Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.
- Read all instructions carefully before installation.
- Ensure the electrical supply is disconnected before handling the fixture.
- All wiring connections must be in accordance with local and national electrical codes.
- Do not exceed the specified voltage (120 Volts).
- This fixture is designed for indoor use only.
Package Contents
Verify that all components are present before beginning installation:
- LED Flush Mount Fixture (with integrated AC Module)
- Glass Shade
- Mounting Hardware Kit (screws, wire nuts, mounting strap)
- Instruction Manual
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Pliers
- Electrical Tape
- Safety Glasses
Setup and Installation
Follow these steps to properly install your LED flush mount fixture:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltage tester.
- Prepare Mounting: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
- Wiring Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
- Carefully tuck all wires into the junction box.
- Attach Fixture: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
- Install Glass Shade: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
- Restore Power: Turn the power back on at the circuit breaker or fuse box.
Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.
Image: Examples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.
Operating Instructions
Once installed, operate your LED flush mount fixture as follows:
- Power On/Off: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
- Dimming: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.
Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.
Maintenance
The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:
- Cleaning: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. | Check circuit breaker/fuse. Ensure wall switch is on. Disconnect power and check wiring connections. |
| Light flickers or dims improperly. | Incompatible dimmer switch. Loose wiring. | Ensure dimmer is LED-compatible. Disconnect power and check wiring connections. |
| Fixture is humming. | Incompatible dimmer switch. | Replace with an LED-compatible dimmer switch. |
Specifications
Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:
- Model Number: P3408-0930K9
- Brand: Progress Lighting
- Color: Brushed Nickel
- Material: Alloy Steel, Glass
- Style: Contemporary
- Light Fixture Form: Close to Ceiling
- Product Dimensions: 9.25"L x 9.25"W x 4.63"H
- Indoor/Outdoor Usage: Indoor
- Power Source: Corded Electric
- Installation Type: Flush Mount
- Light Source Type: Integrated LED (AC Module)
- Number of Light Sources: 1
- Voltage: 120 Volts
- Light Color: Warm White (3000K)
- Brightness: 1211 Lumens
- Wattage: 17 Watts
- Color Rendering Index (CRI): 90
- Dimmable: Yes, with compatible wall dimmer
- Assembly Required: Yes
- Country of Origin: China
- UPC: 785247189168
Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.
Warranty Information
This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.
Customer Support
If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting website or through your retailer.
Online Resources: For additional information and support, visit the Progress Lighting Store on Amazon.
