Briggs & Stratton 65787GS

Briggs & Stratton 65787GS Generator Battery Charge Cable Instruction Manual

Model: 65787GS

Introduction

This manual provides essential instructions for the safe and effective use of your Briggs & Stratton OEM 65787GS Generator Battery Charge Cable. This genuine replacement part is designed to facilitate battery charging for compatible Briggs & Stratton and other specified generator models. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Briggs & Stratton 65787GS Generator Battery Charge Cable

Figure 1: The Briggs & Stratton 65787GS Generator Battery Charge Cable. This image displays the cable coiled, featuring a standard two-prong AC plug on one end and two alligator clips (one red, one black) on the other end, designed for connecting to a battery.

Safety Information

Always observe the following safety precautions when handling electrical components and operating generators:

  • Ensure the generator is turned off and cooled down before connecting or disconnecting the battery charge cable.
  • Wear appropriate personal protective equipment, such as safety glasses and gloves.
  • Do not connect the cable to a damaged battery or a battery that is leaking.
  • Connect the positive (red) clip to the positive (+) battery terminal first, then the negative (black) clip to the negative (-) battery terminal.
  • When disconnecting, remove the negative (black) clip first, then the positive (red) clip.
  • Keep the cable away from moving parts, hot surfaces, and sharp edges.
  • Do not use the cable if it is damaged, frayed, or has exposed wires.
  • Refer to your generator's owner's manual for specific battery charging instructions and safety guidelines.

Setup

  1. Prepare the Generator: Ensure your generator is turned off and the engine has cooled down. Locate the battery compartment or battery terminals on your generator.
  2. Inspect the Cable: Before each use, visually inspect the 65787GS battery charge cable for any signs of damage, such as cuts, abrasions, or corrosion on the clips. Do not use a damaged cable.
  3. Connect to Battery:
    • Connect the red alligator clip to the positive (+) terminal of the generator's battery.
    • Connect the black alligator clip to the negative (-) terminal of the generator's battery.
    • Ensure both clips are securely attached to prevent accidental disconnection during charging.
  4. Connect to Power Source: Insert the two-prong AC plug of the charge cable into a standard 120V AC wall outlet.

Operating

Once the cable is properly connected as described in the "Setup" section:

  • The cable will begin to charge the generator's battery. This cable is designed to provide a trickle charge to maintain battery health or slowly recharge a depleted battery.
  • Monitor the charging process according to your generator's battery specifications. Some generators may have an indicator light for charging status.
  • Avoid overcharging the battery. Refer to your generator's manual for recommended charging times or battery maintenance procedures.
  • When charging is complete or if you need to disconnect, first unplug the AC plug from the wall outlet.
  • Then, disconnect the black alligator clip from the negative (-) battery terminal, followed by the red alligator clip from the positive (+) battery terminal.

Maintenance

Proper maintenance ensures the longevity and safe operation of your battery charge cable:

  • Cleaning: Periodically wipe the cable and clips with a dry, clean cloth to remove dirt, dust, or corrosion. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the cable in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. Coil the cable loosely to prevent kinks or damage.
  • Inspection: Regularly inspect the cable for any signs of wear, damage, or loose connections. Replace the cable immediately if any damage is found.
  • Battery Terminals: Ensure generator battery terminals are clean and free of corrosion for optimal connection.

Troubleshooting

ProblemPossible CauseSolution
Battery not charging.
  • Cable not properly connected.
  • AC outlet not providing power.
  • Damaged cable.
  • Battery is severely discharged or faulty.
  • Verify secure connections to both battery terminals and AC outlet.
  • Test the AC outlet with another device.
  • Inspect cable for damage; replace if necessary.
  • Consult generator manual or a professional for battery assessment.
Cable or clips are hot.
  • Loose connections.
  • Overloaded circuit.
  • Internal cable damage.
  • Immediately disconnect. Check and tighten all connections.
  • Ensure the generator's battery is within the cable's intended charging capacity.
  • Discontinue use and replace the cable.

