Samsung BD-J5700 Blu-ray Player User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Samsung BD-J5700 Blu-ray Player. Please read this manual thoroughly before using your device to ensure proper functionality and to maximize your viewing experience. Keep this manual for future reference.

2. Package Contents

Verify that all items are present in the box:

• Samsung BD-J5700 Smart Wi-Fi Blu-ray Player
• Remote Control
• Power Cord
• AA Batteries (2) for Remote Control
• User Manual (this document)

Note: HDMI cable is not included and must be purchased separately.

3. Product Overview

Familiarize yourself with the components and controls of your Blu-ray player.

Figure 1: Front-angled view of the Samsung BD-J5700 Blu-ray Player. The player features a textured black finish with the Samsung logo on the left front. The disc tray is visible on the left, and on the right side of the front panel are the USB port, disc eject button, and power button.

Front Panel

• Disc Tray: Insert Blu-ray discs, DVDs, or CDs.
• USB Port: Connect USB storage devices for media playback.
• Eject Button (⏏): Opens and closes the disc tray.
• Power Button (⏻): Turns the player on or off.

Rear Panel (Typical Connections)

• HDMI Output: Connects to your TV or AV receiver for audio and video.
• Ethernet Port (LAN): Connects to your network router via an Ethernet cable for wired internet access.
• Power Input: Connects the power cord.

4. Setup

4.1 Connecting to Your TV

1. Ensure your TV and Blu-ray player are turned off.
2. Connect one end of an HDMI cable (not included) to the HDMI OUT port on the back of the Blu-ray player.
3. Connect the other end of the HDMI cable to an available HDMI IN port on your TV. Note the HDMI input number (e.g., HDMI 1, HDMI 2).
4. Plug the power cord into the Blu-ray player's power input, then into a wall outlet.

4.2 Connecting to the Network

The BD-J5700 supports both wired (Ethernet) and wireless (Wi-Fi) network connections for accessing online content and firmware updates.

Wired Connection (Ethernet)

1. Connect an Ethernet cable (not included) from your network router to the LAN port on the back of the Blu-ray player.
2. The player will typically detect the wired connection automatically.

Wireless Connection (Wi-Fi)

1. Turn on your TV and the Blu-ray player.
2. Select the correct HDMI input on your TV.
3. Navigate to the player's Settings menu.
4. Select Network, then Network Settings.
5. Choose Wireless and select your Wi-Fi network from the list.
6. Enter your Wi-Fi password (security key) using the on-screen keyboard.
7. Confirm the connection.

Note: If you experience poor Wi-Fi connectivity, consider using a wired Ethernet connection for more stable performance.

4.3 Initial Setup Wizard

Upon first power-on, the player will guide you through an initial setup process. Follow the on-screen prompts to:

• Select your preferred language.
• Configure network settings (if not already done).
• Set up time and date.
• Agree to terms and conditions for smart features.

Important: After completing the initial setup, it is recommended to power cycle the device (turn it off and then on again) to ensure all settings are applied correctly.

5. Operating Instructions

5.1 Playing Discs

1. Press the Power button (⏻) on the player or remote control to turn on the device.
2. Press the Eject button (⏏) to open the disc tray.
3. Place a Blu-ray disc, DVD, or CD onto the disc tray with the label side facing up.
4. Press the Eject button (⏏) again to close the tray.
5. The player will automatically begin playback or display the disc menu. Use the remote control to navigate.

5.2 Using Smart Features and Apps

With a network connection, your BD-J5700 can access various online streaming services and apps.

• From the Home screen, navigate to the Smart Hub or Apps section.
• Select the desired application (e.g., Netflix, YouTube).
• Log in with your account credentials if required.

5.3 USB Media Playback

You can play media files (photos, music, videos) stored on a USB device.

1. Insert a USB storage device into the USB port on the front panel.
2. The player should automatically detect the device and prompt you to select the media type (Video, Photo, Music).
3. Navigate through your files using the remote control and select the desired content to play.

6. Maintenance

6.1 Cleaning the Player

• Before cleaning, disconnect the power cord from the wall outlet.
• Use a soft, dry cloth to wipe the exterior surfaces of the player. Do not use liquid cleaners or abrasive cloths.
• For stubborn marks, lightly dampen the cloth with water and wipe gently, then dry immediately with a clean, dry cloth.

6.2 Disc Care

• Handle discs by their edges to avoid fingerprints.
• Clean discs with a soft, lint-free cloth, wiping from the center outwards.
• Do not use solvents or abrasive cleaners on discs.

7. Troubleshooting

If you encounter issues with your Blu-ray player, refer to the following common problems and solutions:

• No Power:
  • Ensure the power cord is securely connected to both the player and a working wall outlet.
  • Verify the wall outlet is supplying power.
• No Picture or Sound:
  • Check that the HDMI cable is securely connected to both the player and the TV.
  • Ensure your TV is set to the correct HDMI input source.
  • Confirm that the TV's volume is not muted or set too low.
• Disc Does Not Play:
  • Check if the disc is inserted correctly with the label side up.
  • Clean the disc for any smudges or scratches.
  • Ensure the disc format is supported by the player (Blu-ray, DVD, CD).
• Wi-Fi Connection Issues:
  • Verify your Wi-Fi network is active and within range.
  • Re-enter your Wi-Fi password in the network settings.
  • Consider using a wired Ethernet connection for better stability if Wi-Fi signal is weak.
  • Restart your Wi-Fi router and the Blu-ray player.
• Slow Response / Player Freezes:
  • Perform a power cycle: unplug the player from the power outlet for a few minutes, then plug it back in.
  • Check for available firmware updates in the settings menu.
• Remote Control Not Working:
  • Replace the batteries in the remote control.
  • Ensure there are no obstructions between the remote and the player's front panel.
• HDMI-CEC (Anynet+) Conflicts:
  • If the player turns on or off unexpectedly with your TV, try disabling the HDMI-CEC function (Samsung's Anynet+) in the player's settings menu.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Samsung support website. Keep your proof of purchase for warranty claims.

For technical assistance, troubleshooting guides, or to contact customer support, please visit samsung.com/us/support.

Legal Disclaimer

This product is subject to a 15-day return policy. All returns are accepted, but the customer is responsible for shipping costs. This disclaimer does not affect your statutory rights.