1. Introduction
The Geemarc EASY TV 10 is a universal remote control designed for simplicity and ease of use. It features 20 large, programmable buttons, making it suitable for individuals who prefer a straightforward interface for their television. This remote control is ideal for users who find standard remote controls with numerous buttons confusing or difficult to operate due to visual or tactile impairments.
This manual provides comprehensive instructions on how to set up, program, and operate your Geemarc EASY TV 10 remote control.
2. Safety Information
- Keep the remote control away from water and moisture.
- Do not expose the remote control to extreme temperatures or direct sunlight.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.
- Dispose of batteries responsibly according to local regulations.
3. Package Contents
- 1 x Geemarc EASY TV 10 Universal Remote Control
- 1 x User Manual (this document)
Note: AAA batteries are required and are not included in the package.
4. Product Overview
The Geemarc EASY TV 10 remote control features a simplified layout with large, clearly labeled buttons for essential TV functions.
Image 1: Front view of the Geemarc EASY TV 10 Universal Remote Control, showcasing its simplified layout with large, clearly labeled buttons for power, AV input, A/B modes, volume control, channel navigation, and number keys 0-9, along with a dash button and a recall button.
Image 2: Angled perspective of the Geemarc EASY TV 10 Universal Remote Control, illustrating its ergonomic shape and the prominent, easy-to-read nature of its buttons.
Image 3: Side profile view of the Geemarc EASY TV 10 Universal Remote Control, providing a clearer understanding of its thickness and overall physical design.
Button Functions:
- Power Button (Red): Turns the TV on or off.
- AV Button: Switches between video input sources (e.g., TV, HDMI, AV).
- A / B Buttons: Mode selection buttons for programming different devices or sets of functions.
- Volume +/-: Adjusts the sound volume.
- Channel Up/Down: Changes TV channels.
- Number Keys (0-9): Direct channel selection.
- -/-- Button: Used for two-digit channel numbers or other programmable functions.
- Loop/Recall Button: Typically used for recalling the previous channel or other programmable functions.
5. Setup
5.1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert 2 x AAA (LR03, 1.5V) batteries, ensuring correct polarity (+ and -).
- Close the battery cover securely.
5.2. Programming the Remote Control (Learning Function)
The Geemarc EASY TV 10 is a "learning" remote control. This means it learns commands directly from your original TV remote control. You must have a functional original remote control to program the EASY TV 10.
Important: Ensure both remote controls have fresh batteries and are pointed directly at each other during the programming process, ideally within 1-3 cm distance.
- Enter Learning Mode: Press and hold the desired mode button (A or B) on the Geemarc remote simultaneously with the Channel Down (V) button for approximately 3 seconds. The red indicator light on the Geemarc remote will illuminate brightly and then start blinking slowly, indicating it is ready to learn.
- Select Button to Program: Press the button on the Geemarc remote that you wish to program (e.g., the Power button). The red indicator light will blink rapidly, waiting for a signal.
- Transmit Signal from Original Remote: Point your original TV remote control directly at the Geemarc remote's infrared sensor (usually at the top). Press and hold the corresponding button on your original remote (e.g., the Power button).
- Confirmation: The red indicator light on the Geemarc remote will blink quickly three times and then remain steadily lit if the learning was successful. This indicates the command has been learned.
- Program More Buttons: Repeat steps 2-4 for all other buttons you wish to program (Volume +/-, Channel Up/Down, Number keys, AV, etc.).
- Exit Learning Mode: Once all desired buttons are programmed, press the A or B button again on the Geemarc remote to exit learning mode. The red indicator light will turn off.
Tip: If a button does not program correctly, the indicator light may not blink three times. Repeat the process for that specific button. Some users find it helpful to program both the 'A' and 'B' modes with the same TV functions to avoid confusion if one mode is accidentally selected.
6. Operating the Remote Control
After successful programming, the Geemarc EASY TV 10 remote control is ready for use.
- Point the remote control directly at your television.
- Press the programmed buttons to control your TV functions (e.g., Power, Volume, Channel).
- If you programmed different devices or functions to modes A and B, select the appropriate mode before pressing the function buttons.
7. Maintenance
7.1. Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
7.2. Battery Replacement
Replace batteries when the remote control's performance diminishes or if the indicator light does not respond as expected. Follow the battery installation steps in Section 5.1.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not work after programming. | Incorrect programming; low batteries in either remote; original remote not transmitting properly. | Ensure fresh batteries are installed. Repeat the programming steps carefully, ensuring both remotes are aligned and signals are transmitted correctly. |
| Indicator light does not blink three times during programming. | Signal not received or weak signal. | Adjust the distance and angle between the two remotes. Ensure no obstructions. Try again. |
| Remote works for some functions but not others. | Specific buttons were not programmed or programmed incorrectly. | Re-enter learning mode and reprogram the non-functional buttons. |
| Remote suddenly stops working. | Low batteries; accidental mode change (A/B). | Replace batteries. Check if the correct mode (A or B) is selected. |
9. Specifications
- Brand: Geemarc
- Model: EASY TV 10 (EASY-TV-10_BLK)
- Number of Programmable Buttons: 20
- Compatible Devices: Television
- Connectivity Technology: Infrared (IR)
- Power Source: 2 x AAA batteries (not included)
- Dimensions: Approximately 28 x 8 x 2 cm
- Item Weight: Approximately 63.5 grams
- Maximum Range: 10 meters
- Special Feature: Universal, Learning Function
10. Warranty and Support
Geemarc products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Geemarc website.
For technical support, troubleshooting assistance, or inquiries regarding your Geemarc EASY TV 10 remote control, please contact Geemarc customer service through their official channels. Contact details can typically be found on the product packaging or the Geemarc website.
