1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the RYOBI Table Saw Switch Assembly, part number 089110109712. Please read these instructions carefully before proceeding with any installation or repair to ensure safe and correct usage.
2. Product Overview
The RYOBI Switch Assembly 089110109712 is a genuine replacement part designed for various RYOBI table and band saw models. This component serves as the primary on/off control for your power tool, featuring a robust design with four electrical prongs for secure connection.
Compatible Models:
- RYOBI BS1001SV 10" Band Saw
- RYOBI BS902 9" Band Saw
- RYOBI BS903 9" Band Saw
- RYOBI BTS15 10" Table Saw
- RYOBI BTS20 10" Portable Table Saw
- RYOBI BTS20R 10" Table Saw
- RYOBI BTS20R-1 10" Table Saw
- RYOBI BTS21 10" Table Saw
- RYOBI OSS500 Oscillating Spindle Sander
- RYOBI BTS16 10" Table Saw
- RYOBI RTS30 10" Portable Table Saw
- RYOBI RTS20 Portable Table Saw with Quick Stand
- RYOBI RTS10 10" Table Saw
- RYOBI BTS211 10" Table Saw
- RYOBI RTS21 10 in. Table Saw
Image 2.1: Front view of the RYOBI Table Saw Switch Assembly. This image displays the red and yellow push-button controls for the switch, housed within a black plastic casing. The yellow button typically serves as the 'ON' control, and the red button as the 'OFF' control.
Image 2.2: Rear view of the RYOBI Table Saw Switch Assembly. This image shows the back of the switch assembly, revealing the four electrical prongs where the power tool's wiring connects. The mounting holes are also visible, indicating how the switch is secured.
3. Safety Information
WARNING: Always disconnect the power tool from its power source before performing any assembly, adjustments, or repairs. Failure to do so can result in serious personal injury or electrical shock.
- Ensure the power tool is unplugged before beginning any work on the switch assembly.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- If you are unfamiliar with electrical wiring or power tool repair, seek assistance from a qualified technician.
- Verify all connections are secure and correctly wired before restoring power to the tool.
- Keep children and bystanders away from the work area.
4. Installation
This section outlines the general procedure for replacing the switch assembly. Specific steps may vary depending on your table saw model. Always refer to your power tool's original instruction manual for detailed disassembly and reassembly procedures.
- Disconnect Power: Unplug the table saw from the electrical outlet.
- Access the Switch: Locate and access the existing switch assembly on your table saw. This may involve removing covers or panels.
- Document Wiring: Before disconnecting any wires, carefully note or photograph the existing wiring configuration. The switch has four prongs; ensure you understand which wire connects to each prong.
- Remove Old Switch: Disconnect the wires from the old switch and unmount it from its housing.
- Install New Switch: Position the new RYOBI Switch Assembly (089110109712) into the housing.
- Connect Wiring: Connect the wires to the four prongs of the new switch, ensuring they match the documented configuration from step 3. Double-check all connections for security.
- Secure Switch: Mount the new switch assembly securely in place using the original fasteners.
- Reassemble: Reattach any covers or panels that were removed.
- Test Functionality: Plug the table saw back into the power outlet. Carefully test the ON and OFF functions of the new switch to ensure proper operation before using the tool for any work.
5. Operation
The switch assembly provides simple ON/OFF control for your power tool.
- To Turn ON: Press the yellow button.
- To Turn OFF: Press the red button.
Ensure the switch operates smoothly and consistently. If you experience any issues, refer to the Troubleshooting section.
6. Maintenance
The RYOBI Switch Assembly 089110109712 is designed for durability and typically requires minimal maintenance.
- Regular Inspection: Periodically inspect the switch for any signs of physical damage, loose connections, or excessive wear.
- Cleaning: Keep the switch area clean and free from sawdust, debris, or moisture, which can interfere with its operation. Use a dry cloth or compressed air for cleaning.
- Avoid Liquids: Do not use liquid cleaners directly on the switch or electrical components.
7. Troubleshooting
If your table saw is not functioning correctly after switch installation, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not turn ON. |
|
|
| Saw does not turn OFF. |
|
|
| Intermittent power. |
|
|
8. Specifications
- Part Number: 089110109712
- Manufacturer Model Number: TTI-089110109712-V2
- UPC: 687927072152
- Number of Prongs: 4
- Approximate Package Dimensions (L x W x H): 3.98 x 3.43 x 1.89 inches
- Item Weight: 2.08 ounces
- Material: Plastic
- Manufacturer: Ryobi
9. Warranty and Support
This RYOBI Switch Assembly is covered by a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your original RYOBI power tool or contact RYOBI customer support directly.
For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please visit the official RYOBI website or contact their customer service department.
