Rugged Ridge Multi-Mount Phone Kit for Jeep Wrangler JK (2007-2010)

Introduction

The Rugged Ridge Multi-Mount Phone Kit is designed to integrate seamlessly into the dashboard of 2007-2010 Jeep Wrangler JK models. This kit provides a stable and accessible platform for mounting your smartphone, GoPro, or other POV cameras, enhancing convenience and safety by keeping your device within view without obstructing your driving. The custom-fitted cradle ensures your device remains secure during various driving conditions, including off-road adventures. Installation is straightforward and requires no drilling.

Package Contents

• Dash Multi-Mount Phone Kit (1)
• Phone Cradle (1)
• Mounting Hardware (typically integrated clips)

Installation Instructions

This kit is designed for easy installation into the dash recess of 2007-2010 Jeep Wrangler JK vehicles. No drilling is required.

1. Prepare the Dashboard: Carefully remove the existing dash cap from your Jeep Wrangler JK. This typically involves gently prying it up from the edges.
2. Position the Multi-Mount: Align the Rugged Ridge Multi-Mount Phone Kit with the dash recess. Ensure the clips on the underside of the new mount align with the corresponding slots in the dashboard.
3. Secure the Mount: Press down firmly on the Multi-Mount until the clips engage and it sits flush and securely in the dash recess. The mount should feel stable with minimal movement.
4. Attach the Phone Cradle: The phone cradle typically attaches to a 17mm ball mount integrated into the dash multi-mount. Secure the phone cradle onto this ball mount and adjust its position as desired.

Image: The Rugged Ridge Multi-Mount Phone Kit, showing the dash tray and the integrated 17mm ball mount for the phone cradle.

Image: The Multi-Mount Phone Kit installed in a Jeep Wrangler JK dashboard, with a smartphone securely held in the cradle, displaying a map application.

Operating Instructions

• Mounting Your Phone: The phone cradle is adjustable and designed to securely hold smartphones up to 3.6 inches wide. Gently expand the cradle arms, insert your phone, and release the arms to grip the device firmly.
• Adjusting Viewing Angle: The phone cradle is attached to a 17mm ball mount, allowing for adjustment of the viewing angle. Loosen the collar on the ball mount, position your phone for optimal visibility, and then tighten the collar to secure the angle.
• Using the Storage Tray: The dash multi-mount also features integrated trays for small items such as sunglasses, coins, or other accessories.
• Alternative Mounts: The 17mm ball mount is compatible with various other mounting accessories. If you prefer not to use the included phone cradle, it can be removed, and other 17mm ball-compatible devices can be attached.

Image: A smartphone mounted in the Rugged Ridge Multi-Mount Phone Kit, demonstrating how a device fits into the adjustable cradle.

Maintenance

To ensure the longevity and proper function of your Rugged Ridge Multi-Mount Phone Kit, follow these simple maintenance guidelines:

• Cleaning: Wipe the mount and phone cradle with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the thermoplastic olefin (TPO) material.
• Check Security: Periodically check that the mount remains securely seated in the dash recess. If it feels loose, gently press down to re-engage the clips.
• Inspect Cradle: Ensure the phone cradle's adjustable arms move freely and grip your device firmly. If any part appears damaged, discontinue use and consider replacement.

Troubleshooting

Issue: The Multi-Mount does not sit securely or pops out of the dash recess.

Solution: Ensure the original dash clips are properly removed and the new mount's clips are fully engaged. If the mount still feels loose, some users have found success by applying a thin strip of strong double-sided adhesive tape (e.g., 3M foam tape) to the underside of the mount where it contacts the dash. This can provide additional friction and stability.

Issue: Phone cradle does not hold the phone tightly or shakes excessively.

Solution: Verify that the phone is correctly centered and fully inserted into the cradle. Ensure the adjustable arms are gripping the phone firmly. If the issue persists, check the tightness of the collar on the 17mm ball mount. Tighten it clockwise until the cradle is stable. If the phone is too large or too small for the cradle's specified range (up to 3.6 inches wide), it may not be held securely.

Issue: Compass sensor interference when a device is mounted.

Solution: Some electronic devices, particularly GPS units, can interfere with the vehicle's compass sensor when placed directly above it. If your vehicle's compass readings become erratic, try relocating the interfering device or using an alternative navigation method. The vehicle's compass should return to normal operation once the device is removed.

Specifications

Official Product Video

Warranty Information

Specific warranty details for the Rugged Ridge Multi-Mount Phone Kit (Model 13551.17) are not provided in the available product data. Please refer to the manufacturer's official website or contact Rugged Ridge customer support for comprehensive warranty information.

Customer Support

Contact information for customer support is not provided in the available product data. For assistance with installation, troubleshooting, or product inquiries, please visit the official Rugged Ridge website or consult your product packaging for support contact details.