Introduction
Thank you for choosing the Roca Henares Porcelain Washbasin. This manual provides essential information for the safe installation, proper use, and effective maintenance of your new washbasin. Please read this manual thoroughly before installation and retain it for future reference.
Image: Roca brand logo, indicating the manufacturer of the Henares washbasin.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Professional Installation Recommended: Installation of plumbing fixtures should ideally be performed by a qualified professional to ensure correct fitting and prevent leaks.
- Handle with Care: Porcelain is a fragile material. Handle the washbasin carefully to avoid chipping or breaking.
- Secure Mounting: Ensure the wall structure is adequate to support the weight of the washbasin when filled with water. Use appropriate mounting hardware for your wall type.
- Water Supply: Turn off the main water supply before beginning any installation or maintenance work.
- Drainage: Ensure proper drainage connections to prevent water overflow and damage.
Package Contents
Verify that all components are present before beginning installation:
- Roca Henares Porcelain Washbasin (1 unit)
- Mounting Hardware (screws, anchors, brackets - may vary by region/supplier)
- Installation Template (if included)
Note: Faucet, drain assembly (pop-up type recommended), and P-trap are typically sold separately.
Setup and Installation
The Roca Henares Washbasin is designed for wall-mount installation. Follow these general steps, referring to any specific instructions provided with your mounting hardware.
Required Tools (Not Included):
- Drill
- Level
- Measuring Tape
- Pencil
- Adjustable Wrench
- Screwdriver
- Sealant (silicone caulk)
Installation Steps:
- Prepare the Area: Turn off the water supply. Clear the installation area.
- Mark Mounting Points: Use the provided template or measure carefully to mark the drilling points on the wall for the mounting brackets. Ensure the marks are level.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Attach Brackets: Securely fasten the mounting brackets to the wall.
- Position Washbasin: Carefully lift the washbasin and place it onto the mounting brackets. Ensure it sits securely and level.
- Connect Faucet and Drain: Install the faucet according to its manufacturer's instructions. Connect the pop-up drain assembly and P-trap to the washbasin, ensuring all connections are watertight. Apply plumber's putty or sealant as required.
- Seal Edges: Apply a bead of silicone sealant along the back edge of the washbasin where it meets the wall to prevent water infiltration.
- Test for Leaks: Turn on the water supply and check all connections for leaks.
Image: Diagram showing the dimensions of the Roca Henares Washbasin: 60 cm (length), 39 cm (width), and 36 cm (height).
Operating Instructions
The Roca Henares Washbasin is designed for standard bathroom use. To operate:
- Water Flow: Use the faucet handles (not included) to control the water temperature and flow.
- Drainage: The washbasin features a pop-up drain (drain assembly sold separately). Use the lever or push-button mechanism on your faucet or drain assembly to open and close the drain.
- Avoid Overfilling: Do not overfill the washbasin to prevent water spillage.
Maintenance and Cleaning
Regular cleaning will maintain the appearance and hygiene of your washbasin.
- Daily Cleaning: Wipe the washbasin with a soft cloth and mild soap or a non-abrasive bathroom cleaner after each use to prevent water spots and soap scum buildup.
- Deep Cleaning: For more thorough cleaning, use a porcelain-safe cleaner. Always rinse thoroughly with clean water and dry with a soft cloth.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids or alkalis) as these can damage the porcelain finish.
- Drain Maintenance: Periodically remove and clean the pop-up drain stopper to clear any hair or debris that may accumulate.
- Check for Leaks: Regularly inspect the plumbing connections under the washbasin for any signs of leaks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose connections, worn seals, damaged P-trap. | Tighten connections. Replace worn seals or damaged components. Ensure proper sealant application. |
| Slow Drainage | Clogged drain (hair, soap scum). | Remove and clean the pop-up stopper. Use a drain cleaner safe for plumbing, or a plumbing snake. |
| Washbasin is not level | Improper installation of mounting brackets. | Re-adjust mounting brackets. Ensure wall is plumb and level before installation. |
| Stains on Porcelain | Hard water deposits, rust, or improper cleaning agents. | Use a non-abrasive porcelain cleaner. For hard water, use a vinegar solution (diluted) and rinse thoroughly. Avoid metal brushes. |
Specifications
- Model: Henares A368951001
- Brand: Roca
- Material: Porcelain
- Color: White
- Dimensions (L x W x H): 600 mm x 390 mm x 360 mm (23.6 x 15.4 x 14.2 inches)
- Weight: 23.8 kg (52.5 lbs)
- Mounting Type: Wall Mount
- Drain Type: Pop-Up (drain assembly sold separately)
- Style: Classic
- Finish: Polished
- GTIN (EAN): 08414329229233
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Roca website. Keep your proof of purchase for any warranty claims.
Roca Official Website: www.roca.com