Product Overview
The JBL GO is a compact and portable wireless Bluetooth speaker designed for on-the-go audio. It features a built-in strap-hook for easy portability and a speakerphone with noise and echo cancellation for clear calls. The device offers wireless Bluetooth streaming and can also connect via an audio cable.
Key features include:
- Wireless Bluetooth streaming for audio playback from compatible devices.
- Rechargeable battery providing up to five hours of playtime.
- Integrated speakerphone with noise and echo cancellation for hands-free calls.
- Built-in strap-hook for convenient carrying.
- Audio cable input for wired connections.
Figure 1: Front view of the JBL GO Portable Bluetooth Speaker, showcasing its compact design and JBL logo on the speaker grille.
Figure 2: Angled view of the JBL GO speaker, highlighting the integrated strap-hook on the side for portability.
Setup
1. Charging the Battery
Before initial use, fully charge the JBL GO speaker. The device is powered by a rechargeable Lithium Polymer battery.
- Locate the micro USB charging port on the side of the speaker.
- Connect the provided charging cable to the speaker's micro USB port and the other end to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. A full charge typically takes approximately 1.5 hours.
- Once fully charged, the indicator light may change or turn off, depending on the model. Disconnect the charging cable.
Figure 3: Side view of the JBL GO speaker, highlighting the micro USB charging port and auxiliary input.
2. Powering On and Bluetooth Pairing
To begin using your JBL GO speaker, follow these steps to power it on and pair it with a Bluetooth-enabled device.
- Press and hold the Power button located on the top panel of the speaker until the power indicator light illuminates.
- Upon powering on, the speaker will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth indicator light.
- On your smartphone, tablet, or other Bluetooth device, navigate to the Bluetooth settings.
- Select "JBL GO" from the list of available devices.
- Once successfully paired, the Bluetooth indicator light on the speaker will become solid, and you will hear an audible confirmation tone.
- The speaker has a Bluetooth range of up to 10 meters (33 feet). Ensure your device is within this range for optimal connection.
Figure 4: Top view of the JBL GO speaker, showing the power, Bluetooth, volume, and call control buttons.
Operating Instructions
1. Audio Playback
- Bluetooth Streaming: After successful pairing, audio from your connected device will play through the JBL GO speaker. Control playback (play/pause, skip tracks) directly from your source device.
- Auxiliary Input: For devices without Bluetooth, connect an audio cable (3.5mm jack, not included) from your device's headphone output to the speaker's auxiliary input port. The speaker will automatically switch to auxiliary mode when a cable is detected.
2. Volume Control
Adjust the volume using the dedicated volume buttons (- and +) located on the top panel of the speaker. You can also control the volume from your connected source device.
3. Speakerphone Functionality
The JBL GO features a built-in microphone with noise and echo cancellation, allowing for clear hands-free calls.
- Answering a Call: When a call comes in, press the Phone button (call icon) on the top panel once to answer.
- Ending a Call: During a call, press the Phone button once to end the call.
- Rejecting a Call: Press and hold the Phone button for approximately 2 seconds to reject an incoming call.
Maintenance
1. Cleaning
To maintain the appearance and functionality of your JBL GO speaker:
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, benzene, or other volatile liquids, as they may damage the finish or internal components.
- Ensure all ports are dry before charging or connecting cables.
2. Battery Care
The JBL GO uses a Lithium Polymer battery. Follow these guidelines for optimal battery life:
- Avoid fully discharging the battery frequently.
- Charge the speaker regularly, even if not in frequent use, to prevent deep discharge.
- Store the speaker in a cool, dry place when not in use for extended periods.
- Avoid exposing the speaker to extreme temperatures (hot or cold).
3. Water Resistance
The JBL GO speaker is designed to be waterproof. However, it is important to ensure the charging port and auxiliary input are completely dry before connecting any cables to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted. | Charge the speaker using the provided USB cable. |
| No sound | Volume is too low; Device not paired; Auxiliary cable not fully inserted. | Increase volume on speaker and source device; Re-pair Bluetooth device; Ensure auxiliary cable is securely connected. |
| Bluetooth connection unstable or drops | Device is out of range; Interference; Speaker needs reset. | Move device closer to speaker (within 10 meters); Avoid obstacles; Turn speaker off and on again. |
| Microphone not working during calls | Microphone is obstructed; Software issue on connected device. | Ensure microphone opening is clear; Check call settings on your phone. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | GO |
| Item Model Number | JBLGOBLK |
| Brand | JBL |
| Connectivity Technology | Bluetooth, Wireless |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 10 Meters |
| Speaker Type | Outdoor |
| Special Feature | Built In Microphone |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Polymer (included) |
| Charging Time | 1.5 Hours |
| Speaker Maximum Output Power | 3 Watts |
| Frequency Response | 20 KHz |
| Signal-to-Noise Ratio | 80 dB |
| Product Dimensions | 1.26"D x 3.27"W x 1.26"H |
| Item Weight | 4.7 Ounces |
| Material | Plastic or polymer |
| Color | BLACK |
| Water Resistance Level | Waterproof |
| Included Components | Rechargeable battery, built-in strap-hook, wireless Bluetooth streaming, speakerphone, audio cable input, noise-cancelling feature, charging cable. |
Warranty and Support
The JBL GO Portable Wireless Bluetooth Speaker comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official JBL support website.
For technical support, troubleshooting assistance, or service inquiries, please contact JBL customer support. You can typically find contact information (phone numbers, email, or online chat) on the official JBL website:
Please have your product model number (JBLGOBLK) and purchase date available when contacting support.
