Allen 102DN-R

Allen Sports Deluxe 2-Bike Trunk Mount Rack Instruction Manual

Model: 102DN-R

Brand: Allen

1. Introduction

The Allen Sports Deluxe 2-Bike Trunk Mount Rack, Model 102DN-R, is designed for easy and secure transportation of up to two bicycles on the trunk of your vehicle. This rack features a padded lower frame to protect your bicycles and vehicle, individual tie-downs for secure bike placement, and side straps for enhanced lateral stability. It comes fully assembled for quick setup.

Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2. What's in the Box

  • Bicycle carrier

3. Setup Instructions

The Allen Sports Deluxe 2-Bike Trunk Mount Rack is designed for quick and easy installation. It comes fully assembled and can be set up in seconds.

3.1. Attaching the Rack to Your Vehicle

  1. Position the rack on the trunk of your vehicle. Ensure the padded lower frame rests securely against the vehicle's surface to prevent scratches.
  2. Secure the top straps over the top edge of the trunk. The top hooks are generally larger/wider.
  3. Attach the side straps to the sides of the trunk. These straps provide increased lateral stability.
  4. Secure the bottom strap. For many vehicles, this involves opening the trunk slightly, placing the hook inside, and then closing the trunk to secure the hook. Tighten all straps firmly.
Allen Sports Deluxe 2-Bike Trunk Mount Rack installed on a car trunk
The bike rack securely mounted on a car trunk, showing the overall setup.
Close-up of the top strap and padded support on the car trunk
Detail of the top strap and the padded support resting on the vehicle's trunk.
Close-up of the side strap attachment point on the car
View of a side strap attached to the vehicle, providing lateral stability.
Close-up of the bottom hook attachment point on the car
Detail of the bottom hook securing the rack to the lower edge of the trunk.

3.2. Vehicle Compatibility

This rack fits a wide range of cars including hatchbacks, squarebacks/SUVs, and sedans. Always verify compatibility with your specific vehicle model before use.

Diagram showing the bike rack installed on different types of vehicles: hatchback, SUV, and sedan
Illustrates how the rack can be installed on various vehicle types.

3.3. Secure Strap Placement

Ensure all straps are correctly positioned and tightened for maximum security. The diagram below shows the recommended strap placement.

Diagram illustrating the secure placement of the five straps on a car trunk
Diagram showing the five key strap attachment points for secure installation.

4. Operating Instructions

This rack is designed to carry up to two bicycles with a maximum capacity of 70 lbs. The 12-inch long carry arms easily accommodate most bicycle frames.

4.1. Loading Bicycles

  1. Place the bicycle frame onto the rack's carry arms.
  2. Utilize the individual tie-downs to secure the bicycle frame to the rack. These tie-downs are designed to protect your bicycles from scratching and provide a snug fit.
  3. Ensure both bicycles are properly spaced and secured to prevent contact during transit.
Close-up of the individual tie-down cradles on the bike rack
Individual tie-down cradles designed to secure and protect bicycle frames.
Close-up of a red knob on the tie-down cradle, indicating a release or adjustment mechanism
Red knob on the tie-down cradle for easy adjustment and release.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your bike rack.

  • Cleaning: Clean the rack with mild soap and water after each use, especially if exposed to dirt, salt, or harsh weather conditions. Rinse thoroughly and dry.
  • Inspection: Periodically inspect all straps, buckles, and padded areas for signs of wear, fraying, or damage. Check all bolts and connections to ensure they are tight.
  • Storage: When not in use, store the rack in a dry, cool place away from direct sunlight. The rack can be folded for compact storage in your vehicle's trunk.
Allen Sports Deluxe 2-Bike Trunk Mount Rack folded and stored in a car trunk
The bike rack folded for compact storage in a vehicle's trunk.

6. Troubleshooting

Here are some common issues and solutions for your bike rack:

  • Bikes Shifting: Ensure all tie-downs are individually secured and tightened. For bikes with non-standard frames (e.g., some women's bikes), consider using an adapter bar to provide a level top tube for mounting. Always secure the front wheel with a bungee cord or strap to prevent it from swiveling and hitting the vehicle.
  • Rack Not Secure: Double-check that all six straps (two top, two side, two bottom) are correctly hooked and pulled taut. The side straps should ideally hook under the lights for a more secure fit.
  • Paint Scratches: While the rack has padded contact points, it is recommended to use electrical tape around the hooks or apply a protective film to your vehicle's paint where the rack makes contact, especially for new cars.
  • Trunk Access: Install the rack after loading items into your trunk, as the top straps may prevent the trunk from opening fully once the rack is installed.
  • Multiple Bikes: When carrying two mountain bikes, space can be tight. Consider covering forks and brake levers with a microfiber cloth and Velcro straps to prevent scratching.

7. Specifications

BrandAllen
Model102DN-R
ColorRed/ Black
Item Dimensions (L x W x H)23.03 x 13.58 x 3.94 inches
Load Capacity70 Pounds
Mounting TypeStrap
Item Weight7.48 pounds
Country of OriginChina
Special FeaturesPadded lower frame, Individual tie down cradle

8. Warranty & Support

Allen Sports offers a lifetime warranty on this product, covering defects in material and workmanship over the lifetime of the original purchaser. The warranty does not cover normal wear and tear or damage which occurs as a result of misuse or improper installation.

For detailed instructions and support, please refer to the official User Guide (PDF) available for download: User Guide (PDF).

This product is available in continental USA only.

Related Documents - 102DN-R

Preview Allen SB-05 Smart Suction™ Go 1-Bike Rack User Manual
Comprehensive user manual for the Allen SB-05 Smart Suction™ Go 1-bike rack, covering installation, usage, pairing with the Allen Sports app, troubleshooting, and maintenance. Learn how to safely transport your bicycle.
Preview Allen 3-Bike Trunk Rack Safety Warnings and Mounting Guide
Essential safety warnings and mounting instructions for Allen 3-Bike Trunk Racks (Models: 103DN, 103DB, QS3, S103). Learn how to safely attach and use your bicycle carrier.
Preview Allen SB-01 Smart Suction 1-Bike Rack: Owner's Manual and Installation Guide
Comprehensive owner's manual and installation guide for the Allen SB-01 Smart Suction 1-Bike Rack. Learn how to assemble, install, adjust, use, and maintain your bike rack for secure bicycle transport.
Preview Allen SB-05 Smart Suction Go 1-Bike Rack: Owner's Manual & Setup Guide
Comprehensive owner's manual and setup guide for the Allen SB-05 Smart Suction Go 1-Bike Rack. Learn how to install, use, and maintain your bike rack for secure transport.
Preview Allen SB-05 Smart Suction™ Go 1-Bike Rack User Manual
Comprehensive user manual for the Allen SB-05 Smart Suction™ Go 1-Bike Rack. Covers product registration, safety warnings, parts list, installation, app integration, troubleshooting, and maintenance for secure bicycle transport.
Preview Allen SB-05 Smart Suction™ Go 1-Fahrradträger Bedienungsanleitung
Diese Bedienungsanleitung von Allen Sports USA bietet detaillierte Anweisungen zur Installation, Verwendung und Wartung des SB-05 Smart Suction™ Go 1-Fahrradträgers. Erfahren Sie, wie Sie Ihr Fahrrad sicher auf Ihrem Fahrzeug montieren und die Funktionen des Trägers, einschließlich der App-Konnektivität, optimal nutzen.