Diversey Suma Eliminex D3.1 Liquid Drain and General Purpose Cleaner Instruction Manual

1. Product Overview

Diversey Suma Eliminex D3.1 is a chlorinated, high-alkaline liquid cleaner designed for effective drain cleaning and general purpose applications. It utilizes clinging foam technology to provide superior contact time on drain surfaces, ensuring thorough cleaning.

Image 1: Diversey Suma Eliminex D3.1 5L bottle with attached spray nozzle.

Key Features:

• Extended Contact Time: Thickened foam ensures superior cling to drain surfaces for effective cleaning.
• No-Touch Cleaning: Promotes a safer and more sanitary cleaning procedure.
• Cost Savings: Offers a 20% to 30% cost reduction compared to traditional drain cleaning methods.
• Ease of Use: Simplifies the drain cleaning process, reducing labor requirements.
• Safe for Soft Metals: Suitable for use on brass, aluminum, galvanized metal, and garbage disposal units.

2. Safety Information

This product contains strong chemical agents. Always handle with care and follow all safety precautions.

• Personal Protective Equipment (PPE): Always wear appropriate gloves and eye protection when handling this product.
• Ventilation: Use in a well-ventilated area.
• Skin and Eye Contact: In case of contact, rinse immediately with plenty of water and seek medical advice.
• Ingestion: Do not ingest. If swallowed, seek immediate medical attention.
• Storage: Store in a cool, dry place, away from direct sunlight and incompatible materials. Keep out of reach of children and pets.
• Disposal: Dispose of contents and container in accordance with local regulations.

Refer to the product's Safety Data Sheet (SDS) for complete safety information.

3. Setup

Before use, ensure you have the necessary equipment and have read the safety information.

1. Inspect Product: Verify the product container is sealed and undamaged.
2. Prepare Area: Clear the area around the drain or surface to be cleaned.
3. Connect Dispenser: Connect the product container to a water hose using the appropriate dispensing equipment. Ensure a secure connection to prevent leaks.

Image 2: Example of a hose attachment for connecting the product container to a water source.

4. Operating Instructions

Follow these steps for effective application of Diversey Suma Eliminex D3.1:

1. Connect Product Container: Connect the product container to the water hose.
2. Set Dispensing Selector: Set the dispensing selector knob to the high flow position.
3. Spray Product: Spray the diluted product into the drain for 2 to 10 seconds, adjusting duration based on the drain size.
4. Allow Contact Time: Allow 30 to 60 seconds contact time for the foam to work effectively.
5. Rinse Drain: Set the dispensing selector knob to rinse and thoroughly rinse the drain.
6. Prevent Drying: Do not allow the product to dry in the drain.
7. Air Dry: Allow the cleaned area to air dry.
8. Food Contamination: Avoid contamination of food during use or storage.

Image 3: Application of Diversey Suma Eliminex D3.1 into a floor drain, demonstrating foam action.

5. Ingredients

The following ingredients are present in Diversey Suma Eliminex D3.1:

• Aqua
• Sodium Hypochlorite
• Potassium polyacrylate
• Disodium Trisilicate
• Myristamine Oxide
• Potassium Hydroxide
• Sodium Xylene Sulfonate
• Potassium Dodecylbenzenesulfonate
• Lauramine Oxide
• Potassium octanoate
• 1-hexadecanamine, n,n-dimethyl-, n-oxide

6. Maintenance and Storage

Proper maintenance and storage ensure the longevity and effectiveness of the product.

• Storage Conditions: Store the product in its original container in a cool, dry, and well-ventilated area.
• Temperature: Avoid extreme temperatures. Do not freeze.
• Container Integrity: Keep the container tightly closed when not in use to prevent evaporation and contamination.
• Incompatible Materials: Store away from acids, reducing agents, and organic materials.
• Post-Use Cleaning: After each use, ensure the dispensing equipment is clean and free of product residue.

7. Troubleshooting

If you encounter issues while using Diversey Suma Eliminex D3.1, consider the following:

• No Foam/Poor Foam:
  • Check water pressure and flow rate.
  • Ensure the dispensing selector knob is set correctly for foaming.
  • Verify the product container is not empty.
• Ineffective Cleaning:
  • Increase contact time within the recommended range (30-60 seconds).
  • Ensure proper dilution ratio if using a variable dispenser.
  • Confirm the product is suitable for the specific type of blockage or soil.
• Leaks from Dispenser:
  • Check all connections for tightness.
  • Inspect O-rings and seals for damage.

For persistent issues, contact Diversey customer support.

8. Specifications

9. Warranty and Support

For information regarding product warranty, technical support, or any other inquiries, please contact Diversey customer service directly. Contact details can typically be found on the product packaging or the official Diversey website.

Online Resources: Visit the Diversey Store on Amazon for additional product information and resources.