Nerf B1696

Nerf Rebelle Arrow Revolution Bow Toy

Model: B1696 | Brand: Nerf

Introduction

The Nerf Rebelle Arrow Revolution Bow Toy is designed for engaging and active play. This manual provides detailed instructions for assembly, safe operation, and care of your new bow. Please read all instructions carefully before use.

Important Safety Information

  • WARNING: Do not aim at eyes or face. To avoid injury, use only arrows designed for this product. Do not modify arrows or bow. Discontinue use if either end of arrow shaft becomes exposed.
  • Adult supervision is recommended during play.
  • Ensure play area is clear of obstacles and other people before firing.
  • Keep away from pets and small children to prevent accidental injury or ingestion of small parts.

Package Contents

Your Nerf Rebelle Arrow Revolution Bow Toy package includes:

  • 1 x Nerf Rebelle Arrow Revolution Bow
  • 6 x Foam Arrows
Nerf Rebelle Arrow Revolution Bow in original packaging

Image: The Nerf Rebelle Arrow Revolution Bow in its original packaging, showing the bow and included arrows.

Setup and Assembly

The Nerf Rebelle Arrow Revolution Bow requires minimal assembly. It is designed for immediate play after unpacking.

  1. Unpack the Bow: Carefully remove all components from the packaging. Ensure all arrows are accounted for.
  2. Inspect the Bow: Check the bowstring and the arrow loading mechanism for any damage or obstructions before first use.
Person holding the packaged Nerf Rebelle Arrow Revolution Bow

Image: A person holding the packaged Nerf Rebelle Arrow Revolution Bow, ready for unboxing.

Operating Instructions

Follow these steps to operate your Nerf Rebelle Arrow Revolution Bow:

  1. Load Arrows: Insert the foam arrows into the rotating quiver. Ensure they are seated correctly. The bow can hold multiple arrows for rapid firing.
  2. Prepare to Fire: Hold the bow firmly with one hand. With the other hand, pull the bowstring back until an arrow automatically drops into the firing position.
  3. Aim: Point the bow towards your target, ensuring no people or animals are in the line of fire.
  4. Fire: Release the bowstring to launch the arrow. The rotating quiver will automatically advance the next arrow when the string is pulled back again.
Close-up of a hand loading arrows into the rotating quiver of the Nerf Rebelle bow

Image: A close-up view of a hand loading foam arrows into the rotating quiver of the Nerf Rebelle Arrow Revolution Bow.

Close-up of the arrow loading mechanism on the Nerf Rebelle bow

Image: A detailed view of the arrow loading mechanism on the Nerf Rebelle Arrow Revolution Bow, showing how arrows are positioned for firing.

Girl firing the Nerf Rebelle Arrow Revolution Bow

Image: A girl demonstrating the firing action of the Nerf Rebelle Arrow Revolution Bow, with an arrow in flight.

Official Product Video:

Video: An official product overview demonstrating the features and operation of the Nerf Rebelle Secrets and Spies Arrow Revolution Bow.

Maintenance

  • Cleaning: Wipe the bow with a damp cloth to remove dirt and dust. Do not submerge in water.
  • Storage: Store the bow and arrows in a cool, dry place away from direct sunlight to prevent material degradation.
  • Inspection: Regularly inspect the bowstring and arrows for wear and tear. Replace damaged components immediately to ensure safe operation.

Troubleshooting

ProblemPossible CauseSolution
Arrows fall out of quiver easily.Bow not held level during loading/movement.Ensure the bow is held horizontally and steadily when loading arrows and moving.
Arrows do not fire or misfire.Arrow not properly seated in the firing mechanism or bowstring not pulled back fully.Ensure the arrow is fully inserted and the bowstring is pulled back until it clicks into place. Inspect for any obstructions.
Reduced firing distance.Worn bowstring or damaged arrows.Check the bowstring for fraying or looseness. Inspect arrows for bends or damage. Replace if necessary.

Specifications

  • Brand: Nerf
  • Model Number: B1696
  • Item Type Name: Arrow Revolution Bow
  • Material Type: Plastic
  • Color: Multicolor
  • Item Dimensions: 3.19 x 30 x 15 inches
  • Item Weight: 1.23 Kilograms
  • Manufacturer Minimum Age: 96.0 months (8 years)
  • Operation Mode: Automatic (arrow loading)
  • Assembly Required: No

Warranty and Support

This product is provided with No Warranty from the manufacturer. For any product-related inquiries or support, please contact the manufacturer, Hasbro, directly through their official customer service channels.

You can visit the official Nerf Store for more information: Nerf Official Store

Related Documents - B1696

Preview Nerf Hyper MACH-100 Blaster: Operating and Safety Instructions
Comprehensive guide for the Nerf Hyper MACH-100 blaster, detailing how to load, fire, clear jams, store the blaster, and important safety precautions. Includes battery information and product compatibility.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.