1. Introduction
Welcome to the Coaster Fine Furniture family. Your new Sandy Beach Queen Panel Bed is designed for comfort and durability, featuring a cream white finish, carved panels, and a tall headboard. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product.
2. Safety Information
To ensure safe use and prevent injury or damage, please observe the following safety guidelines:
- Always follow assembly instructions carefully.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight limit of 600 pounds.
- Keep small parts away from children during assembly.
- Use on a level surface to prevent tipping.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Included Components
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Headboard
- Footboard
- Side Rails (2)
- Slats (multiple)
- Support Legs (for slats)
- Hardware Pack (bolts, washers, nuts, Allen wrench)
Figure 1: Main components of the Coaster Fine Furniture Queen Panel Bed, laid out before assembly. This image provides a visual reference for identifying parts.
4. Assembly Instructions
Assembly is required for this product. It is recommended that two adults perform the assembly.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts, washers, and nuts. Do not fully tighten yet.
- Attach Side Rails to Footboard: Repeat the process for attaching the side rails to the footboard.
- Insert Slats: Place the wooden slats across the side rails. Ensure they are evenly spaced and secured to the side rails using screws or pre-drilled holes.
- Install Support Legs: Attach any central support legs to the slats or crossbeams as indicated in the specific hardware instructions.
- Final Tightening: Once all components are in place, carefully tighten all bolts and screws. Do not overtighten.
Note: Specific hardware and attachment methods may vary. Refer to the detailed diagram for your model.
Figure 2: Rear view of the headboard and slat support system, illustrating attachment points for side rails and slat placement.
5. Usage
Your Coaster Fine Furniture Queen Panel Bed is designed to accommodate a standard queen-size mattress and box spring (if desired). Ensure the mattress is properly seated on the slats for optimal support and comfort.
Figure 3: The fully assembled Coaster Fine Furniture Queen Panel Bed in a bedroom setting, complete with a mattress, pillows, and bedding, demonstrating its appearance in use.
6. Maintenance and Care
Proper care will help maintain the beauty and longevity of your bed:
- Cleaning: Clean using a damp cloth. Avoid using strong chemicals or abrasive cleaners, as these can damage the finish.
- Dusting: Regularly dust with a soft, dry cloth.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.
- Protect from Moisture: Wipe up spills immediately to prevent water damage.
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly | Loose hardware | Check and tighten all bolts and screws. |
| Squeaking noises | Loose connections or uneven slats | Ensure all hardware is tight. Check slat placement and add felt pads if needed. |
| Parts missing | Packaging error | Contact Coaster Fine Furniture customer support with your model number and purchase details. |
8. Product Specifications
Detailed specifications for the Coaster Fine Furniture Sandy Beach Queen Panel Bed:
| Feature | Detail |
|---|---|
| Size | Queen |
| Special Feature | Panel Bed |
| Color | Cream White |
| Product Dimensions | 87.25"L x 65.25"W x 63"H |
| Brand | Coaster Fine Furniture |
| Included Components | Footboard, Headboard, Side Rails, Slats |
| Finish Type | White |
| Weight Limit | 600 Pounds |
| Item Weight | 105.6 Pounds |
| Furniture Finish | Cream White |
| Assembly Required | Yes |
| Headboard Material | Wood |
| Item Model Number | 201301Q |
| UPC | 021032399801 |
Figure 4: A technical diagram illustrating the precise dimensions of the Coaster Fine Furniture Queen Panel Bed, including length, width, and height measurements for the headboard, footboard, and overall frame. Useful for planning space.
9. Warranty Information
This Coaster Fine Furniture product comes with a limited warranty. For specific details regarding coverage and duration, please refer to the warranty card included with your purchase or contact Coaster Fine Furniture customer service.
10. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Coaster Fine Furniture customer support.
For more information, visit the official Coaster Fine Furniture website or refer to your purchase documentation.
