Midland T10 X-TALKER Two-Way Radios Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Midland T10 X-TALKER Two-Way Radios. These radios offer reliable communication with 22 FRS channels and 38 privacy codes, along with NOAA Weather Alert capabilities, making them suitable for various outdoor activities and general use.

What's in the Box

Your Midland T10 X-TALKER package includes the following items:

• Two (2) Midland T10 X-TALKER Two-Way Radios
• Two (2) Belt Clips
• One (1) Owner's Manual

Image Description: A top-down view of the package contents, showing two black Midland X-TALKER radios, two black belt clips, and an owner's manual, all neatly arranged.

Features Overview

The Midland T10 X-TALKER radios are designed for clear and efficient communication with several key features:

• 22 FRS Channels: Provides a wide range of communication options.
• 38 CTCSS Privacy Codes: Enhances communication privacy by filtering out unwanted transmissions.
• NOAA Weather Scan + Alert: Automatically scans 10 weather band channels and alerts you to severe weather.
• eVOX (Easy Voice and Sound Activated Transmission): Allows for hands-free operation.
• Long Range Communication: Optimized for extended range in open areas.
• Compact and Lightweight Design: Easy to carry and handle.
• Backlit LCD Display: Provides visibility in low-light conditions.

Image Description: A close-up view of the Midland T10 X-TALKER radio, with key features labeled: Push to Talk Button, Channel Display, VOX - Hands-Free Communication, Battery Meter, Menu, Scan, Silent Operation, and WX (Weather) button.

Setup

Battery Installation

The Midland T10 radios are designed to operate with a rechargeable Li-ion battery (Model: BL-10C, 3.7V/1200mAh). To install the battery:

1. Remove the belt clip by pinching the release tab and sliding the clip upwards.
2. Open the battery compartment cover located on the back of the radio.
3. Insert the BL-10C Li-ion battery into the compartment, ensuring correct polarity.
4. Replace the battery compartment cover and reattach the belt clip.

Charging the Battery

To charge your Midland T10 radio:

1. Locate the USB-C charging port on the side of the radio, protected by a rubber flap.
2. Connect the provided USB-C charging cable to the radio's charging port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., wall adapter, computer USB port).
4. The battery indicator on the LCD display will show charging status.

Video Description: A user demonstrates how to remove the belt clip, open the battery compartment, insert the rechargeable Li-ion battery, and then connect the USB-C charging cable to the radio. The video also shows the battery specifications on the battery itself.

Basic Operation

Power On/Off

To power on or off the radio, press and hold the MENU/POWER button located below the display.

Volume Control

Adjust the volume using the UP and DOWN arrow buttons. The current volume level will be displayed on the screen.

Channel Selection

To select a channel:

1. Press the MENU button once. The channel number will flash.
2. Use the UP or DOWN arrow buttons to select your desired channel (1-22).
3. Press the MENU button again to confirm your selection, or wait a few seconds for the radio to automatically confirm.

Push-to-Talk (PTT)

To transmit, press and hold the PTT button located on the left side of the radio. Speak clearly into the microphone. Release the PTT button to receive transmissions.

Advanced Features

Privacy Codes (CTCSS)

The T10 radios feature 38 CTCSS (Continuous Tone Coded Squelch System) Privacy Codes to minimize interference from other users on the same channel. To set a privacy code:

1. Press the MENU button twice. The privacy code number will flash.
2. Use the UP or DOWN arrow buttons to select your desired privacy code (1-38).
3. Press the MENU button again to confirm, or wait for automatic confirmation.

Note: Both radios must be on the same channel and privacy code to communicate.

NOAA Weather Scan + Alert

Stay informed about weather conditions with the NOAA Weather Scan and Alert feature:

• Weather Scan: Press and hold the WX button to activate NOAA Weather Scan. The radio will automatically scan through 10 available weather (WX) band channels and lock onto the strongest weather channel.
• Weather Alert: When activated, the NOAA Weather Alert will sound an alarm indicating a risk of severe weather in your area. NOAA Weather Radio also broadcasts AMBER alerts.

eVOX (Hands-Free Operation)

The eVOX feature allows you to transmit without pressing the PTT button. The radio detects your voice and automatically transmits. Refer to the owner's manual for detailed eVOX sensitivity settings.

Range and Performance

The Midland T10 X-TALKER radios offer varying ranges depending on terrain and obstructions:

• No Obstruction: Up to 20 miles in open areas with clear line of sight.
• Partial Obstruction: 2-5 miles in areas with some trees or light buildings.
• Obstructed: Less than 1 mile in urban areas with heavy buildings or dense foliage.

Image Description: A diagram showing three scenarios for radio range: 'No Obstruction' (up to 20 miles), 'Partial Obstruction' (2-5 miles with trees), and 'Obstructed' (less than 1 mile with city buildings). Actual distance may vary.

Video Description: An official product video showcasing the Midland X-TALKER T10 walkie-talkie, highlighting its features and ease of use for various communication needs.

Maintenance

To ensure optimal performance and longevity of your Midland T10 radios:

• Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
• Battery Care: Fully charge batteries before extended storage. If storing for long periods, remove batteries.
• Storage: Store radios in a cool, dry place away from extreme temperatures and direct sunlight.
• Water Resistance: The radios are water resistant. Avoid submerging them in water. Ensure the USB-C port cover is securely closed when not charging.

Troubleshooting

If you experience issues with your Midland T10 radios, try the following:

• No Power: Check battery charge level. Ensure batteries are correctly installed.
• Cannot Transmit/Receive: Verify both radios are on the same channel and privacy code. Ensure the PTT button is fully pressed when transmitting. Check for obstructions if range is limited.
• Static/Poor Audio: Move to an area with fewer obstructions. Adjust volume. Try a different channel.
• Keypad Locked: If the keypad is locked, press and hold the lock button (usually the MENU button) until the lock icon disappears from the display.

Specifications

Warranty and Support

The Midland T10 X-TALKER Two-Way Radios come with a Three Year Warranty. For warranty claims, technical support, or additional information, please refer to the contact details provided in your owner's manual or visit the official Midland website.