanus MLF13-B1 mount:
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight.
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Lubrication: The articulating joints are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult Sanus support.
Troubleshooting
If you encounter issues with your mount, refer to the following common solutions:
- TV is not level: Use the post-installation level adjustment feature to rotate the TV slightly clockwise or counterclockwise until level.
- Mount is difficult to move/adjust: Check for any obstructions. Ensure all adjustment knobs are not overtightened. Some joints may have adjustable tension screws (refer to the full manual for specific locations).
- TV appears to be sagging: Re-check the weight of your TV against the mount's maximum capacity. Ensure all mounting hardware is securely fastened to both the TV and the wall studs.
- Cables are visible/tangled: Re-route cables through the integrated cable management clips.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MLF13-B1 |
| Screen Size Compatibility | 37 - 80 inches |
| Maximum Weight Capacity | 130 lbs (58.97 kg) |
| Mounting Type | Articulating Universal Wall Mount |
| Movement Type | Articulating (Extend, Swivel, Tilt) |
| Extension from Wall | Up to 14 inches (35.56 cm) |
| Maximum Tilt Angle | 11 Degrees |
| Post-Installation Level Adjustment | Up to 4 Degrees (clockwise/counterclockwise) |
| Material | Metal |
| Product Dimensions | 31.89 x 12.2 x 4.21 inches (Wall Plate) |
| Item Weight | 18.9 pounds (8.57 kg) |
| Certifications | UL-Listed |
Image: Confirmation of UL Listed certification and a 5-year limited warranty, ensuring product quality and safety.
Warranty and Support
The Sanus MLF13-B1 Articulating Universal Wall Mount comes with a 5-year limited warranty. For warranty claims, technical assistance, or missing parts, please contact Sanus Customer Service.
Sanus Customer Service: Refer to the contact information provided in your product packaging or visit the official Sanus website for support resources.
