Erbesi Dormiglione White Changing Table Bathtub User Manual

Introduction

The Erbesi Dormiglione White Changing Table Bathtub is a versatile piece of nursery furniture designed to provide a safe and convenient space for changing and bathing your baby. This unit features a comfortable changing pad, an integrated bathtub, and three spacious drawers for storing baby essentials. Please read this manual carefully before assembly and use to ensure safe and proper operation.

Figure 1: The Erbesi Dormiglione White Changing Table Bathtub. This image shows the complete unit, featuring a white finish, three drawers with round white knobs, and a white changing pad on top. A small decorative bear emblem is visible on the top drawer. The unit is equipped with four caster wheels for mobility.

Safety Information

• Always keep your child within arm's reach when using the changing table or bathtub.
• Never leave your child unattended on the changing table or in the bathtub.
• Ensure all assembly hardware is securely tightened before use. Periodically check and re-tighten as needed.
• Do not use the product if any parts are broken, torn, or missing. Contact customer support for replacement parts.
• Keep small parts and plastic bags away from children to prevent choking hazards.
• Always test the water temperature before placing your child in the bathtub.
• Do not overload the drawers.
• Ensure the changing pad is securely placed and stable before use.

Setup and Assembly

This section provides general guidelines for assembling your Erbesi Dormiglione Changing Table Bathtub. Refer to the specific assembly instructions included in your product packaging for detailed, step-by-step diagrams and hardware lists.

Before You Begin:

• Unpack all components and verify that all parts listed in the packaging are present and undamaged.
• Clear a spacious, flat area for assembly.
• Have the necessary tools ready (e.g., screwdriver, hammer, as specified in your assembly guide).

General Assembly Steps:

1. Assemble the Frame: Connect the side panels, back panel, and base using the provided hardware. Ensure all connections are secure.
2. Install Drawers: Assemble the drawer boxes according to the instructions. Install drawer slides onto the main frame and then insert the assembled drawers.
3. Attach Wheels: Securely attach the four caster wheels to the bottom of the unit. Ensure they are firmly in place for stability and mobility.
4. Integrate Bathtub: Place the integrated bathtub into its designated compartment. Ensure it sits securely and is easily accessible for filling and draining.
5. Position Changing Pad: Place the changing pad securely on top of the unit. Some models may have clips or straps to secure the pad; ensure these are utilized if present.
6. Final Check: Before first use, double-check all screws, bolts, and connections to ensure they are tight and the unit is stable.

Operating Instructions

Using the Changing Table:

• Place the changing pad on the top surface of the unit.
• Lay your baby gently on the changing pad. Always keep one hand on your baby to prevent falls.
• Have all necessary changing supplies (diapers, wipes, cream) within easy reach in the drawers.
• After changing, dispose of soiled items properly and clean the changing pad if necessary.

Using the Bathtub:

• Remove the changing pad to access the integrated bathtub.
• Fill the bathtub with warm water. Always check the water temperature with your elbow or a thermometer before placing your baby in the tub. The ideal temperature is around 37-38°C (98.6-100.4°F).
• Gently place your baby into the bathtub. Always support your baby's head and neck.
• After bathing, drain the water using the integrated drain plug or hose (if applicable).
• Dry the bathtub thoroughly to prevent mold and mildew.
• Replace the changing pad once the bathtub is dry and not in use.

Using the Drawers:

• The three drawers provide ample storage for diapers, clothing, towels, and other baby essentials.
• Organize items for easy access during changing or bathing.
• Do not overload drawers to ensure smooth operation and prevent damage.

Maintenance and Care

• Cleaning the Unit: Wipe down the wooden surfaces with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry thoroughly.
• Cleaning the Changing Pad: The changing pad can be wiped clean with a damp cloth and mild soap. Ensure it is completely dry before reuse.
• Cleaning the Bathtub: After each use, rinse the bathtub with clean water and wipe it dry to prevent soap scum buildup and mildew.
• Hardware Check: Periodically check all screws, bolts, and fasteners to ensure they are tight. Re-tighten if necessary.
• Storage: If storing the unit for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Do Not Wash in Dishwasher: As per product specifications, this item is not dishwasher safe.

Troubleshooting

Specifications

• Product Weight: 44 kg
• Manufacturer Reference: 35409
• Gender: Unisex
• Number of Products: 1
• Batteries Required: No
• Dishwasher Safe: No
• Portable: No
• ASIN: B00UIAJUEE
• First Available Date: March 10, 2015

Warranty and Support

For specific warranty information regarding your Erbesi Dormiglione Changing Table Bathtub, please refer to the warranty card included with your purchase or visit the official Erbesi website. Keep your proof of purchase for warranty claims.

If you encounter any issues not covered in the troubleshooting section or require replacement parts, please contact Erbesi customer support. Contact details can typically be found on the manufacturer's website or in your product documentation.