1. Product Overview
The Diversey J-512 Sanitizer is a concentrated liquid sanitizer designed for effective surface disinfection. This product is formulated with a neutral pH and is EPA registered, ensuring its efficacy and safety when used as directed. It is suitable for use on various surfaces, including metal and plastic, and does not require rinsing after application.
Image: Diversey J-512 Sanitizer in its original packaging, showing two 2.5-liter bottles.
Key Features:
- Concentrated formula for economical use.
- EPA Registered (Registration Number 70627-63).
- Neutral pH level (7.9).
- No rinse required after application.
- Butyl-free and non-flammable.
- Unscented formulation.
2. Safety Information
WARNING: Keep out of reach of children. Read all instructions and safety data sheets before use.
- Avoid contact with eyes and skin. In case of contact, flush thoroughly with water.
- Do not ingest. If swallowed, seek medical attention immediately.
- Use in a well-ventilated area.
- Store in original container in a cool, dry place, away from direct sunlight and incompatible materials.
- Dispose of contents/container in accordance with local regulations.
This product is EPA registered, indicating it has been evaluated for its intended use and potential risks. Always follow the dilution and application instructions precisely to ensure both effectiveness and safety.
3. Setup
The Diversey J-512 Sanitizer is a concentrated product and must be diluted before use. It is designed to be compatible with J-Fill dispenser series for accurate dilution.
3.1 Dilution Instructions
- Ensure you are wearing appropriate personal protective equipment (PPE) such as gloves and eye protection.
- Connect the J-512 Sanitizer container to a compatible J-Fill dispenser.
- The recommended dilution ratio is 1:512 (1 part sanitizer to 512 parts water). The J-Fill dispenser will automatically provide the correct dilution.
- Dispense the diluted solution into a clean spray bottle, bucket, or other appropriate application container.
- Do not mix with other cleaning agents or chemicals.
3.2 Container Type
The product is supplied in 2.5 L bottles, designed for use with the J-Fill dispensing system.
4. Operating Instructions
Follow these steps for effective sanitization:
- Pre-clean Surface: Before applying the sanitizer, thoroughly clean the surface to remove gross filth and heavy soil. This ensures the sanitizer can effectively contact and disinfect the surface.
- Apply Solution: Apply the properly diluted J-512 Sanitizer solution to the pre-cleaned surface using a spray bottle, cloth, sponge, or by immersing the item. Ensure the entire surface is thoroughly wetted.
- Dwell Time: Allow the solution to remain on the surface for the recommended contact time as specified on the product label (typically 60 seconds for sanitization, but always refer to the label for precise instructions).
- No Rinsing: This product is formulated as a no-rinse sanitizer. After the required dwell time, allow the surface to air dry. No wiping or rinsing is necessary, which helps maintain the sanitizing effect.
- Food Contact Surfaces: For food contact surfaces, ensure the surface is completely dry before contact with food.
5. Maintenance
5.1 Storage
Store the Diversey J-512 Sanitizer in its original, tightly closed container in a cool, dry, well-ventilated area. Protect from freezing and direct sunlight. Keep away from incompatible materials and food products. The recommended storage temperature range is typically between 40°F (4°C) and 100°F (38°C).
5.2 Handling Precautions
- Always handle containers carefully to prevent spills.
- Ensure proper ventilation when transferring or diluting the product.
- In case of a spill, contain the liquid and absorb with an inert material. Dispose of contaminated material according to local regulations.
6. Troubleshooting
If you encounter issues while using the Diversey J-512 Sanitizer, consider the following:
- Ineffective Sanitization:
- Ensure the surface was properly pre-cleaned to remove all visible soil.
- Verify the correct dilution ratio (1:512) was used. Improper dilution can reduce effectiveness.
- Confirm the solution remained on the surface for the full recommended dwell time.
- Dispenser Issues:
- If the J-Fill dispenser is not functioning correctly, check the connection to the product container and water supply.
- Ensure the dispenser is clean and free from blockages.
- Product Appearance/Odor:
- The product is unscented. Any unusual odor may indicate contamination or improper storage.
- If the product appears discolored or has separated, do not use it.
For persistent issues, contact Diversey customer support.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | 5756034 |
| Product Dimensions | 9.9 x 5.7 x 9.6 inches |
| Item Weight | 12 Pounds |
| Item Volume | 2.5 Liters (per bottle) |
| Container Type | Bottle |
| Cleaner Form | Liquid |
| Primary Chemical | Quat |
| pH Level | 7.9 (Neutral) |
| Recommended Dilution | 1:512 |
| EPA Registered | Yes (EPA Registration Number 70627-63) |
| Flash Point | 200 Degrees F |
| VOC Content | 0 Percent |
| Fragrance | Unscented |
| Surface Recommendation | Metal, Plastic |
| Manufacturer | Diversey |
8. Warranty Information
Specific warranty details for the Diversey J-512 Sanitizer are not provided in the product information. For warranty inquiries, please contact Diversey directly or refer to your purchase agreement.
9. Support
For further assistance, technical support, or safety data sheets (SDS), please contact Diversey customer service. You can typically find contact information on the product label or the official Diversey website.
Manufacturer: Diversey
Website: www.diversey.com (Please note: This is a general link and may not be specific to your region. Refer to product packaging for region-specific contact details.)
