1. Product Overview
The Ariens 08300014 Control Torsion Spring is a genuine Original Equipment Manufacturer (OEM) replacement part designed for specific Ariens and Gravely snow blowers and other equipment. This torsion spring plays a critical role in the control mechanisms of your machinery, ensuring proper function and operation by providing tension and return force to various levers and linkages.
Image 1: The Ariens 08300014 Control Torsion Spring, a black metal coiled spring with two straight arms extending from it.
2. Compatibility
This control torsion spring is compatible with a range of Ariens and Gravely equipment models. Please verify your equipment's model number against the list below to ensure proper fitment.
- Deluxe 28 Track
- Deluxe Platinum 24
- Deluxe Platinum 30
- Platinum 24 SHO
- Platinum SHO 24
- Platinum SHO 28 RapidTrak
- Platinum SHO 28 Track
- Platinum SHO 30
- Power-Brush 36
- Pro 26
- Pro 26 Track
- Pro 28
- Pro 28 Hydro
- Pro 28 Hydro RapidTrak
- Pro 28 Hydro Track
- Pro 32
- Pro 32 Hydro
- Pro 32 Hydro RapidTrak
- Pro 32 Hydro Track
- Pro 36
- Pro 36 Hydro
- ST1027LE
- ST1027LET
- ST1028DLE
- ST1130DLE
- ST1130LET
- ST11526DLE
- ST11528DLE
- ST11528DLET
- ST11528LE
- ST1328DLE
- ST1328LE
- ST1332DLE
- ST1332DLET
- ST1332LE
- ST1336DLE
- ST824LET
- ST8526DLE
- ST8526LE
- ST924DLE
- ST924LET
- ST926DLE
- ST926LE
- ST927LET
- ST9526DLE
- ST9526DLET
- WAW 1034
- WAW 34
- Gravely Pro-Stance 36
- Gravely WAW 1034
- Gravely WAW 34
3. Setup and Installation
Installation of the Ariens 08300014 Control Torsion Spring requires careful attention to detail and adherence to safety procedures. It is recommended to consult your equipment's specific service manual for detailed installation instructions or seek assistance from a qualified service technician. Always ensure the equipment is turned off and disconnected from any power source before beginning installation.
- Safety First: Disconnect the spark plug wire or remove the battery to prevent accidental starting.
- Access: Locate the area where the torsion spring needs to be replaced. This may involve removing covers or other components.
- Remove Old Spring: Carefully remove the old or broken torsion spring. Note its orientation and how it was attached.
- Install New Spring: Position the new Ariens 08300014 Control Torsion Spring in the exact manner of the original. Ensure it is securely seated and properly tensioned according to your equipment's manual.
- Reassemble: Reattach any components or covers that were removed.
- Test Functionality: Reconnect the power source and test the functionality of the control mechanism to ensure the spring operates correctly and smoothly.
Image 2: A close-up view of the coiled body of the torsion spring, highlighting its construction.
4. Operating Principles
The control torsion spring is an integral component of your equipment's control system. Its primary function is to store and release rotational energy, providing the necessary force to return levers, linkages, or other control mechanisms to their default position after being actuated. This ensures precise and responsive control over various functions, such as engaging drive systems, adjusting chute direction, or operating other implements.
5. Maintenance and Care
To ensure the longevity and proper function of your Ariens 08300014 Control Torsion Spring, regular inspection and care are recommended:
- Visual Inspection: Periodically inspect the spring for any signs of wear, such as stretching, cracks, deformation, or corrosion.
- Cleanliness: Keep the area around the spring clean and free of dirt, debris, and moisture, which can accelerate wear and corrosion.
- Lubrication: While torsion springs typically do not require lubrication, consult your equipment's service manual for any specific recommendations regarding the surrounding components.
- Replacement: If the spring appears damaged, broken, or shows significant signs of fatigue, it should be replaced promptly to maintain optimal equipment performance and safety.
6. Troubleshooting
If your equipment's control levers or mechanisms feel loose, unresponsive, or fail to return to their original position, the control torsion spring may be worn or broken. A visual inspection can often confirm if the spring is damaged. Common issues include:
- Loss of Tension: The spring no longer provides adequate return force.
- Breakage: The spring has fractured, rendering it ineffective.
- Deformation: The spring's coils are bent or stretched out of shape.
In such cases, replacement with a genuine OEM part like the Ariens 08300014 is the recommended solution to restore proper functionality and safety.
Image 3: The torsion spring viewed from an angle, showing the distinct bends at the ends of the arms.
7. Specifications
| Brand | Ariens |
| Part Number | 08300014 |
| Material | Metal |
| Color | Black |
| Item Weight | 1.6 ounces |
| Product Dimensions | 10 x 6 x 1 inches |
| Manufacturer | Ariens |
| ASIN | B00TDA99BE |
8. Warranty Information
As a genuine Ariens OEM part, the 08300014 Control Torsion Spring is typically covered by Ariens' standard warranty for replacement parts. Warranty terms and conditions can vary. Please refer to Ariens' official warranty policy documentation or contact their customer support directly for specific details regarding coverage, duration, and claims procedures.
9. Support and Contact
For further assistance, technical support, or to locate additional genuine Ariens parts, please visit the official Ariens website or contact their authorized service centers. You can also visit the Ariens Store on Amazon for product information and purchasing options.
