Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Amba Radiant Square RSWP-B 10-Bar Plug-in Towel Warmer. Please read all instructions carefully before use and retain this manual for future reference.
The Amba Radiant Square RSWP-B is designed to dry and warm towels and other garments, contributing to a more comfortable bathroom environment. It features 10 square horizontal bars, with both vertical and horizontal bars heating up to facilitate drying.
Image: Amba Radiant Square RSWP-B 10-Bar Plug-in Towel Warmer in brushed finish.
Safety Information
- Read all instructions before installing or using this appliance.
- This appliance is for household use only.
- Do not immerse the towel warmer in water or other liquids.
- Ensure the power cord is not damaged. If damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Close supervision is necessary when the appliance is used by or near children.
- Do not use this appliance for purposes other than its intended use.
- The towel warmer surface will be hot during operation. Exercise caution to avoid burns.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Package Contents
Please verify that all components are present before beginning installation:
- Amba Radiant Square RSWP-B 10-Bar Plug-in Towel Warmer Unit
- Mounting Hardware
- Instruction Manual
Note: Additional accessories such as a double gang plate for switch integration or a wet-rated kit are sold separately.
Setup and Installation
The Amba Radiant Square RSWP-B is a plug-in model designed for wall-mounted installation. It comes with a 5-foot cord and an integrated On/Off switch for convenience.
Mounting the Towel Warmer
- Select a suitable wall location, ensuring it is within reach of a grounded electrical outlet.
- Mark the drilling points for the mounting brackets according to the provided template (if included) or product dimensions.
- Drill pilot holes and secure the mounting brackets to the wall using the supplied hardware.
- Carefully attach the towel warmer unit to the secured mounting brackets.
- Plug the unit into a standard 110-volt grounded electrical outlet.
Image: Amba Radiant Square Towel Warmer installed in a bathroom, showing the plug-in connection.
Integrated On/Off Switch
This model includes an integrated On/Off switch located at the bottom of a vertical bar for easy access.
Image: Close-up of the integrated On/Off switch on the towel warmer.
Wet-Rated Kit (Optional)
For installations in wet rooms or other high-moisture areas, a Jeeves wet-rated kit add-on is available. This kit allows for safe and secure installation in NEC Zones 1 and 2, providing greater flexibility for placement near showers or bathtubs. Consult the National Electrical Code (NEC) for specific zone definitions and requirements.
Video: This video demonstrates installation and switch options for Jeeves Heated Towel Racks, including hardwired connections and various switch types. It also shows the use of a double gang plate for switch integration.
Operating Instructions
To operate your Amba Radiant Square Towel Warmer:
- Ensure the unit is properly installed and plugged into a grounded outlet.
- Flip the integrated On/Off switch to the 'On' position. A small indicator light may illuminate.
- Allow 10-15 minutes for the unit to heat up. Additional time is required to warm and dry towels.
- Place towels or garments over the horizontal bars. For delicate items, drape them over a towel already on the warmer to prevent direct contact with the heated bars.
- To turn off the unit, flip the integrated On/Off switch to the 'Off' position.
Applications and Uses
The towel warmer can be used in various locations beyond bathrooms, such as laundry rooms, mud rooms, and wet rooms, to dry delicates, jackets, bathing suits, or other clothing items that cannot be tumble-dried. The heated vertical bars also contribute to drying items hung from them, such as bathrobes or washcloths.
Image: Amba towel warmer installed in a laundry room, demonstrating versatile use.
Video: This video illustrates various applications and uses for Jeeves Heated Towel Racks in different home environments.
Video: This video highlights the benefit of warm, dry towels and bathrobes after showering or bathing.
Maintenance
To maintain the appearance and performance of your Amba Towel Warmer:
- Ensure the unit is unplugged and cool before cleaning.
- Wipe the surface with a soft, damp cloth.
- Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed stainless steel finish.
- Regular cleaning helps prevent mineral buildup and maintains the unit's aesthetic.
Troubleshooting
If you encounter issues with your towel warmer, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Towel warmer does not heat up. | Unit is not plugged in or switch is off. No power to the outlet. Internal heating element issue. | Ensure the unit is securely plugged in and the integrated switch is in the 'On' position. Check the electrical outlet with another appliance. If the issue persists, contact customer support. |
| Towels are not drying effectively. | Overloading the warmer. Insufficient heating time. Poor air circulation. | Avoid placing too many towels on the warmer at once. Allow adequate time for heating and drying (unit takes 10-15 minutes to heat, more for towels). Ensure proper ventilation in the room. |
| Unit is excessively hot. | Normal operation. | The surface of the towel warmer will be hot during operation. This is normal. Always exercise caution. |
Specifications
- Model: Radiant Square Plug-In (RSWP-B)
- Brand: Amba
- Color: Brushed
- Material: 304 Stainless Steel
- Finish Type: Brushed
- Installation Type: Wall-Mounted
- Shape: Rectangular
- Number of Bars: 10 (Square horizontal bars; all vertical and horizontal bars heat up)
- Power: 150 Watts
- Current: 1.3 Amps
- Voltage: 110 Volts
- Cord Length: 5 feet
- Integrated Switch: Yes (On/Off)
- Product Dimensions: 34 x 27 x 4 inches
- Item Weight: 12 Pounds
- UPC: 810124020590
Warranty and Support
The Amba Radiant Square RSWP-B 10-Bar Plug-in Towel Warmer comes with a 2-year warranty.
For warranty claims, technical assistance, or further inquiries, please contact Amba Products customer support. Refer to the product packaging or the official Amba website for the most current contact information.