TAMIYA 1:10 RC Nismo R34 GT-R Z-Tune (TT-02D) Instruction Manual

1. Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your TAMIYA 1:10 RC Nismo R34 GT-R Z-Tune (TT-02D) model kit. This kit is designed for enthusiasts seeking a detailed and robust drift-spec remote-controlled car experience.

The TT-02D chassis is specifically tuned for drifting, featuring a durable design, CVA oil pressure shock absorbers, ball bearings, an aluminum motor cooler, and drift-tech tires. The kit includes a polycarbonate body, an electronic travel controller (TBLE-02S), and a powerful 540er sport-tuned electric motor.

Note: This product is a kit and requires assembly. Additional accessories such as a remote control with receiver, steering servo, 7.2V NiMH rechargeable battery, charger, and Lexan body paint (Tamiya PS-) are sold separately and are necessary for operation.

2. Safety Information

• Age Restriction: Not suitable for children under the age of 14. Adult supervision is required for assembly and operation by minors.
• Read Instructions: Always read and understand the entire instruction manual before assembly and operation.
• Proper Tools: Use appropriate tools for assembly to prevent injury and damage to components.
• Battery Safety:
  • Use only recommended battery types (7.2V NiMH rechargeable battery).
  • Ensure correct polarity when connecting batteries.
  • Do not short-circuit, disassemble, or expose batteries to extreme temperatures.
  • Charge batteries only with the specified charger and under adult supervision.
• Operating Environment:
  • Operate the RC car in open areas, away from people, pets, and obstacles.
  • Avoid operating near roads, water, or electrical hazards.
  • Do not operate in wet conditions unless the model is specifically designed for it.
• Moving Parts: Keep fingers, hair, and loose clothing away from rotating parts such as wheels and gears.
• Chemicals: Handle Lexan body paint and other chemicals in a well-ventilated area and follow manufacturer's safety guidelines.

3. Setup

3.1. Kit Assembly

Follow the detailed step-by-step instructions provided in the included assembly manual. Pay close attention to diagrams and part numbers. Ensure all screws are tightened securely but do not overtighten.

• Chassis Assembly: Assemble the TT-02D chassis, installing the CVA oil pressure shock absorbers, ball bearings, and aluminum motor cooler.
• Motor Installation: Install the 540er sport-tuned electric motor and connect it to the TBLE-02S electronic travel controller.
• Body Preparation:
  • Carefully cut out the polycarbonate body.
  • Apply window masking film before painting.
  • Paint the Lexan body using Tamiya PS-series paints for best results.
  • Apply decals as desired after the paint has fully dried.
• Tire Installation: Mount the drift-tech tires onto the wheels. Ensure they are securely fitted.

3.2. Necessary Accessories (Sold Separately)

• Remote Control & Receiver: Install the receiver into the chassis and bind it with your remote control according to the manufacturer's instructions.
• Steering Servo: Install the steering servo and connect it to the receiver. Adjust the servo linkages for proper steering alignment.
• Battery & Charger:
  • Charge your 7.2V NiMH rechargeable battery fully before first use.
  • Connect the battery to the electronic travel controller.

4. Operating

4.1. First Run

1. Ensure the battery is fully charged and correctly connected.
2. Turn on your remote control first, then the RC car.
3. Perform a range check to ensure proper communication between the controller and the car.
4. Test steering and throttle response at low speeds in a safe, open area.

4.2. Driving & Drifting

The TT-02D chassis is designed for drift performance. Practice is key to mastering drifting techniques.

• Throttle Control: Smooth and precise throttle input is crucial for maintaining drifts.
• Steering Input: Counter-steer into turns to initiate and hold a drift.
• Tire Management: The drift-tech tires are designed for low-grip surfaces, allowing for controlled slides.

4.3. Product Overview Video

5. Maintenance

• Cleaning:
  • After each use, clean dirt and debris from the chassis, suspension, and drivetrain.
  • Use a soft brush or compressed air. Avoid water unless specified for cleaning.
• Lubrication: Periodically lubricate moving parts such as gears and bearings with appropriate RC-grade lubricant.
• Inspection: Regularly inspect all components for wear, damage, or loose connections. Replace worn parts promptly.
• Battery Care:
  • Store batteries in a cool, dry place when not in use.
  • Do not store fully charged or completely discharged batteries for extended periods.
• Storage: Store the RC car in a dry, dust-free environment, away from direct sunlight and extreme temperatures.

6. Troubleshooting

7. Specifications

8. Warranty & Support

For warranty information, technical support, or replacement parts, please refer to the official TAMIYA website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

TAMIYA offers various tuning parts for the TT-02 chassis, which are sold separately, allowing for further customization and performance enhancements.