1. Introduction
Thank you for purchasing the Muse M-165 CMR Alarm Clock Radio. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Instructions
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Ensure proper ventilation; do not block any ventilation openings.
- Place the unit on a stable, flat surface.
- Do not place objects filled with liquids, such as vases, on the unit.
- Keep the unit away from direct sunlight, heat sources, and strong magnetic fields.
- Only use attachments/accessories specified by the manufacturer.
- Disconnect the unit from the power source during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
3. Package Contents
Please check that the following items are included in your package:
- Muse M-165 CMR Alarm Clock Radio Unit
- AC Power Adapter (assumed, not explicitly listed but standard for clock radios)
- User Manual
4. Product Overview
Familiarize yourself with the main components and controls of your alarm clock radio.
Figure 4.1: The Muse M-165 CMR Alarm Clock Radio in a bedroom setting, showing its compact design and amber digital display.
Figure 4.2: A detailed view of the M-165 CMR's front panel, highlighting the large amber digits for time display and indicators for MW/FM radio bands, alarm 1, alarm 2, and snooze.
Front Panel Controls and Display:
- Large Amber Digital Display: Shows time, radio frequency, and alarm status.
- MW/FM Indicators: Show the currently selected radio band.
- Alarm 1 / Alarm 2 Indicators: Light up when respective alarms are active.
- Snooze Button (SNZ): Temporarily silences the alarm.
Rear Panel Controls:
(Specific button labels are not provided in the product description, but typical controls include:)
- Time Set Button: For adjusting the clock.
- Alarm Set Buttons (AL1, AL2): For setting individual alarms.
- Tuning Buttons: For adjusting radio frequency.
- Volume Control: For adjusting audio output.
- Mode/Function Button: To switch between radio, alarm settings, etc.
- Power ON/OFF Button: To turn the unit on or off.
5. Setup
5.1 Power Connection
- Plug the AC power adapter into the DC input jack on the back of the unit.
- Plug the other end of the adapter into a standard wall outlet.
5.2 Battery Backup (Batteries Not Included)
To maintain time and alarm settings during a power outage, install backup batteries:
- Open the battery compartment cover on the bottom or back of the unit.
- Insert two 1.5V 'AAA' size batteries (not included), observing the correct polarity (+ and -).
- Close the battery compartment cover securely.
5.3 Initial Time Setting
Upon first power-up or after a power outage without backup batteries, the display will flash. Follow these general steps to set the time:
- Press and hold the TIME SET button (or similar, refer to specific button labels on your unit).
- While holding, use the HOUR and MINUTE buttons (or tuning buttons) to adjust the time.
- Release the TIME SET button to confirm.
6. Operating Instructions
6.1 Radio Operation (PLL AM/FM Tuner with 40 Presets)
- Turn On/Off: Press the POWER button to turn the radio on or off.
- Select Band: Press the BAND button (or similar) to switch between FM and AM (MW) bands. The corresponding indicator will light up.
- Manual Tuning: Use the TUNE + / - buttons to manually adjust the frequency.
- Automatic Scan: Press and hold the TUNE + / - buttons for a few seconds to automatically scan for the next available station.
- Setting Presets (40 Presets):
- Tune to your desired station.
- Press the MEMORY or PRESET button. The preset number will flash.
- Use the PRESET + / - buttons to select the desired preset number (1-40).
- Press MEMORY or PRESET again to save the station.
- Recalling Presets: In radio mode, use the PRESET + / - buttons to cycle through your saved stations.
- Volume Control: Use the VOLUME + / - buttons to adjust the sound level.
6.2 Setting Alarms (Dual Alarm by Radio or Buzzer)
The M-165 CMR features two independent alarms. You can set each alarm to wake you up with either the radio or a buzzer sound.
- Select Alarm: Press the ALARM 1 SET or ALARM 2 SET button (or similar). The alarm time will flash.
- Set Alarm Time: While the alarm time is flashing, use the HOUR and MINUTE buttons to set the desired wake-up time.
- Select Alarm Source: Press the ALARM MODE button (or repeatedly press the alarm set button) to cycle through options: RADIO, BUZZER, or OFF. The corresponding indicator (radio icon or buzzer icon) will appear.
- Confirm Alarm: Press the ALARM SET button again to confirm the settings. The alarm indicator (AL1 or AL2) will light up, indicating the alarm is active.
6.3 Snooze Function
When an alarm sounds, press the SNOOZE (SNZ) button to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 9 minutes, though this may vary). The snooze indicator will flash.
6.4 Stopping and Disabling Alarms
- Stopping Alarm: To stop a sounding alarm, press the POWER button. The alarm will reset for the next day.
- Disabling Alarm: To completely turn off an alarm, press the corresponding ALARM SET button repeatedly until the alarm indicator (AL1 or AL2) disappears from the display.
7. Maintenance
7.1 Cleaning
- Always unplug the unit from the power outlet before cleaning.
- Use a soft, dry cloth to clean the exterior of the unit.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
7.2 Battery Replacement
If the backup batteries are low, the time display may become erratic during power outages. Replace the batteries as described in Section 5.2.
8. Troubleshooting
If you encounter issues with your Muse M-165 CMR, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Display off | Power adapter not connected; Power outlet faulty. | Ensure the AC adapter is securely plugged into the unit and a working wall outlet. |
| Radio static / Poor reception | Weak signal; Antenna not extended/positioned correctly; Interference. | Extend and adjust the FM wire antenna. Rotate the unit for better AM reception. Move away from other electronic devices. |
| Alarm does not sound | Alarm not activated; Volume too low (for radio alarm). | Ensure the alarm indicator (AL1/AL2) is lit. Check the alarm time. If using radio alarm, ensure volume is audible. |
| Time is incorrect after power outage | No backup batteries or batteries are depleted. | Install fresh backup batteries (2x AAA). Reset the time. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand | MUSE |
| Model Number | M-165 CMR |
| Dimensions (L x W x H) | 13 x 3.7 x 10.5 cm |
| Weight | 200 grams |
| Power Source | AC Powered (with 3V battery backup, batteries not included) |
| Display Type | Digital, Large Amber Digits |
| Tuner Type | PLL AM/FM |
| Radio Presets | 40 |
| Alarm Type | Dual Alarm (Radio or Buzzer) |
| Special Features | Radio, Snooze Function |
10. Warranty and Support
10.1 Manufacturer's Warranty
This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
10.2 Customer Support
For technical assistance, warranty inquiries, or service requests, please contact your retailer or the official Muse customer support channels. Refer to the contact information provided with your product packaging or on the manufacturer's website.
