Introduction
This Classic replacement remote control is specifically designed for direct use with your IKEA UPPLEVA 46 television. It provides all essential functions of the original remote without requiring any complex programming. Simply insert the batteries, and the remote is ready for immediate operation.
The Classic range of remote controls has been a preferred choice for European TV repair technicians for over a decade. Unlike many generic universal remotes, this Classic remote is custom-engineered to integrate all functions of the original remote it replaces. The mechanical design maintains the quality of the original product, and the buttons, along with their associated text, are optimized for clear readability and ease of use. To meet the demands of repair professionals, the materials and components used have been selected to ensure a reliable product.
Setup
Battery Installation
The remote control requires two AAA batteries for operation. Please note that while some product specifications may indicate batteries are included, it is advisable to check your package contents upon receipt. If not included, please acquire two AAA batteries.
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
No programming is necessary. The remote is pre-configured for the IKEA UPPLEVA 46.
Operating Instructions
This replacement remote control is designed to replicate the full functionality of your original IKEA UPPLEVA 46 remote. While the button layout may differ slightly from the original, all core functions are accessible.
Key Functions Overview
- Power Button (⏻): Turns the TV on or off.
- Numeric Keypad (0-9): Direct channel selection.
- Volume Up/Down (VOL +/-): Adjusts the audio volume.
- Channel Up/Down (CH +/- or P +/-): Changes the television channel.
- Mute (🔇): Mutes or unmutes the television sound.
- Input/Source (INPUT): Selects the input source (e.g., HDMI, AV).
- Menu (MENU): Accesses the TV's main menu.
- Navigation Buttons (Arrows & OK): Navigates through menus and confirms selections.
- Return/Back (RETURN): Returns to the previous screen or menu.
- Exit (EXIT): Exits the current menu or function.
- Color Buttons (Red, Green, Yellow, Blue): Used for specific functions within certain TV menus or applications, as indicated on screen.
For specific advanced functions or features not explicitly listed, refer to your IKEA UPPLEVA 46 television's original user manual, as this remote is designed to mimic its functionality.
Maintenance
Battery Replacement
When the remote control's performance degrades (e.g., reduced range, intermittent response), it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's surface or internal components.
- Do not immerse the remote control in water or any other liquid.
- Keep the remote control away from direct sunlight and extreme temperatures.
- Avoid dropping the remote control or subjecting it to strong impacts.
Troubleshooting
If you encounter issues with your Classic replacement remote control, please refer to the following common troubleshooting steps:
- Remote Not Responding:
- Ensure the batteries are inserted correctly with the proper polarity (+/-).
- Replace the batteries with fresh ones. Weak batteries are a common cause of remote control issues.
- Point the remote directly at the TV's infrared receiver. Ensure there are no obstructions between the remote and the TV.
- Limited Range:
- Check battery strength.
- Ensure the remote's infrared emitter (at the front) is clean and unobstructed.
- Verify that the TV's infrared receiver is not blocked.
- Certain Buttons Not Working:
- This remote is designed to replicate original functions. However, some highly specific or programmable functions of the original IKEA remote may not be supported.
- Ensure the button is not physically stuck or damaged.
- TV Not Responding to Any Remote:
- Try unplugging the TV from the power outlet for a few minutes, then plug it back in. This can sometimes reset the TV's internal systems.
- If the original IKEA remote also fails to work, the issue might be with the TV's infrared receiver.
If these steps do not resolve the issue, please refer to the "Warranty and Support" section for further assistance.
Specifications
| Brand | Classic |
| Model Number | 5053856224491 |
| Compatible Devices | IKEA UPPLEVA 46 |
| Connectivity Technology | Infrared |
| Controller Type | Remote Control |
| Maximum Range | 10 Meters |
| Batteries Required | 2 x AAA (check package for inclusion) |
| Special Feature | Direct Replacement (not a generic universal remote, but designed for specific model) |
Warranty and Support
Warranty Information
This Classic replacement remote control comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, troubleshooting beyond this manual, or warranty claims, please contact the retailer or the manufacturer's customer service. Refer to the packaging or purchase documentation for specific contact details.
For general inquiries or to learn more about Classic products, you may visit the brand's official website if available.
