Lixada 24W RGBW DJ DMX 512 Stage Light User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your Lixada 24W RGBW DJ DMX 512 Stage Light. Please read these instructions thoroughly before use and retain them for future reference.

The Lixada 24W RGBW DJ DMX 512 Stage Light is a versatile lighting fixture designed for various entertainment and event applications. It features:

• Professional 6-channel DMX-512 control capability.
• Bright, colorful RGBW LED light output.
• Multiple operating modes including Sound Active and Automatic.
• Integrated cooling fan for optimal heat dissipation.
• Convenient remote control for easy adjustments.

2. Safety Instructions

To ensure safe operation, always observe the following precautions:

• Power Supply: Connect the unit only to a grounded power outlet with the specified voltage (100-240V AC, 50/60Hz).
• Moisture: Do not expose the unit to rain or moisture to prevent fire or shock hazards.
• Heat: Avoid placing the unit near heat sources. Ensure adequate ventilation.
• Servicing: Refer all servicing to qualified personnel. Do not attempt to repair the unit yourself.
• Mounting: Always secure the unit properly when mounting overhead. Use safety cables if necessary.
• Direct Eye Exposure: Avoid direct eye exposure to the light source, as it can cause eye damage.
• Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth.

3. Package Contents

Verify that all items are present upon unpacking:

• Lixada 24W RGBW DJ DMX 512 Stage Light Unit
• Remote Control
• Power Cable
• User Manual (this document)

Image: The Lixada stage light unit, its remote control, power cable, and the included instruction manual.

4. Product Overview

Familiarize yourself with the components of your stage light:

Image: The Lixada stage light projecting vibrant, multi-colored patterns onto a surface, demonstrating its effect.

Image: The Lixada stage light emitting distinct red and blue light beams, showcasing its color capabilities.

Image: Rear view of the Lixada stage light, highlighting the control panel with its digital display, DMX IN/OUT ports, and power input socket.

Control Panel

The rear panel features a digital display and buttons for manual control, along with DMX input/output ports and the power connection.

• Display: Shows current mode and settings.
• MENU Button: Navigates through menu options.
• UP/DOWN Buttons: Adjust values or select options.
• ENTER Button: Confirms selections.
• DMX IN/OUT: For connecting to a DMX controller or other DMX fixtures.
• Power Input: For connecting the power cable.
• Microphone: For Sound Active mode.

Image: The remote control for the Lixada stage light, showing buttons for power, DMX mode, various music modes, flash function, and speed adjustments for flash and motor.

Remote Control

The included remote control allows for convenient wireless operation of the light's functions.

• ON/OFF: Power on/off the light.
• LED ON/OFF: Turns the LED lights on or off.
• DMX ON/OFF: Activates or deactivates DMX control.
• STOP/START: Pauses or resumes current effect.
• MUSIC 1/2/3: Activates different sound-activated modes.
• FLASH: Activates strobe effect.
• A1-A7: Selects various automatic programs.
• FLASH SPEED +/-: Adjusts strobe speed.
• MOTOR SPEED +/-: Adjusts motor rotation speed.

5. Setup

5.1 Unpacking and Inspection

1. Carefully remove the unit from its packaging.
2. Inspect the unit for any damage that may have occurred during shipping. If damage is found, do not operate and contact your supplier.

Image: The brown cardboard packaging box for the Lixada stage light, showing product graphics and branding.

5.2 Mounting

The unit can be placed on a flat surface or mounted to a truss or stand using the integrated mounting bracket. Ensure the mounting surface or structure can support the weight of the fixture.

• Use appropriate clamps (not included) when mounting to a truss.
• Always use a safety cable (not included) when mounting overhead.
• Ensure the unit is positioned to allow for adequate ventilation around the fan openings.

5.3 Power Connection

Connect the supplied power cable to the power input on the rear of the unit and then to a suitable grounded power outlet (100-240V AC, 50/60Hz).

5.4 DMX Connection (Optional)

If using a DMX controller, connect a standard 3-pin DMX cable from the DMX OUT of your controller to the DMX IN of the stage light. For multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next, and so on.

6. Operating Modes

The Lixada Stage Light offers several operating modes, selectable via the control panel or remote control.

6.1 Automatic Mode

In Automatic mode, the light cycles through various pre-programmed patterns and color changes. Use the remote control buttons A1-A7 to select different automatic programs.

6.2 Sound Active Mode

The light reacts to ambient sound or music via its built-in microphone. Use the remote control buttons MUSIC 1, MUSIC 2, or MUSIC 3 to select different sound-activated programs.

6.3 DMX Mode

For advanced control, connect the unit to a DMX-512 controller. The light uses 6 DMX channels. Refer to the DMX Channel Chart below for specific functions.

To activate DMX mode, ensure the DMX ON/OFF button on the remote is pressed, or select DMX mode via the control panel menu.

DMX Channel Chart

7. Maintenance

7.1 Cleaning

Regular cleaning helps maintain optimal light output and extends the unit's lifespan.

• Disconnect the unit from power before cleaning.
• Use a soft, lint-free cloth to wipe the exterior.
• For lenses, use a specialized lens cleaning solution and cloth to avoid scratches.
• Periodically clean the fan vents to prevent dust buildup, which can hinder cooling.

7.2 Storage

When not in use, store the unit in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

• No Power:
  Check: Ensure the power cable is securely connected to both the unit and a working power outlet. Verify the outlet has power.
  Solution: Try a different power outlet or cable.
• No Light Output:
  Check: Ensure the unit is powered on and not in DMX mode without a DMX signal. Check if the LED ON/OFF button on the remote was pressed.
  Solution: Cycle power, check remote settings, or verify DMX connection/signal.
• Remote Control Not Working:
  Check: The remote requires a CR2025 button cell battery. Check if the battery is inserted correctly or needs replacement. Ensure there are no obstructions between the remote and the unit's IR receiver.
  Solution: Replace the remote battery. Point the remote directly at the unit.
• Light Effects Are Static or Not Moving:
  Check: In some modes, the motor speed might be set to minimum. A review mentioned a loose motor panel.
  Solution: Adjust 'MOTOR SPEED +' on the remote. If the issue persists and you are comfortable, inspect for loose internal components (refer to qualified technician if unsure).
• Unit Overheating:
  Check: Ensure the fan vents are clear and not obstructed. The unit has an integrated fan for heat dissipation.
  Solution: Clear any obstructions from the vents. Ensure the unit is in a well-ventilated area.
• DMX Control Issues:
  Check: Verify DMX cable connections. Ensure the DMX address is correctly set on the unit and matches your controller. Confirm the unit is in DMX mode.
  Solution: Re-check DMX cabling and addressing. Ensure DMX ON/OFF is active.

If problems persist, contact customer support.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.