1. Product Overview
The EZ-ACCESS TRANSITIONS Angled Entry Ramp is a standalone threshold ramp designed to provide safe and smooth access over doorways, uneven surfaces, or single-step rises. It features independently adjustable legs with swivel feet, allowing for precise vertical adjustment to accommodate varying heights and surface types. Constructed from high-strength aluminum, this ramp is durable and resistant to rust and corrosion, making it suitable for both indoor and outdoor use. The surface includes an extruded, slip-resistant tread for enhanced traction.
This model, TAER 24, measures 24 inches in length and 36.25 inches in width, with an adjustable height range from approximately 1.375 inches to 5.875 inches. It has a weight capacity of 700 pounds.
Image 1.1: The EZ-ACCESS TRANSITIONS Angled Entry Ramp, Model TAER 24, shown in a typical doorway setup. This ramp provides a smooth transition over thresholds.
Video 1.1: An overview of the EZ-ACCESS TRANSITIONS Angled Entry Ramp, demonstrating its features and how it functions to provide accessible entry.
2. Safety Information
Read all instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage to the product.
- Always ensure the ramp is securely positioned and stable before use.
- Do not exceed the maximum weight capacity of 700 pounds.
- Ensure the adjustable legs are properly set and locked to match the threshold height and surface.
- Keep the ramp surface clean and free from debris, ice, or water to maintain slip resistance.
- Inspect the ramp regularly for any signs of wear, damage, or loose components. Do not use if damaged.
- Use caution when traversing the ramp, especially with mobility devices.
- This ramp is designed for single-step rises and thresholds. Do not use for applications beyond its intended design.
3. Components
The EZ-ACCESS TRANSITIONS Angled Entry Ramp consists of the following main components:
- Ramp Body: The main aluminum structure with a slip-resistant tread surface.
- Adjustable Legs: Two legs located at the higher end of the ramp, used to adjust the ramp's height.
- Swivel Feet: Attached to the adjustable legs, these feet pivot to adapt to uneven surfaces.
- Angled Ground Plate: The lower end of the ramp designed to sit flush with the ground, creating a smooth transition.
- Anchoring Holes: Pre-drilled holes for optional permanent installation (hardware not always included, check packaging).
4. Setup and Installation
Follow these steps to properly set up your EZ-ACCESS TRANSITIONS Angled Entry Ramp:
- Position the Ramp: Place the ramp with its higher edge against the threshold or raised surface you wish to access. Ensure the angled ground plate rests firmly on the lower surface.
- Adjust the Legs: The ramp features adjustable legs with swivel feet. Turn the legs clockwise or counter-clockwise to raise or lower the ramp until the top edge is flush with the threshold. The swivel feet will adapt to the angle of the ground, providing stability.
- Check Stability: Once adjusted, gently test the ramp's stability by applying pressure. Ensure there is no rocking or movement. Re-adjust the legs if necessary.
- Optional Anchoring: For permanent installation or increased security, the ramp includes pre-drilled holes. Use appropriate hardware (not included) to secure the ramp to the ground or threshold. Consult a professional if unsure about anchoring methods for your specific surface.
Image 4.1: Close-up view of an adjustable leg with a swivel foot, demonstrating the mechanism for height adjustment.
Image 4.2: Diagram illustrating the ramp's features, including adjustable legs and pre-drilled holes for anchoring.
Video 4.1: A demonstration of the EZ-Access Transitions Aluminum Threshold Ramp, highlighting its ease of setup and use.
5. Operating Instructions
Using the EZ-ACCESS TRANSITIONS Angled Entry Ramp is straightforward once properly installed:
- Approach the ramp squarely and at a slow, controlled speed.
- For manual wheelchairs, ensure an attendant is present if the user is not confident or if the incline is steep.
- For power wheelchairs and scooters, maintain a steady speed and avoid sudden turns on the ramp.
- Walkers and rollators should be pushed steadily, ensuring all wheels are on the ramp surface.
- Always look ahead and be aware of your surroundings.
Image 5.1: A user navigating a doorway with a knee scooter, demonstrating the ramp's function for mobility devices.
Image 5.2: The EZ-ACCESS Angled Entry Ramp seamlessly installed in a doorway, ready for use.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your ramp:
- Cleaning: Clean the aluminum surface with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish or slip-resistant tread. Rinse thoroughly and allow to dry completely before use.
- Inspection: Periodically inspect the ramp for:
- Any bends, cracks, or structural damage to the aluminum.
- Wear or damage to the slip-resistant tread.
- Loose or damaged adjustable legs or swivel feet.
- Corrosion or rust (though aluminum is highly resistant, inspect for any unusual discoloration).
- If any damage is found, discontinue use immediately and contact EZ-ACCESS for assistance.
7. Troubleshooting
Here are some common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ramp is unstable or rocks. | Legs are not evenly adjusted or surface is uneven. | Re-adjust the height of the adjustable legs until the ramp is stable and flush with the threshold. Ensure swivel feet are flat on the ground. |
| Ramp slides during use. | Ramp is not properly positioned or anchored; surface is wet or slippery. | Ensure the ramp is firmly against the threshold. Clean the ground surface. Consider optional anchoring for increased stability. |
| Difficulty moving mobility device over ramp. | Ramp angle is too steep for the device or user. | Verify the ramp height is appropriate for the rise. Ensure the ramp is correctly positioned to minimize the angle. |
8. Specifications (Model TAER 24)
| Feature | Detail |
|---|---|
| Model Number | TAER 24 |
| Product Dimensions (L x W x H) | 24"L x 36.25"W x 1.6"H (base height) |
| Adjustable Height Range | 1.375" to 5.875" (approximate) |
| Item Weight | 10.4 Pounds |
| Load Capacity | 700 Pounds |
| Material Type | Aluminum |
| Color | Silver |
| Is Foldable | No |
| UPC | 048396001560 |
9. Warranty and Support
Manufacturer Warranty: This EZ-ACCESS product comes with a 3-year limited warranty. Please refer to the warranty documentation included with your purchase for full details on coverage and terms.
Customer Support: For further assistance, technical support, or warranty claims, please visit the official EZ-ACCESS store or contact their customer service directly. You can find more information and contact details on the EZ-ACCESS Brand Store.