1. Product Overview
Toro HYPR-OIL 500 is a high-performance hydro oil specifically formulated for use in Toro landscape contractor mower hydraulic drive systems. This product is designed to provide consistent performance in extreme applications, offering excellent anti-wear protection, higher shear resistance, and greater thermal stability.
Image 1: Front view of the Toro 114-4713 Hypr-Oil 500 1 Quart bottle, showing the product label.
This product is an OEM Toro Part Number 114-4713, ensuring compatibility and optimal performance with specified Toro equipment.
2. Intended Use and Compatibility
Toro HYPR-OIL 500 is specifically formulated for Toro landscape contractor mower hydraulic drive systems, model year 2001 and later. It is crucial to note that this product may not meet the hydraulic system specifications for other products or brands.
Compatible Models:
- Toro Z-Master 3000 Series (48, 52, 60, 72 inch Turbo Force, MyRide 52, 60 inch Turbo Force)
- Toro Z-Master 5000 Series (48, 52, 60, 72 inch Turbo Force, MR 52, 60 inch Turbo Force, MyRide 52, 60 inch Turbo Force)
- Toro Z-Master 6000 Series (48, 52, 60, 72 inch Turbo Force, MyRide 60, 72 inch Turbo Force)
- Toro Z-Master 7500-G 96 inch Air Cool
- Toro Z-Master G3 Series (48, 52, 60, 72 inch Turbo Force)
Always refer to your original equipment owner's manual to verify the specific hydraulic oil compatibility requirements for your equipment.
3. Safety Information
Observe the following safety precautions when handling Toro HYPR-OIL 500:
- Skin Contact: Avoid prolonged skin contact. If contact occurs, wash the affected area with a mild soap containing lanolin or other emollients.
- Eye Contact: In case of eye contact, flush eyes with clear water for at least 15 minutes. If irritation persists, contact a physician immediately.
- Ingestion: If swallowed, DO NOT induce vomiting. Call a physician immediately.
- Children: Keep out of reach of children.
Image 2: Detailed view of the Toro 114-4713 Hypr-Oil 500 bottle label, highlighting safety and usage instructions.
4. Handling and Disposal
Proper handling and disposal are essential to protect the environment and ensure safety.
- In Case of Spill: Recover any free product immediately. Prevent the product from entering sewers, waterways, or extensive land areas. Advise local authorities if the product has entered or may enter these areas.
- Waste Disposal Method: Dispose of the material in a licensed landfill or incineration facility. Ensure disposal is in accordance with all applicable local, state, and federal regulations.
- Environmental Responsibility: Do not pollute. Conserve resources by returning used oil to designated collection centers.
5. Specifications
| Specification | Value |
|---|---|
| Part Number | 114-4713 |
| Product Name | HYPR-OIL 500 High Performance Hydro Oil |
| Liquid Volume | 1 US Quart (32 FL. OZ.) |
| Package Information | Bottle |
| Package Dimensions | 8.9 x 4.3 x 2.3 inches |
| Item Weight | 1.85 pounds |
| Vehicle Service Type | Lawn Mower |
| Manufacturer | Toro |
6. Setup and Operating Instructions
This product is a replacement fluid. Refer to your equipment's original owner's manual for specific instructions on how to drain existing hydraulic fluid and refill with Toro HYPR-OIL 500. Ensure the equipment is turned off and cooled down before performing any fluid changes.
- Locate the hydraulic fluid reservoir on your Toro landscape contractor mower.
- Follow the manual's instructions for safely draining the old hydraulic fluid.
- Fill the reservoir with Toro HYPR-OIL 500 to the recommended level, using a clean funnel to prevent contamination.
- Check for leaks and ensure the cap is securely fastened.
- Start the engine and operate the hydraulic system briefly to circulate the fluid, then recheck the fluid level and top off if necessary.
7. Maintenance
Regular maintenance of your hydraulic system, including timely fluid changes, is crucial for the longevity and performance of your Toro equipment. Consult your equipment's owner's manual for recommended hydraulic fluid change intervals and procedures.
- Periodically inspect hydraulic lines and connections for signs of wear or leaks.
- Ensure the hydraulic fluid level is maintained within the specified range.
- Replace hydraulic filters as recommended by your equipment's manufacturer.
8. Troubleshooting
If you experience issues with your hydraulic system after using Toro HYPR-OIL 500, consider the following:
- Incorrect Fluid Level: Verify that the hydraulic fluid level is correct. Both overfilling and underfilling can cause performance issues.
- Contamination: Ensure no contaminants were introduced during the fluid change. Use clean tools and funnels.
- Compatibility: Double-check that Toro HYPR-OIL 500 is the correct hydraulic fluid specified for your exact model and year of equipment.
- Air in System: Air trapped in the hydraulic system can cause erratic operation. Consult your equipment manual for bleeding procedures.
For persistent issues, consult a qualified service technician or refer to your equipment's comprehensive troubleshooting guide.
9. Warranty Information
As an OEM part, Toro HYPR-OIL 500 is typically covered under the standard warranty terms for genuine Toro replacement parts. Specific warranty details may vary. Please retain your purchase receipt. For detailed warranty information, refer to the documentation provided with your Toro equipment or contact Toro customer support directly.
10. Support and Contact
For further assistance or inquiries regarding Toro HYPR-OIL 500 or your Toro equipment, please contact the manufacturer:
- Manufacturer: The Toro Company
- Address: 8111 Lyndale Ave S, Bloomington, MN 55420, USA
- Website: www.toro.com
Always provide the product model number (114-4713) and your equipment's serial number when contacting support for efficient service.
