Glade PlugIns Scented Oil Refills Instruction Manual

Product Overview

This manual provides instructions for the Glade PlugIns Scented Oil Refills, featuring the Blooming Peony & Cherry fragrance. These refills are designed to be used with Glade PlugIns warmers to deliver continuous fragrance in your home.

Image: Glade PlugIns Scented Oil Refills, Blooming Peony & Cherry, 2 Count packaging.

Setup and Installation

Follow these steps to properly set up your Glade PlugIns Scented Oil Refill with a compatible Glade PlugIns warmer.

1. Remove Refill Cap: Unscrew the cap from the fragrance oil bottle.

Image: Illustration showing how to unscrew the cap from the refill bottle.
2. Insert into Warmer: Insert the fragrance bottle into the Glade PlugIns warmer. Ensure the bottle is upright.


Image: Illustration showing the refill bottle being inserted into the warmer unit.

3. Adjust Plug (if needed): Rotate the warmer's electrical plug if necessary to ensure it can be inserted upright into an electrical outlet.

Image: Illustration showing the adjustable plug on the Glade warmer being rotated.
4. Plug into Outlet: Insert the warmer upright into a standard electrical outlet. Keep the fragrance bottle upright at all times.


Image: Illustration of the Glade warmer plugged into a wall outlet.

Note: Always refer to the safety and use instructions provided with your specific Glade PlugIns warmer model.

Operating Instructions

Once installed, you can adjust the fragrance intensity of your Glade PlugIns warmer.

1. Adjust Fragrance Intensity: Twist the top of the warmer unit to set your desired fragrance intensity. The warmer offers adjustable settings to meet your needs.


Image: Close-up of the Glade PlugIns warmer showing the top dial for adjusting fragrance intensity.

2. Enjoy Continuous Fragrance: The warmer will now release the Blooming Peony & Cherry fragrance continuously. Each refill can last up to 50 days on a low setting.

Important: Wash hands thoroughly after handling the fragrance oil refills.

Maintenance and Refill Replacement

When the fragrance oil bottle is empty, it's time to replace the refill.

1. Remove Empty Refill: Unplug the warmer from the outlet. Carefully pull the empty fragrance bottle downwards and out of the warmer unit.
2. Insert New Refill: Follow the "Setup and Installation" steps to insert a new Glade PlugIns Scented Oil Refill.

Note: Only use Glade PlugIns Scented Oil Refills in Glade PlugIns Scented Oil warmers.

Safety Information

Please read and adhere to the following safety guidelines:

• CAUTION: EYE IRRITANT: Contains fragrance oils. Avoid contact with eyes.
• FIRST AID - EYES: Immediately rinse with plenty of water for at least 15 minutes. If irritation persists, seek medical attention.
• IF SWALLOWED: Do not induce vomiting. Immediately call a physician or poison control center.
• KEEP OUT OF REACH OF CHILDREN AND PETS.
• Do not use in small, confined pet areas without adequate ventilation.

Image: Back of the Glade PlugIns Refills packaging, showing safety warnings and instructions.

Ingredients

The Glade PlugIns Scented Oil Refills contain fragrance oil. The specific product formula number is 35*34705.

This product is made without phthalates, formaldehyde, nitro musks, artificial colors, or dyes.

Product Specifications

Product Video Guide

Watch this official video for a visual guide on how to use Glade PlugIns Scented Oil.

Support and Contact Information

For questions, comments, or further assistance, please contact Glade customer support.

• Customer Service Phone: 800-558-5252
• Manufacturer: SC Johnson
• Address: Racine, WI 53403-2236 U.S.A.
• Product UPC: 0046500763472