1. Introduction
This manual provides essential information for the safe and effective use of your Dremel EZ725 70-Piece All-Purpose Rotary Tool Accessory Set. This kit is designed to enhance the versatility of your Dremel rotary tool, offering a wide range of accessories for various tasks such as cutting, polishing, cleaning, and sanding.
The set features the innovative EZ Lock™ and EZ Drum™ systems, engineered for faster accessory changes compared to standard mandrels, allowing you to transition between tasks with greater efficiency. All Dremel rotary accessories in this kit are compatible with Dremel corded and cordless rotary tools and feature a standard 1/8-inch shank.
2. Safety Information
Always prioritize safety when operating rotary tools and using accessories. Failure to follow safety guidelines can result in injury or damage to property. Refer to your Dremel rotary tool's instruction manual for comprehensive safety instructions.
- Eye Protection: Always wear approved safety glasses or goggles to protect against flying debris.
- Respiratory Protection: Use a dust mask, especially when sanding or cutting materials that produce fine particles.
- Work Area: Ensure your work area is well-lit and clear of obstructions. Secure your workpiece firmly.
- Accessory Compatibility: Only use accessories that are compatible with your specific Dremel rotary tool model and application.
- Accessory Inspection: Before each use, inspect accessories for damage, cracks, or wear. Do not use damaged accessories.
- Speed Settings: Operate the rotary tool at appropriate speeds for the accessory and material. Refer to your tool's manual for guidance.
- Pressure: Apply light, consistent pressure. Excessive force can damage the accessory, tool, or workpiece.
- Unplug Tool: Always unplug or remove the battery from your rotary tool before changing accessories or performing maintenance.
3. Package Contents
The Dremel EZ725 kit includes 70 genuine Dremel accessories and a reusable storage bin with lift-out trays for organized storage. The accessories are designed for a variety of tasks, including cutting, polishing, sanding, and cleaning.
Image: Dremel EZ725 70-Piece Accessory Kit in its storage case, showing various accessories organized within.
Image: Detailed view of Dremel EZ725 accessories, showcasing sanding bands, various cutting wheels, and mandrels.
Included Accessories:
- Cutting Accessories:
- 1x EZ544 EZ Lock 1-1/2" Carbide Cutting Wheel
- 1x EZ545 EZ Lock 1-1/2" Diamond Cutting Wheel
- 1x EZ476 EZ Lock 1-1/2" Plastic Cut-Off Wheel
- 4x EZ456 EZ Lock 1-1/2" Metal Cut-Off Wheels
- 3x EZ409 EZ Lock 1-1/2" Thin Cut Wheels
- Sanding Accessories:
- 6x EZ411SA EZ Lock 1-1/4" Sanding Discs
- 20x 432 1/2" Sanding Bands
- 6x EZ413SA EZ Lock 1-1/4" Sanding Discs
- 20x 408 1/2" Sanding Bands
- Polishing & Cleaning Accessories:
- 1x 511E EZ Lock Finishing Abrasive Buff
- 1x 512E EZ Lock Finishing Abrasive Buff
- Mandrels:
- 1x EZ402 EZ Lock Mandrel
- 1x EZ407 EZ Drum Mandrel
4. Setup and Accessory Changes
The Dremel EZ725 kit features the EZ Lock and EZ Drum systems for quick and easy accessory changes. Always ensure your rotary tool is unplugged or its battery is removed before changing any accessories.
4.1. EZ Lock System
The EZ Lock system allows for rapid changes of cutting, grinding, sanding, and polishing wheels without the need for a wrench or screw. This system is up to 6 times faster than traditional mandrels.
Image: Step-by-step guide for changing EZ Lock accessories, illustrating the pull down, insert and twist, and release actions.
- Pull Down: Pull down the spring-loaded collar on the EZ Lock mandrel.
- Insert & Twist: Insert the accessory into the mandrel and twist it until it locks into place.
- Release: Release the collar. The accessory should be securely fastened. Gently pull on the accessory to confirm it is locked before use.
4.2. EZ Drum System
The EZ Drum system simplifies the process of changing sanding bands, making it up to 5 times faster than standard drum mandrels.