Specifications

  • Part Number: 65787GS
  • Manufacturer: Briggs & Stratton
  • Product Dimensions: 0.39 x 0.39 x 0.39 inches (approximate, as listed)
  • Item Weight: 6.7 ounces
  • Input Voltage: Standard 120V AC (via two-prong plug)
  • Output: Designed for generator battery charging (trickle charge)

Compatibility

The Briggs & Stratton OEM 65787GS Battery Charge Cable is compatible with a wide range of generator models, including but not limited to:

  • Craftsman: 030203-0 (580.328310, 10,000 Watt), 1525-0 (580.329120, 4,200 Watt)
  • Briggs & Stratton: 030207-0 (10,000 Watt), 030207-01 (10,000 Watt), 030335-0 (4,000 Watt), 030336-0 (6,500 Watt), 030337-0 (8,000 Watt), 030338-0 (10,000 Watt), 030342-0 (4,000 Watt), 030381-0 (6,500 Watt), 030382-0 (8,000 Watt), 030383-0 (10,000 Watt), 030384-0 (10,000 Watt), 030455-0 (8,000 Watt), 030554-00 (5,000 Watt), 030555-00 (7,500 Watt), 030556-00 (10,000 Watt), 1775-0 (10,000 Watt BSP10000LE), 9801-7 (10,000 EXL), 9801-8 (10,000 EXL), 9801-9 (10,000 Watt EXL)
  • Troy-Bilt: 030237-0 (7,800 Watt), 1925-0 (7,750 Watt), 1925-1 (7,750 Watt)
  • VOX: 030339-0 (5,500 Watt), 030340-0 (6,500 Watt), 030557-00 (6,500 Watt)
  • Husqvarna: 1935-0 (6,500 Watt), 1935-1 (6,500 Watt)
  • And other models such as 1019-1 (7,500 EXL), 1019-3 (7,500 EXL), 1470-0 (7,000 EXL), 1470-1 (7,500 EXL), 1645-0 (4,000 EXL), 1648-0 (4,500 Watt), 1648-1 (4,500 Watt PowerBoss), 1656-0 (4,000 Watt), 1656-1 (4,000 Watt), 1657-0 (7,000 EXL), 1657-1 (7,000 EXL), 1657-2 (7,000 EXL), 1775-0 (10,000 Watt BSP10000LE), 1894-0 (7,000 Watt), 1894-1 (7,000 Watt), 1932-0 (4,000 Watt PRO), 1932-1 (4,000 Watt PRO CSA), 1933-0 (6,500 Watt PRO), 1933-1 (6,500 Watt PRO CSA), 1934-1 (8,000 Watt PRO), 1934-2 (8,000 Watt PRO CSA), 9777-3 (4,000 XL), 9777-4 (4,000 XL), 9779-4 (6,500 XL).

Always cross-reference the part number with your generator's manual to confirm compatibility.

Warranty and Support

For information regarding warranty coverage, technical support, or to locate authorized service centers, please refer to the official Briggs & Stratton website or contact their customer service department. Keep your purchase receipt as proof of purchase.

For additional resources, you may visit the Briggs & Stratton Store on Amazon.

Related Documents - 65787GS

Preview Briggs & Stratton 7000 Watt Standby Generator: Installation, Start-Up, and Owner's Manual
Comprehensive guide for installing, starting up, and operating a Briggs & Stratton 7000 Watt Standby Generator. Covers safety, procedures, maintenance, and troubleshooting for reliable backup power.
Preview Briggs & Stratton Inverter Generator Operator's Manual
This operator's manual provides comprehensive guidance for the Briggs & Stratton Inverter Generator. It details essential safety precautions, assembly procedures, operational instructions, maintenance schedules, and troubleshooting tips to ensure optimal performance and longevity.
Preview Briggs & Stratton 22,000 Watt Standby Generator Parts Manual 040786-00
Official parts manual for the Briggs & Stratton 22,000 Watt Standby Generator (Mfg. No: 040786-00). This guide details all components, part numbers, and assembly diagrams necessary for maintenance and repair of the generator.
Preview Briggs & Stratton Portable Generator Operator's Manual - Safety, Operation, and Maintenance Guide
Comprehensive operator's manual for Briggs & Stratton portable generators, covering safety guidelines, operating procedures, maintenance schedules, troubleshooting tips, and warranty information. Essential guide for safe and effective use.
Preview Briggs & Stratton 040786-00 Standby Generator Parts Manual | 22,000 Watt
Find detailed part numbers, diagrams, and component information for the Briggs & Stratton 040786-00 22,000 Watt Standby Generator with this official parts manual.
Preview Briggs & Stratton 13,000 Watt Standby Generator Parts Manual (Model 040746-00)
Comprehensive parts manual for the Briggs & Stratton 13,000 Watt Standby Generator, model 040746-00. Includes detailed diagrams and part listings for all major components to aid in maintenance and repair.