Toro UltraPlus 51621 Leaf Blower Vacuum Instruction Manual

Introduction

The Toro UltraPlus 51621 is a versatile 3-in-1 electric tool designed for yard maintenance, functioning as a powerful blower, a high-speed vacuum, and a leaf shredder. It features a variable-speed motor, a metal impeller for efficient mulching, and various attachments to assist with different tasks.

This manual provides instructions for the safe and effective operation and maintenance of your Toro UltraPlus 51621. Please read it thoroughly before use.

Image: Fully assembled Toro UltraPlus 51621 Leaf Blower Vacuum in red.

Safety Information

WARNING: Always wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves, when operating this tool.

• Ensure the power cord is in good condition and properly connected to a suitable extension cord. Use a 14-gauge extension cord for optimal performance and safety, especially for runs up to 100 feet.
• Keep hands, feet, and clothing away from moving parts and openings.
• Do not operate in wet conditions or allow the tool to become submerged.
• Disconnect power before cleaning, performing maintenance, or clearing clogs.
• Do not use the vacuum to pick up dust or fine particles, as the bag is designed for leaf particles and requires airflow.

Setup and Assembly

The Toro UltraPlus 51621 comes with several components for its various functions. Assembly is required to switch between blower and vacuum modes.

Image: All components of the Toro UltraPlus 51621 Leaf Blower Vacuum.

Blower Mode Assembly:

1. Attach the main blower tube to the motor housing. Ensure it clicks securely into place.
2. For specific tasks, attach the power insert for wet leaves, the concentrator nozzle for corners and crevices, or the oscillating nozzle for wider blowing paths.

Image: Hand attaching the blower tube to the motor unit.

Vacuum Mode Assembly:

1. Ensure the blower tube is removed.
2. Attach the vacuum tube to the intake opening of the motor housing.
3. Connect the bottom-zip vacuum bag to the discharge opening. The bag should fit tightly to ensure proper suction.
4. Adjust the shoulder strap on the vacuum bag for comfortable use.

Image: Hand attaching the vacuum tube to the motor unit.

Image: Hand attaching the vacuum bag to the discharge opening.

Cord Management:

The unit includes a cord storage hook to help manage the extension cord and prevent accidental disconnection during operation. Wrap the extension cord around the hook to secure the connection.

Image: The cord storage hook on the blower unit, securing an extension cord.

Operating Instructions

The Toro UltraPlus 51621 features variable speed control for precise operation in both blower and vacuum modes.

Starting and Stopping:

1. Connect the tool to a suitable power outlet using a heavy-duty outdoor extension cord.
2. To start, press the power switch.
3. To stop, release the power switch.

Variable Speed Control:

Adjust the dial on the top of the unit to increase or decrease the airflow speed. Lower speeds are suitable for delicate areas or light debris, while higher speeds provide maximum power for stubborn leaves or vacuuming.

Blowing Operation:

Use the blower mode to clear leaves and debris from hard surfaces, lawns, and garden beds. The oscillating nozzle can be used to sweep air back and forth automatically, creating a wider clearing path without constant wrist movement.

Image: A person using the Toro UltraPlus 51621 in blower mode to clear leaves from a pathway.

Vacuum and Mulching Operation:

In vacuum mode, the tool collects leaves and debris into the vacuum bag while simultaneously shredding them with the metal impeller and Shredz-All shred ring. This reduces the volume of debris, making disposal easier.

• For best results, vacuum dry leaves. Damp leaves may be heavier and more prone to clogging.
• Move the vacuum tube slowly and steadily over the debris. Avoid attempting to vacuum large, thick sticks or excessive amounts of wet material at once to prevent clogging.
• The Shredz-All shred ring works with the metal impeller to reduce mulched debris to less than 1/2 inch.

Image: Close-up view of the metal impeller inside the Toro UltraPlus 51621.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Toro UltraPlus 51621.

• Emptying the Vacuum Bag: The vacuum bag features a bottom-zip design for easy emptying. Unzip the bottom to release mulched debris.


Image: The vacuum bag for the Toro UltraPlus 51621, showing the bottom zipper for easy emptying.

• Cleaning: After each use, disconnect the power and clean the exterior of the unit with a damp cloth. Remove any debris from the intake and discharge openings.
• Storage: Store the unit and its attachments in a dry, protected area. The vacuum bag can be hung for convenient storage of all components.


Image: A person hanging the vacuum bag on a wall hook for storage.

Troubleshooting

Specifications

• Brand: Toro
• Model Number: 51621
• Power Source: Corded Electric
• Voltage: 120 volts
• Wattage: 1000 watts
• Maximum Air Speed: Up to 250 mph
• Air Flow Capacity (Blower Mode): 340 CFM
• Air Flow Capacity (Vacuum Mode): 405 CFM
• Noise Level: 60 dB
• Item Weight: 8.9 pounds
• Material Type: Metal (Impeller)
• Special Features: 3-in-1 (Blower, Vacuum, Shredder), Metal Impeller, Shredz-All Shred Ring, Oscillating Nozzle

Warranty and Support

This Toro UltraPlus 51621 is covered by a 2-year full coverage warranty. For warranty details or technical support, please refer to the documentation included with your product or visit the official Toro website.

For additional assistance, you may contact Toro customer service.