Image: Step-by-step guide for changing EZ Drum sanding bands, showing the pull, place, and secure actions.
- Pull: Pull up the top of the EZ Drum mandrel.
- Place: Slide the sanding band onto the drum.
- Secure: Push the top of the mandrel back down to secure the sanding band. Ensure the band is snug before operation.
5. Operating: Accessory Usage Guide
Selecting the correct accessory for your task is crucial for optimal results and accessory longevity. The Dremel EZ725 kit provides a variety of accessories for different applications.
Image: A chart illustrating various Dremel accessories and their corresponding color-coded applications, including cutting, sanding, polishing, and grinding.
5.1. Cutting
Use cutting wheels for precise cuts in various materials. Always ensure the workpiece is stable and apply light, consistent pressure.
- EZ456 Metal Cut-Off Wheels: Ideal for cutting through metal, including hardened steel. These are reinforced for extended life.
- EZ409 Thin Cut Wheels: Suitable for delicate cuts in softer materials.
- EZ476 Plastic Cut-Off Wheel: Specifically designed for cutting plastic materials.
- EZ544 Carbide Cutting Wheel: For general-purpose cutting in various materials.
- EZ545 Diamond Cutting Wheel: Best for cutting hard materials like ceramic tile, stone, and glass.
Image: A Dremel rotary tool equipped with a cutting wheel, actively cutting a metal pipe, generating sparks.
5.2. Sanding
Sanding accessories are used for shaping, smoothing, and removing material from various surfaces. Match the grit of the sanding band or disc to the desired finish.
- Sanding Bands (408, 432): Used with the EZ Drum mandrel for coarse to medium sanding on wood, plastic, and soft metals.
- EZ411SA & EZ413SA Sanding Discs: For fine sanding and finishing tasks.
Image: A Dremel rotary tool with a sanding disc attached, being used to sand a surface, demonstrating its application.
5.3. Polishing & Cleaning
Finishing abrasive buffs are used for light material removal, blending, and surface preparation.
- 511E & 512E EZ Lock Finishing Abrasive Buffs: Ideal for light deburring, cleaning, and surface conditioning on various materials.
6. Maintenance
Proper maintenance of your Dremel accessories ensures their longevity and consistent performance.
- Cleaning: After each use, clean accessories to remove debris and residue. A soft brush or cloth can be used.
- Inspection: Regularly inspect all accessories for signs of wear, damage, or dullness. Replace worn-out accessories promptly to maintain performance and safety.
- Storage: Store accessories in the provided reusable storage bin. The lift-out trays help keep accessories organized and protected from damage. Store in a dry environment.
7. Troubleshooting
If you encounter issues while using your Dremel accessories, consider the following common solutions:
- Accessory Not Performing:
- Ensure the correct accessory is selected for the material and task.
- Check if the accessory is worn or dull and replace if necessary.
- Verify the rotary tool speed setting is appropriate for the accessory and material.
- Avoid applying excessive pressure, which can reduce efficiency and damage the accessory.
- Accessory Breaking or Wobbling:
- Ensure the accessory is properly installed and securely locked into the mandrel.
- Check the mandrel for damage or bending.
- Confirm the accessory is not overloaded or subjected to side pressure beyond its design.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Dremel |
| Model Number | EZ725 |
| Item Package Quantity | 70-Pieces |
| Recommended Uses | Cutting, Polishing, Sanding, Cleaning |
| Accessory Systems | EZ Lock, EZ Drum |
| Shank Size | 1/8 inch (standard) |
| Storage | Reusable storage bin with lift-out trays |
| Material | Plastic (storage bin), various materials for accessories |
| Item Weight | 0.8 ounces (accessories only) |
| Product Dimensions | 7.5 x 9.1 x 2 inches (packaging) |
| UPC | 080596039103 |
9. Warranty and Support
The Dremel EZ725 70-Piece All-Purpose Rotary Tool Accessory Set comes with a Limited 90 Days Warranty. This warranty covers defects in material and workmanship under normal use.
For warranty claims, technical assistance, or further product information, please refer to the official Dremel website or contact Dremel customer support directly. Keep your proof of purchase for warranty validation.
For additional resources and product registration, visit the official Dremel website: www.dremel.com
