ArmorAll 12V Car Wet/Dry Shop Vacuum - Instruction Manual

Product Overview

The Armor All 12V Car Wet/Dry Shop Vacuum (Model AA12V10901) is designed for convenient and effective cleaning of vehicle interiors. It features both wet and dry pickup capabilities, a long power cord for extended reach, and integrated tools for detailed cleaning.

Key Features

• 12V Auto AC Plug: Easily power this vac with your vehicle's 12V port.
• 15-Ft. Power Cord: Reach messes almost anywhere in your vehicle.
• Wet/Dry Pick Up: Use on seats, floor mats, and in cup holders.
• Built-in LED Light: Conveniently lights up while vacuuming, perfect for cleaning under seats or in crevices.
• Built-in Retractable Crevice Tool: Clean debris between seats, or attach the included detail brush or squeegee for various applications.

Components and Accessories

Your ArmorAll 12V Car Wet/Dry Shop Vacuum package includes the following items:

• ArmorAll 12V Car Wet/Dry Shop Vacuum Unit
• Storage Bag
• Detail Brush
• Squeegee
• Washable Filter (one pre-installed)
• 12V DC Power Cord (integrated)
• Built-in Retractable Crevice Tool

This image displays the main vacuum unit, its integrated 12V power cord, and the accompanying accessories including a storage bag, detail brush, and squeegee. A visual representation of the wet pickup capability is also shown.

A detailed diagram highlighting the key features of the vacuum: LED light, easy access power switch, ergonomic handle, built-in crevice tool, reusable filter, and 15-foot power cord.

This image shows the storage bag, squeegee, and detail brush, numbered for easy identification.

Initial Setup

1. Unpack: Carefully remove all components from the packaging.
2. Inspect: Check the vacuum and all accessories for any signs of damage. Do not use if damaged.
3. Filter Installation: Ensure the washable filter is properly seated inside the dust collection chamber.
4. Power Connection: The vacuum is powered by your vehicle's 12V DC outlet. Locate the 12V port in your car.

This image demonstrates how to connect the vacuum's 12V power plug into your car's automotive DC outlet for quick and convenient power.

Operation

1. Connect Power: Insert the 12V power plug firmly into your vehicle's 12V accessory outlet.
2. Power On/Off: Locate the power switch on the top of the vacuum. Slide the switch to the "ON" position to start the vacuum. Slide it to "OFF" to turn it off.
3. Using the LED Light: If cleaning in low-light areas, press the dedicated LED light button to illuminate the cleaning path.
4. Dry Pickup: For dry debris such as dirt, crumbs, or dust, use the standard suction head or extend the built-in retractable crevice tool for tight spaces.
5. Wet Pickup: For liquid spills, attach the squeegee accessory to the suction nozzle. Carefully vacuum the liquid, ensuring not to exceed the "MAX" fill line on the dust collection chamber.
6. Using Attachments:
   • Built-in Retractable Crevice Tool: Slide the crevice tool forward from its storage position for reaching narrow gaps and corners.
   • Detail Brush: Attach the detail brush to the nozzle for cleaning upholstery, carpets, and other surfaces that require agitation.
   • Squeegee: Attach the squeegee for wet pickup.

This image illustrates the vacuum's wet pickup capability, showing it effectively cleaning a liquid spill from a car's floor mat.

The image demonstrates the use of the built-in crevice tool, reaching into hard-to-access areas between car seats.

Cleaning and Maintenance

1. Emptying the Dust Collection Chamber:
   • After each use, or when the "MAX" line is reached, disconnect the vacuum from the 12V power source.
   • Press the release button to detach the dust collection chamber from the motor unit.
   • Carefully empty the contents into a trash receptacle.
2. Cleaning the Filter:
   • Remove the filter from the dust collection chamber.
   • For dry debris, tap the filter gently to dislodge dust.
   • For wet debris or heavily soiled filters, rinse the filter under running water.
   • Allow the filter to air dry completely before reinserting it into the vacuum. Do not use the vacuum with a wet filter.
3. Cleaning Accessories: Wash the detail brush and squeegee with mild soap and water as needed. Allow them to air dry.
4. Storage: Store the vacuum and its accessories in the provided storage bag in a cool, dry place.

Troubleshooting Guide

If you experience issues with your ArmorAll 12V Car Wet/Dry Shop Vacuum, please refer to the following common solutions:

• No Power:
  • Ensure the 12V power plug is fully inserted into the vehicle's accessory outlet.
  • Check your vehicle's fuse box for a blown fuse related to the 12V outlet.
  • Verify the power switch on the vacuum is in the "ON" position.
• Low Suction:
  • Check if the dust collection chamber is full and needs emptying.
  • Ensure the filter is clean and properly installed. A clogged filter can significantly reduce suction.
  • Verify that the nozzle or hose is not blocked by large debris.
  • Ensure all attachments are securely connected.
• Wet Pickup Issues:
  • Ensure the squeegee attachment is correctly installed for wet use.
  • Do not exceed the "MAX" fill line for liquids.
  • The vacuum is designed for small liquid spills, not large volumes.

Product Specifications

Warranty and Support

Warranty Information

This ArmorAll 12V Car Wet/Dry Shop Vacuum comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product packaging or visit the official Armor All website.