Oster 465-42 3-Speed Blender User Manual

1. Introduction

Thank you for choosing the Oster 465-42 3-Speed Blender. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the product.
• To protect against electrical shock, do not place cord, plug, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• Always operate blender with lid in place.
• When blending hot liquids, use caution as steam can cause burns.
• Do not use appliance for other than intended use.

3. Product Components and Overview

Familiarize yourself with the parts of your Oster 465-42 Blender:

• Blender Base: Houses the 400-watt motor and control knob. Features an all-metal drive system for durability.
• Glass Jar: 1.25-liter capacity, made of heat-resistant glass.
• Lid: Vinyl material, fits securely on the glass jar.
• Measuring Cap: Transparent plastic cap with 60 ml capacity, integrated into the lid for adding ingredients during blending.
• Ice Crusher Blade: Revolutionary blade designed for efficient ice crushing and blending.
• Small Mixing Cup: An additional cup for preparing smaller mixtures.
• Control Knob: Allows selection of 3 speeds and an OFF setting.

Figure 3.1: The Oster 465-42 Blender featuring its main glass jar, base with control knob, and an accompanying small measuring cup.

Figure 3.2: Side view of the Oster 465-42 Blender, highlighting the robust base and glass jar assembly.

Figure 3.3: Illustrative diagram showing the approximate dimensions of the Oster 465-42 Blender, indicating a height of 17 inches (43 cm).

4. Setup and Assembly

Before first use, wash all parts except the blender base in warm, soapy water. Rinse thoroughly and dry. The blender base can be wiped clean with a damp cloth.

1. Assemble the Blade: Place the Ice Crusher Blade assembly onto the bottom of the glass jar. Ensure it is seated correctly.
2. Secure the Base: Screw the jar base (which holds the blade) onto the bottom of the glass jar until it is tight.
3. Place Jar on Motor Base: Carefully place the assembled glass jar onto the motor base. Ensure it is securely seated and aligned with the all-metal drive system.
4. Attach Lid: Place the vinyl lid onto the glass jar. Insert the transparent measuring cap into the lid opening.
5. Connect Power: Plug the blender into a standard 120-volt electrical outlet.

Your blender is now ready for use.

5. Operating Instructions

Follow these steps for safe and effective blending:

1. Prepare Ingredients: Cut solid ingredients into small pieces (approximately 1-inch cubes) for optimal blending.
2. Add Ingredients: Place ingredients into the glass jar. For best results, add liquids first, then soft foods, then hard foods, and finally ice. Do not overfill the jar beyond the 1.25-liter mark.
3. Secure Lid: Always ensure the lid and measuring cap are securely in place before operating the blender.
4. Select Speed: Turn the control knob to your desired speed setting (1, 2, or 3).
   • Speed 1: For light mixing, stirring, and pureeing.
   • Speed 2: For medium blending, chopping, and mixing.
   • Speed 3: For heavy blending, crushing ice, and liquefying.
5. Blend: Allow the blender to run until desired consistency is achieved. For continuous operation, do not run for more than 3 minutes at a time. Allow the motor to rest for 10 minutes between cycles.
6. Add Ingredients During Blending: If necessary, remove the measuring cap from the lid and add ingredients through the opening while the blender is running. Replace the cap immediately.
7. Stop Blending: Turn the control knob to the "OFF" position.
8. Unplug: Always unplug the blender from the electrical outlet after use.

Note: The small mixing cup can be used for preparing smaller quantities of ingredients, following similar blending principles.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your blender.

6.1 Quick Cleaning

1. After use, rinse the glass jar, blade assembly, lid, and measuring cap.
2. Fill the glass jar halfway with warm water and add a drop of dish soap.
3. Place the lid securely on the jar and place the jar on the motor base.
4. Run the blender on Speed 1 for 15-30 seconds.
5. Empty the jar and rinse thoroughly.

6.2 Deep Cleaning

1. Unplug the blender.
2. Disassemble the glass jar, blade assembly, lid, and measuring cap.
3. Wash all removable parts in warm, soapy water. Use a brush to clean around the blades carefully.
4. Rinse all parts thoroughly and allow them to air dry completely before reassembling or storing.
5. Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.

Caution: Blades are sharp. Handle with extreme care during cleaning.

7. Troubleshooting

If you encounter issues with your blender, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Product Specifications

9. Warranty and Support

Oster products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Oster website. Keep your purchase receipt as proof of purchase.

For technical support, service, or replacement parts, please contact Oster customer service. Contact information can typically be found on the product packaging or the official Oster website.

Online Resources: www.oster.com