1. Product Overview
The Intermatic Smart Guard IG2240-IMSK is an advanced Whole Home Surge Protective Device (SPD) designed to safeguard your valuable electronic equipment and appliances from damaging power surges. This innovative unit incorporates IModules with LED indicators for easy status monitoring and utilizes state-of-the-art TPMOV (Thermally Protected Metal Oxide Varistor) technology for superior surge protection.
It is suitable for both Type 1 applications (outdoor installations before service entrances and utility meter cabinets) and Type 2 applications (installations after service entrances).
2. Safety Information
WARNING: Risk of Electric Shock
- Installation and servicing of this device must be performed by qualified personnel only.
- Turn the Module Power Switch to the "OFF" position before replacing Consumable Surge Modules. The Module Power Switch is NOT used as an over-current protective device (OCPD).
- Disconnect power at the main service panel before any installation or maintenance.
- For outdoor locations, wet locations, or conduit hubs, ensure compliance with requirements of UL1449 for conduit and conduit box entries.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (Proposition 65 Warning)
Always adhere to local electrical codes and regulations during installation.
3. Key Features
- Easy Maintenance with IModules: Equipped with three IModules, each featuring LED lights for quick power and protection status indication. These modules can be easily replaced without needing to install a new SPD unit.
- Extended Warranty: Includes a $50,000 connected equipment warranty for 10 years, providing peace of mind for your connected appliances and electronics.
- Convenient Module Power Switch: The integrated Module Power Switch allows for safe disconnection of power to the modules when replacing them, ensuring hassle-free maintenance.
- Durable and Tamper-Proof Design: Features a Type 1 Enclosure suitable for indoor metal applications, offering robust protection. Tamper-proof IMODULE doors enhance security.
- Comprehensive Protection: Employs TPMOV surge protection technology across six modes to safeguard your valuable appliances and electronics.
4. Setup and Installation
Installation of the Intermatic IG2240-IMSK surge protector requires professional electrical knowledge. It is strongly recommended that a licensed electrician performs the installation to ensure safety and compliance with all local and national electrical codes.
The device can be installed in two primary configurations:
- Type 1 Applications: Installation outdoors, before the service entrance, or within utility meter cabinets.
- Type 2 Applications: Installation after the service entrance.
Refer to the detailed installation manual provided with the product for wiring diagrams and specific mounting instructions. Ensure the Module Power Switch is in the "OFF" position during installation.
Figure 1: Front view of the Intermatic IG2240-IMSK Whole Home Surge Protector, showing the module power switch, three IModules with LED indicators, and safety warnings.
Figure 2: The Intermatic IG2240-IMSK Whole Home Surge Protector with its front cover open, revealing the internal wiring and mounting points.
5. Operating Instructions
Once properly installed and powered, the Intermatic IG2240-IMSK operates automatically to protect your home from surges. The status of the surge protector is indicated by the LED lights on the IModules:
- Blue Light ON: Indicates that the SPD unit is powered ON.
- Green Light ON: Indicates that surge protection is active and functioning correctly.
- No Green Light (or Red Light/Other Indication): Indicates that protection has been compromised and the IModule needs to be replaced.
Ensure the Module Power Switch is in the "ON" position for normal operation after installation and maintenance.
6. Maintenance
The Intermatic IG2240-IMSK is designed for easy maintenance, primarily involving the replacement of IModules when their protection is compromised.
- Identify Compromised Module: Observe the LED indicators on each IModule. If a green light is not illuminated, that specific module's protection has been compromised.
- Turn Off Power: Locate the Module Power Switch on the IG2240-IMSK unit and turn it to the "OFF" position. This disconnects power to the modules, allowing for safe replacement.
- Replace IModule: Carefully remove the compromised IModule and insert a new, compatible Intermatic IModule.
- Restore Power: Once the new module is securely in place, turn the Module Power Switch back to the "ON" position. Verify that the blue and green LED lights illuminate on the newly installed module.
Regularly inspect the unit and its indicators to ensure continuous protection.
7. Troubleshooting
- No Lights on IModules: Check if the Module Power Switch is in the "ON" position. If it is, verify that the main power supply to the surge protector is active. If issues persist, consult a qualified electrician.
- Blue Light ON, but Green Light OFF on an IModule: This indicates that the specific IModule's surge protection has been compromised. Follow the maintenance steps in Section 6 to replace the affected module.
- Frequent Module Replacement: If IModules are failing frequently, it may indicate persistent power quality issues or severe surge activity in your area. Consider consulting a qualified electrician or power utility for an assessment of your electrical system.
- Device Not Functioning After Power Outage: Ensure all power is restored and the Module Power Switch is ON. If the unit still does not function, it may require professional inspection.
For any issues beyond basic module replacement, always contact a qualified electrician or Intermatic customer support.
8. Specifications
| Specification | Detail |
|---|---|
| Manufacturer | Intermatic |
| Part Number | IG2240-IMSK |
| Item Weight | 7 pounds |
| Product Dimensions | 10.75 x 3.75 x 10 inches |
| Item Model Number | IG2240-IMSK |
| Color | Black |
| Style | Protector |
| Material | Metal |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Included Components | IG2240-IMSK |
| Batteries Included? | No |
| Batteries Required? | No |
| First Available Date | September 9, 2013 |
9. Warranty and Support
The Intermatic Smart Guard IG2240-IMSK Whole Home Surge Protector comes with an extended warranty for connected equipment. It includes a $50,000 connected equipment warranty for 10 years, providing significant coverage for your appliances and electronics in the event of a surge-related failure while properly protected by this device.
For full details regarding the warranty terms, conditions, and claims process, please refer to the official documentation provided with your product or visit the manufacturer's website. The warranty description states "See Manf Description" for comprehensive information.
For technical support or further assistance, please contact Intermatic customer service through their official website or the contact information provided in the product packaging.
