Introduction
Thank you for purchasing the Edifier Hecate G2000 Active RGB Gaming Speakers. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new speakers. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience. Keep this manual for future reference.
Safety Information
To ensure safe and optimal performance, please observe the following safety guidelines:
- Do not expose the speakers to rain, moisture, or extreme temperatures.
- Avoid placing the speakers near heat sources or in direct sunlight.
- Do not open the speaker cabinet. Refer all servicing to qualified personnel.
- Use only the power adapter supplied with the product.
- Ensure proper ventilation around the speakers.
- Keep out of reach of children.
Package Contents
Carefully unpack the box and ensure all items listed below are present and in good condition:
- 2 x Edifier Hecate G2000 Speakers
- 1 x Power Adapter
- 1 x 3.5mm Audio Cable
- 1 x USB Cable
Image: Contents of the Edifier G2000 speaker package, including two white speakers, a power adapter, a 3.5mm audio cable, and a USB cable.
Product Overview
Speaker Layout and Controls
Familiarize yourself with the various parts and controls of your G2000 speakers.
Image: Angled view of two white G2000 speakers, showing the front and side with blue RGB lighting, and the rear panel of one speaker with controls and ports.
Rear Panel Controls and Ports
Image: Close-up of the rear panel of a white G2000 speaker, clearly showing the USB, AUX, and power input ports, along with control buttons.
- Volume Knob: Rotate to adjust volume. Press to cycle through input modes (Bluetooth, USB, AUX).
- RGB Light Button: Press to cycle through 12 different RGB lighting effects. Press and hold to turn RGB lights off/on.
- Sound Mode Button: Press to cycle through Gaming, Movie, and Music sound modes.
- USB Input: Connect to a computer for digital audio playback.
- AUX Input: Connect to devices using a 3.5mm audio cable.
- Power Input: Connect the supplied power adapter.
Setup
Speaker Placement
Place the speakers on a stable, flat surface, ideally equidistant from your listening position for optimal stereo imaging. Ensure there is adequate space behind the speakers for cable connections and ventilation.
Image: Two white G2000 speakers positioned on a desk next to a computer monitor, with a person using a keyboard.
Power Connection
- Connect the power adapter to the Power Input port on the back of the main speaker.
- Plug the power adapter into a wall outlet. The speakers will power on automatically, indicated by an initial sound and RGB lighting.
Connecting to Audio Sources
Bluetooth Connection
- Press the Volume Knob to cycle through input modes until the Bluetooth indicator light flashes. This indicates the speakers are in pairing mode.
- On your audio device (smartphone, tablet, computer), enable Bluetooth and search for "EDIFIER G2000".
- Select "EDIFIER G2000" to pair. Once connected, the Bluetooth indicator light will be solid.
USB Connection
- Connect one end of the supplied USB cable to the USB Input port on the back of the main speaker.
- Connect the other end of the USB cable to a USB port on your computer.
- Press the Volume Knob to cycle through input modes until the USB indicator light is solid. Your computer should recognize the speakers as an audio output device.
AUX Connection
- Connect one end of the supplied 3.5mm audio cable to the AUX Input port on the back of the main speaker.
- Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., TV, game console, MP3 player).
- Press the Volume Knob to cycle through input modes until the AUX indicator light is solid.
Image: Close-up of the speaker's rear panel with cables connected, illustrating Bluetooth, USB, and 3.5mm AUX connectivity options.
Operating Instructions
Power On/Off
The speakers power on automatically when connected to power. To turn off, disconnect the power adapter. Note: Some users have reported an audible startup sound that cannot be disabled.
Volume Control
Rotate the Volume Knob clockwise to increase volume and counter-clockwise to decrease volume.
Changing Input Modes
Press the Volume Knob briefly to cycle through the available input modes: Bluetooth, USB, and AUX. The corresponding indicator light will illuminate.
Sound Modes
The G2000 speakers offer three optimized sound modes:
- Gaming Mode: Enhanced soundstage and positional audio for gaming.
- Movie Mode: Optimized for dialogue clarity and cinematic effects.
- Music Mode: Balanced audio reproduction for general music listening.
Press the Sound Mode Button to switch between these modes. The indicator light will change to reflect the selected mode.
Image: A hand adjusting a knob on a speaker, with glowing RGB lights, illustrating the sound modes and RGB effects.
RGB Lighting Control
The speakers feature 12 different RGB lighting effects to enhance your gaming environment.
- Press the RGB Light Button briefly to cycle through the 12 available lighting effects.
- Press and hold the RGB Light Button for approximately 2 seconds to turn the RGB lights off or on.
Maintenance
Proper maintenance ensures the longevity and performance of your speakers.
- Cleaning: Use a soft, dry cloth to clean the speaker surfaces. Do not use abrasive cleaners, waxes, or solvents.
- Storage: If storing the speakers for an extended period, disconnect them from power and store them in a cool, dry place.
- Avoid Liquids: Do not spill liquids on the speakers. If liquid enters the speaker, immediately disconnect power and contact customer support.
Troubleshooting
If you encounter any issues with your G2000 speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Power not connected; incorrect input mode; volume too low; audio cable loose/faulty. | Ensure power is connected. Cycle through input modes. Increase volume. Check audio cable connections. |
| Bluetooth connection fails | Speakers not in pairing mode; device too far; interference. | Ensure speakers are in Bluetooth pairing mode (flashing indicator). Move device closer. Restart speakers and device. |
| RGB lights not working | Lights turned off; faulty unit. | Press and hold the RGB Light Button to turn lights on. If issue persists, contact support. |
| Distorted sound | Volume too high; faulty audio source/cable. | Reduce volume on speakers and source device. Try a different audio source or cable. |
| Annoying startup sound | This is a design feature. | This sound cannot be disabled. Consider leaving speakers powered on if this is a significant concern. |
Specifications
Detailed technical specifications for the Edifier Hecate G2000 speakers:
- Brand: Edifier
- Model Name: G2000
- Maximum Speaker Output Power: 32 Watts
- Frequency Response: 98 Hz
- Connectivity Technology: Auxiliary, USB, Bluetooth
- Audio Output Mode: Stereo
- Mounting Type: Table Mount
- Material: White Plastic
- Speaker Type: Indoor
- Special Feature: Bluetooth, RGB Lighting
- Color: White
- Control Method: Push Button
- Speaker Size: 7 Centimeters (Woofer), 1 Inch (Tweeter)
- Bluetooth Range: 10 Meters
- Compatible Devices: Laptop, Smartphone, Tablet, Television
- Power Source: Electric Cable
- Item Dimensions (D x W x H): 10.5 x 10.6 x 13 Centimeters
- Item Weight: 1.9 Kilograms
Image: Diagram showing the dimensions of a single Edifier G2000 speaker in centimeters.
Warranty and Support
Warranty Information
The Edifier Hecate G2000 speakers come with a 2-year manufacturer warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or any questions regarding your Edifier Hecate G2000 speakers, please contact Edifier customer support through their official website or the retailer where you purchased the product.
Please note: Contact information may vary by region. Refer to your product packaging or Edifier's official website for the most up-to-date support details.
