Mount Factory PRO-X6

Download PDF
Contents

Heavy-Duty Full Motion TV Wall Mount Instruction Manual

Model: PRO-X6

Introduction

Thank you for choosing the Mount Factory Heavy-Duty Full Motion TV Wall Mount, Model PRO-X6. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for flat screen televisions ranging from 42 to 70 inches, this articulating swivel bracket offers robust support and flexible viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

Mount Factory Heavy-Duty Full Motion TV Wall Mount with HDMI cable

Image: The Mount Factory Heavy-Duty Full Motion TV Wall Mount, showcasing the main bracket assembly, articulating arms, and an included 10-foot braided HDMI cable.

Safety Information

Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:

  • Weight Capacity: Do not exceed the maximum weight capacity of 100 pounds (45.3 kg). This mount is designed for televisions between 42 and 70 inches. Ensure your TV's weight and size are within these limits.
  • Structural Integrity: The wall structure must be capable of supporting the combined weight of the mount and the television. If unsure, consult a qualified professional.
  • Mounting Surface: Only mount to solid wood studs, concrete, or brick walls. Do not install on drywall alone.
  • Tools: Use appropriate tools for installation. Ensure all screws and bolts are securely tightened, but do not overtighten.
  • Cable Management: Route all cables safely to prevent pinching or damage, and to avoid tripping hazards.
  • Children and Pets: Keep children and pets away during installation.
  • Regular Checks: Periodically check the mount and all connections for signs of wear or loosening.
Diagram showing strong and safe design features of the TV wall mount

Image: A visual representation highlighting the heavy-duty alloy steel construction, 100 lbs rated capacity, universal fit for 40-70 inch TVs, and articulating movement capabilities of the mount.

Package Contents

Please verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.

  • TV Wall Mount Assembly (Wall Plate, Articulating Arms, TV Brackets)
  • Mounting Hardware Kit (various screws, anchors, washers for TV and wall)
  • 10-foot Braided HDMI Cable
  • Magnetic Level (color may vary)
  • Instruction Manual (this document)

Setup and Installation

Installation requires basic tools and adherence to safety precautions. It is recommended that two people perform the installation.

Tools Required (Not Included):

  • Stud Finder (for wood stud installation)
  • Drill with appropriate drill bits
  • Socket Wrench or Adjustable Wrench
  • Phillips Head Screwdriver
  • Pencil
  • Measuring Tape

Installation Steps:

  1. Determine Mounting Location: Use a stud finder to locate the center of two adjacent wood studs. Mark the drilling points for the wall plate. For concrete or brick walls, mark the desired mounting height.
  2. Drill Pilot Holes: Drill pilot holes at the marked locations. Ensure the depth and diameter of the holes match the provided lag bolts and anchors (if applicable for concrete/brick).
  3. Attach Wall Plate: Secure the wall plate to the wall using the provided lag bolts and washers. Use the magnetic level to ensure the wall plate is perfectly horizontal before fully tightening.
  4. Attach TV Brackets: Carefully lay your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the VESA hole pattern (200x200mm to 400x600mm) is correctly aligned.
  5. Hang TV on Wall Plate: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the brackets are securely seated.
  6. Secure TV to Mount: Tighten the security screws or locking mechanisms on the TV brackets to prevent accidental dislodging.
  7. Connect Cables: Connect your HDMI cable and other necessary cables to the TV. Route them through the mount's cable management clips (if available) for a tidy appearance.

Operating the Mount

Your Mount Factory TV wall mount offers a range of adjustments for optimal viewing.

Articulating Movement:

The dual articulating arms allow you to extend your TV away from the wall and position it as needed. The mount can retract to a low profile of approximately 3 inches from the wall and extend out up to 20 inches.

Diagram showing TV wall mount retraction and extension

Image: A visual guide demonstrating the mount's ability to retract to 3 inches from the wall and extend out up to 20 inches, illustrating its space-saving and flexible positioning capabilities.

