Introduction
The Peach Document Shredder Oil PS100 is designed to maintain the optimal performance and extend the lifespan of your document shredder. Regular lubrication is crucial for both strip-cut and particle-cut shredders to ensure smooth operation and consistent cutting performance.
Image: Front view of the Peach Document Shredder Oil PS100 bottle, showing the label and product details.
Safety Information
- CAUTION: This product may irritate eyes. In case of contact, rinse thoroughly with water.
- Keep out of reach of children and pets.
- Store in a cool, dry place away from direct sunlight.
- Do not ingest. If swallowed, seek medical attention immediately.
Operating Instructions
Follow these steps to properly lubricate your document shredder:
- Step 1: Turn off the shredder. Ensure the shredder is powered off and unplugged for safety.
- Step 2: Prepare a sheet of paper. Take a single sheet of paper (A4 or Letter size).
- Step 3: Apply oil in a zig-zag pattern. Apply a zig-zag pattern of the Peach Shredder Oil across the entire width of the paper.
- Step 4: Shred the oiled paper. Feed the oiled paper into the shredder's paper entry slot.
- Step 5: Run in reverse (optional but recommended). For optimal distribution of the oil, after shredding the paper, switch the shredder to the "reverse" function and let it run for approximately 20 seconds. This helps to spread the oil evenly across the cutting blades.
Image: A hand holding the Peach Shredder Oil bottle, applying the oil in a zig-zag pattern onto a sheet of paper, positioned above a document shredder's feed slot.
Maintenance
Regular oiling is essential for the longevity and efficiency of your document shredder. It helps to:
- Prolong the life of the shredder's cutting mechanism.
- Ensure high and consistent cutting performance.
- Reduce wear and tear on the blades.
- Minimize paper jams and operational noise.
It is recommended to oil your shredder after every 30 minutes of continuous shredding or at least once a month, depending on usage frequency.
Specifications
| Feature | Detail |
|---|---|
| Brand | Peach |
| Model Number | 7640164824925 |
| Capacity | 355 ml |
| Item Weight | 350 Grams |
| Suitable for Cut Types | Strip Cut and Particle Cut |
| Manufacturer | 3T Supplies AG |
Image: Back view of the Peach Document Shredder Oil PS100 bottle, showing multilingual instructions and product identification details.
Troubleshooting
If your shredder is still experiencing issues after oiling, consider the following:
- Excessive Noise: Ensure the shredder bin is not overfilled. If noise persists, repeat the oiling process.
- Paper Jams: If jams occur frequently, ensure you are not exceeding the shredder's sheet capacity. Regular oiling helps prevent jams caused by dull blades.
- Reduced Performance: If the shredder's performance has significantly degraded, it might require professional servicing or blade sharpening beyond what oiling can address.
Warranty and Support
For specific warranty information or technical support regarding your Peach Document Shredder Oil PS100, please refer to the contact information provided by the manufacturer, 3T Supplies AG, or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.
For general inquiries, you may visit the Peach website or contact their customer service department.
