Audiovox APS997E

Audiovox APS997E Two-Way Remote Start System User Manual

Comprehensive instructions for the operation and maintenance of your Audiovox APS997E remote start and security system.

1. Introduction

This manual provides detailed instructions for the Audiovox APS997E Two-Way Remote Start and Security System. It covers system components, installation considerations, operational procedures, maintenance tips, and troubleshooting guidance. Please read this manual thoroughly to ensure proper use and to maximize the benefits of your security system.

2. Product Overview

The Audiovox APS997E is a sophisticated two-way remote start and security system designed to provide convenience and protection for your vehicle. Key features include:

  • One five-button metal 2-way LCD command confirming transmitter.
  • Programmed transmitter notification.
  • Glass mount antenna with built-in LED light and valet switch.
  • Single or two-user programmable with separate control outputs.
  • Selectable run times for remote start.
  • 24-hour time start mode.

System Components

The system includes the main control unit, two-way LCD remote, standard remote, wiring harnesses, antenna, and various sensors. Refer to the images below for a visual representation of the system components.

Audiovox APS997E Remote Start System packaging and remotes

Figure 2.1: Packaging and included remote controls for the Audiovox APS997E system. This image displays the main product box, highlighting the "Longer Range" and "Two-Way 5-Button LCD Remote Control" features, along with the two distinct remote fobs.

Audiovox APS997E Remote Start System components

Figure 2.2: All components included with the Audiovox APS997E system. This includes the main control module, wiring harnesses, antenna, temperature sensor, siren, and both the two-way LCD remote and the standard remote, along with the quick installation guide.

3. Setup and Installation

Installation of the Audiovox APS997E system requires technical expertise and should ideally be performed by a qualified professional. Incorrect installation can lead to vehicle damage or system malfunction. The system includes a Quick Installation Guide for reference.

General Installation Considerations:

  • Wiring: Proper connection to vehicle's electrical system, including ignition, power, ground, and accessory circuits.
  • Antenna Placement: The glass-mount antenna should be positioned for optimal signal reception.
  • Module Mounting: Securely mount the main control module in a discreet and protected location within the vehicle.
  • Sensor Connections: Connect all security sensors, such as shock sensors and door triggers, according to the detailed installation manual.
  • Programming: After physical installation, the system and remotes must be programmed to the vehicle.

Warning: Attempting self-installation without proper knowledge and tools may void your warranty and cause damage to your vehicle.

4. Operating Instructions

The Audiovox APS997E system utilizes a five-button remote control for various functions. The two-way LCD remote provides visual and audible confirmation of commands.

Remote Control Functions:

  • Arm/Lock: Press the lock button once to arm the security system and lock the vehicle doors. The LCD remote will confirm the command.
  • Disarm/Unlock: Press the unlock button once to disarm the security system and unlock the vehicle doors. The LCD remote will confirm the command.
  • Remote Start: Press and hold the remote start button (often indicated by a circular arrow or "Start" icon) for approximately 3 seconds to remotely start your vehicle. The LCD remote will display engine status and countdown the run time.
  • Trunk Release: Press and hold the trunk release button (often indicated by a trunk icon) for approximately 3 seconds to open the vehicle's trunk or hatch.
  • Panic/Car Finder: Press the panic button (often indicated by a bell or horn icon) to activate the siren and flash the lights, useful for emergencies or locating your vehicle in a crowded parking lot.
  • Auxiliary Functions: Additional buttons or button combinations may control programmable auxiliary outputs, such as power windows or other accessories. Refer to the full installation manual for specific programming.

Two-Way Communication:

The LCD remote provides real-time feedback on your vehicle's status, including:

  • Confirmation of commands (lock, unlock, start).
  • Security system alerts (e.g., door open, shock sensor triggered).
  • Vehicle status (e.g., door locked/unlocked, engine running).