Swivel Adjustment:

The mount allows your TV to swivel up to 160 degrees (80 degrees left and 80 degrees right) for flexible viewing from various angles in your room.

Diagram showing TV swivel movement up to 160 degrees

Image: An illustration showing a TV mounted on the wall mount, demonstrating its ability to rotate up to 160 degrees horizontally, allowing for wide viewing angles.

Tilt Adjustment:

Adjust the vertical tilt of your TV to reduce glare and achieve the perfect viewing angle. The mount supports a tilt range of +3 degrees (upward) to -5 degrees (downward).

Diagram showing TV tilt adjustment for glare reduction

Image: A visual demonstrating the TV's tilt capability, showing how it can be angled up or down to eliminate screen glare and optimize viewing comfort.

Leveling Adjustment:

After installation, you can fine-tune the TV's horizontal level by adjusting the leveling screws on the TV brackets. This allows for a rotation of approximately +/- 4 degrees to ensure your TV is perfectly straight.

Diagram showing TV leveling adjustment up to +/- 4 degrees

Image: An illustration depicting the TV's ability to be leveled post-installation, showing a slight rotational adjustment of +/- 4 degrees to ensure perfect horizontal alignment.

Maintenance

To ensure the longevity and safe operation of your TV wall mount, follow these maintenance tips:

  • Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
  • Check Connections: Periodically (e.g., every 6-12 months) inspect all mounting bolts and screws to ensure they remain tight. Do not overtighten.
  • Movement Check: Gently move the articulating arms and swivel mechanism to ensure smooth operation. If movement becomes stiff, check for obstructions or consult support.

Troubleshooting

ProblemPossible CauseSolution
TV is not level after installation.Wall plate not perfectly level, or fine-tuning needed.Use the post-installation leveling adjustment feature (+/- 4 degrees) on the TV brackets to correct the tilt. If the wall plate is significantly off, re-install.
Mount feels loose or unstable.Mounting bolts not fully tightened, or improper wall type.Ensure all wall bolts and TV bracket screws are securely tightened. Verify the mount is installed into solid wood studs, concrete, or brick. Do not exceed weight capacity.
Difficulty moving the TV (swivel/tilt/extension).Friction screws too tight, or cables obstructing movement.Check for any friction adjustment screws on the articulating arms and loosen slightly if necessary. Ensure cables are not caught or impeding movement.
Missing parts from package.Packaging error.Contact Mount Factory customer support with your purchase details.

Specifications

  • Brand: Mount Factory
  • Model: PRO-X6
  • Material: Alloy Steel
  • Color: Black
  • Mounting Type: Wall Mount
  • Movement Type: Articulating, Swivel, Tilt, Leveling
  • Compatible TV Sizes: 42 to 70 inches
  • Weight Capacity: Up to 100 lbs (45.3 kg)
  • VESA Compatibility: 200x200mm to 400x600mm
  • Extension from Wall: 3 inches (retracted) to 20 inches (extended)
  • Swivel Range: Up to 160 degrees (80 degrees left/right)
  • Tilt Range: +3 degrees (up) to -5 degrees (down)
  • Leveling Adjustment: +/- 4 degrees
  • Product Dimensions: Approximately 2.75 x 2.75 x 17.5 inches (when retracted, main body)
  • Item Weight: Approximately 12.57 pounds (5.7 kg)
  • UPC: 702082700624

Warranty and Support

For specific warranty information regarding your Mount Factory PRO-X6 TV Wall Mount, please refer to the documentation included with your purchase or visit the official Mount Factory website. Protection plans may be available for purchase separately through retailers.

For technical support, missing parts, or any inquiries, please contact Mount Factory customer service. You can often find contact information on the product packaging or through the retailer where the product was purchased.

Visit the Mount Factory Store for more information on their products.

© 2023 Mount Factory. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.