1. Introduction
The Wet Sounds Stealth 6 Ultra is an all-in-one Bluetooth soundbar designed for high-performance audio in various mobile applications, including side-by-sides and golf carts. This unit features a full extruded aluminum housing, a full-range speaker array, titanium dome tweeters, and an RF wireless remote for comprehensive control. It is engineered with an IP67 rating, indicating its resistance to dust and water ingress.
2. Safety Information
- Read all instructions before operating the device.
- Ensure proper power connections are made to avoid electrical hazards. The unit operates on a corded electric power source.
- Do not attempt to disassemble or modify the unit. This may void the warranty and pose safety risks.
- While the unit is IP67 rated for dust and water resistance, avoid prolonged submersion or high-pressure water jets.
- Keep the unit away from extreme temperatures and direct sunlight for extended periods.
- Use only specified mounting hardware and methods to ensure secure installation.
3. Package Contents
Verify that all items are present in the package:
- Wet Sounds Stealth 6 Ultra Soundbar
- RF Wireless Remote
- Mounting hardware (may vary based on specific kit)
- Power cable
4. Product Overview
The Stealth 6 Ultra soundbar features a robust design with integrated speakers and controls. Familiarize yourself with the main components:
Figure 4.1: Front view of the Wet Sounds Stealth 6 Ultra Soundbar, showcasing its grille and central control panel.
Figure 4.2: Side view of the soundbar, illustrating the integrated mounting bracket for installation.
Figure 4.3: Close-up of the central control panel on the soundbar, showing power, Bluetooth, volume, and track control buttons.
5. Setup
5.1 Mounting
The Stealth 6 Ultra supports various mounting types including bar mount, plug mount, and wheel mount. Refer to the specific mounting kit instructions for detailed installation steps. Ensure the soundbar is securely fastened to prevent movement during operation.
Figure 5.1: Angled front view of the soundbar, showing the overall design and potential mounting points.
5.2 Power Connection
Connect the provided power cable to the soundbar and to a suitable 12V DC power source. Ensure the connection is secure and protected from environmental elements. The unit is designed for corded electric power.
Figure 5.2: Close-up of the power input connection point on the soundbar.
6. Operating Instructions
6.1 Power On/Off
Press and hold the power button on the soundbar's control panel or the RF wireless remote to turn the unit on or off. An indicator light will confirm the power status.
6.2 Bluetooth Pairing
- Ensure the soundbar is powered on.
- Press the Bluetooth button on the control panel or remote. The Bluetooth indicator light will flash, indicating pairing mode.
- On your compatible device (e.g., smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Wet Sounds Stealth 6 Ultra" from the list.
- Once paired, the Bluetooth indicator light will become solid. The effective Bluetooth range is approximately 10 meters.
6.3 Audio Playback and Control
After successful Bluetooth pairing, you can play audio from your device. Use the control panel buttons or the RF wireless remote to:
- Volume Up/Down: Press the '+' or '-' buttons.
- Play/Pause: Press the Play/Pause button.
- Next/Previous Track: Press the forward or backward arrow buttons.
Figure 6.1: Illuminated control panel for easy operation in various lighting conditions.
7. Maintenance
7.1 Cleaning
To clean the soundbar, use a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish and seals. While the unit is IP67 rated, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes, it is recommended to wipe it down rather than submerge it or use high-pressure washing.
7.2 Storage
When not in use for extended periods, store the soundbar in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect it from the power source.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; Blown fuse; Vehicle battery low | Check power connections; Inspect and replace fuse if necessary; Charge vehicle battery. |
| No sound | Volume too low; Device not paired; Audio source issue | Increase volume; Re-pair Bluetooth device; Check audio playback on source device. |
| Bluetooth not connecting | Soundbar not in pairing mode; Device too far; Interference | Ensure soundbar is in pairing mode (flashing light); Move device closer (within 10m); Turn off other Bluetooth devices. |
| Remote not working | Remote battery low; Obstruction | Replace remote battery; Ensure clear line of sight to soundbar. |
9. Specifications
- Model Name: 6 Ultra
- Item Model Number: STEALTH 6 ULTRA
- Speaker Type: Soundbar
- Special Feature: Waterproof (IP67 Rated)
- Connectivity Technology: Bluetooth
- Wireless Communication Technology: Bluetooth
- Bluetooth Range: 10 Meters
- Speaker Maximum Output Power: 400 Watts
- Audio Output Mode: Stereo
- Control Method: Remote
- Included Components: Remote
- Power Source: Corded Electric
- Product Dimensions: 20.8"D x 4.3"W x 3.8"H
- Item Weight: 13 Pounds
- Mounting Type: Bar Mount, Plug Mount, Wheel Mount
- Indoor/Outdoor Usage: Outdoor
- Color: BLACK
- UPC: 853414005174
10. Warranty Information
The Wet Sounds Stealth 6 Ultra comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the documentation provided with your purchase or visit the official Wet Sounds website. Keep your proof of purchase for warranty claims.
11. Customer Support
For further assistance, technical support, or service inquiries regarding your Wet Sounds Stealth 6 Ultra soundbar, please visit the official Wet Sounds website or contact their customer service department. Contact information can typically be found on the manufacturer's website or in your product packaging.