Advanced Features:

  • Selectable Run Times: The remote start duration can be customized. Consult the full manual for programming details.
  • 24-Hour Time Start Mode: Allows scheduling the vehicle to start at a specific time within a 24-hour period.
  • Valet Mode: Temporarily disables the security system features, allowing vehicle servicing without triggering the alarm. Activated via the valet switch on the antenna.

5. Maintenance

To ensure the longevity and optimal performance of your Audiovox APS997E system, follow these maintenance guidelines:

  • Remote Battery Replacement: The two-way LCD remote requires 1 AAA battery. Replace the battery when the low battery indicator appears on the LCD screen or when remote range decreases significantly.
  • Remote Care: Avoid exposing remotes to extreme temperatures, moisture, or direct impact. Clean with a soft, dry cloth.
  • System Inspection: Periodically check the wiring and connections of the main control unit and sensors for any signs of wear or damage. This should be done by a professional.

6. Troubleshooting

If you experience issues with your Audiovox APS997E system, refer to the following common troubleshooting steps. For complex issues, professional assistance is recommended.

ProblemPossible CauseSolution
Remote not responding.Low or dead remote battery. Out of range. Interference.Replace remote battery. Move closer to the vehicle. Avoid areas with high radio frequency interference.
Vehicle does not remote start.Hood pin switch open. Vehicle not in park. Low fuel. System in Valet Mode.Ensure hood is closed. Confirm vehicle is in park. Check fuel level. Exit Valet Mode.
Alarm triggers unexpectedly.Sensitivity of shock sensor too high. Faulty sensor.Adjust shock sensor sensitivity (refer to installation manual). Inspect sensors for damage.
Doors do not lock/unlock.Wiring issue. Vehicle's door lock system malfunction.Check wiring connections (professional assistance recommended). Verify vehicle's door lock system functionality.

If these steps do not resolve the issue, please contact Audiovox customer support or a certified installer.

7. Specifications

FeatureDetail
Model NumberAPS997E
Product Dimensions4 x 4 x 4 inches
Item Weight2.18 pounds
Remote Battery1 AAA battery required
Noise Level65 dB (Siren)
Remote Control IncludedYes
Compatible DevicesCars

8. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact your authorized Audiovox dealer. Audiovox provides technical support for its products.

For complete installation guides and technical support, you may visit the manufacturer's website or contact their support line:

Note: Product specifications and features are subject to change without notice. Always refer to the latest documentation provided by the manufacturer.

Related Documents - APS997E

Preview Audiovox 5BCR/5BCR03/5BCR05 Programming Guide
This programming guide provides instructions for setting up and using the Audiovox 5BCR, 5BCR03, and 5BCR05 car alarm and remote start systems. It details transmitter programming, channel configuration, erasing lost transmitters, and battery replacement procedures.
Preview Audiovox PRO-9175FT4 4-Channel Remote Start and Keyless Entry System Installation Manual
Detailed installation instructions and wiring guide for the Audiovox PRO-9175FT4 4-Channel Remote Start and Keyless Entry System, covering component installation, wiring connections, and feature programming.
Preview Audiovox CDM-4500 User Manual: Dual Mode CDMA/AMPS Handheld Cellular Telephone
Explore the features and operations of the Audiovox CDM-4500, a dual-mode CDMA/AMPS handheld portable cellular telephone. This user manual provides detailed instructions on setup, usage, phonebook management, and advanced functions.
Preview Audiovox CDM-9000 User Manual: Features, Operation, and Specifications
Comprehensive user manual for the Audiovox CDM-9000 Tri-Mode CDMA/AMPS handheld portable cellular telephone. Learn about its features, system configuration, operation, phonebook, messaging, and more.
Preview Audiovox FR-130 Two-Way Family Radio Owner's Manual
This manual provides instructions for operating the Audiovox FR-130 Two-Way Family Radio, including features, controls, battery installation, operation, and warranty information.
Preview AUDIOVOX AXC 571 Owner's Manual - Setup and Operation Guide
Comprehensive guide for the AUDIOVOX AXC 571 audio system. Learn how to set up, operate, and troubleshoot your device with detailed instructions and safety information.