Zojirushi Hybrid Water Boiler & Warmer

Introduction

Thank you for purchasing the Zojirushi Hybrid Water Boiler & Warmer. This appliance is designed to provide hot water at your desired temperature with convenience and energy efficiency. Please read this manual thoroughly before use to ensure safe and optimal operation.

Safety Information

• Always use the appliance on a stable, flat surface.
• Do not immerse the unit in water or other liquids.
• Keep out of reach of children.
• Do not operate if the power cord or plug is damaged.
• Ensure the lid is securely closed during operation to prevent hot water spills.
• Use caution when dispensing hot water to avoid burns.
• Only use the provided magnetic power cord.

Parts and Features

• Control Panel: Features buttons for Temperature Set, Reboil/Quick Temp, Dispense, Unlock, and Timer. Includes a digital display for current temperature.
• Water Level Gauge (Panorama Window): Easy-to-read wraparound gauge to monitor water level.
• Dispensing Spout: For controlled hot water dispensing.
• Detachable Lid: For easy filling and cleaning.
• Magnetic Power Cord: For safety and easy detachment.
• Swivel Base: Allows for easy rotation of the unit.

Image: Close-up view of the control panel, showing temperature settings, dispense, and unlock buttons.

Image: The Zojirushi Hybrid Water Boiler & Warmer with its dimensions clearly labeled, highlighting its compact design.

Setup

1. Unpack: Remove all packaging materials and inspect the unit for any damage.
2. Clean: Wash the interior pot and lid with warm, soapy water. Rinse thoroughly and dry.
3. Placement: Place the unit on a stable, heat-resistant surface away from walls and other appliances to ensure proper ventilation.
4. Fill: Open the lid and fill the interior pot with water up to the 'MAX' line indicated on the water level gauge. Do not overfill.
5. Connect Power: Attach the magnetic power cord to the unit and plug it into a standard electrical outlet.

Operating Instructions

Initial Boil and Keep Warm

1. After filling with water and connecting power, the unit will automatically begin heating the water to a boil (212°F/100°C).
2. Once boiled, the unit will switch to the last selected keep warm temperature setting.

Setting Temperature

• Press the TEMP SET button to cycle through the available keep warm temperatures: 160°F (71°C), 175°F (79°C), 195°F (90°C), and 208°F (98°C).
• The selected temperature will be displayed on the digital screen.

Quick Temp Mode

• Press the REBOIL/QUICK TEMP button to activate Quick Temp mode.
• In this mode, the water heats directly to the selected keep warm temperature without reaching a boil, reducing steam and energy consumption. This is ideal for purified or bottled water where de-chlorination is not necessary.

Dispensing Water

1. Place a cup or container under the dispensing spout.
2. Press the UNLOCK button. The unlock indicator light will illuminate.
3. Press and hold the DISPENSE button to release hot water. Release the button to stop dispensing.
4. For slow dispensing (e.g., for drip coffee), press the SLOW button after unlocking, then press DISPENSE.

Image: A hand pressing the 'DISPENSE' button, showing hot water flowing from the spout into a cup.

Timer Function

• Press the TIMER button to activate the energy-saving timer.
• Cycle through timer settings (6-10 hours) to delay the boiling process, saving energy during periods of non-use. The unit will automatically start heating at the end of the set timer.

Maintenance and Cleaning

Daily Cleaning

• Unplug the unit and allow it to cool completely.
• Remove the detachable lid and wash it with warm, soapy water.
• Wipe the exterior of the unit with a damp cloth. Do not use abrasive cleaners.
• The interior of the pot has a nonstick coating and can be cleaned with a soft sponge and mild detergent. Rinse thoroughly.

Descaling (Monthly or as needed)

• Mineral deposits (scale) can build up over time, affecting performance.
• Use citric acid cleaner (available from Zojirushi or general household stores) to descale the interior.
• Follow the instructions on the citric acid cleaner packaging. Typically, you fill the pot with water, add the cleaner, and run a cleaning cycle (refer to your unit's specific cleaning mode if available, or boil and let it soak).
• Rinse the interior thoroughly several times after descaling.

Image: An exploded view illustrating the internal structure and vacuum insulation layers of the water boiler, contributing to its energy efficiency.

Troubleshooting

Specifications

• Model Name: Hybrid Water Boiler And Warmer
• Model Number: CV-DCC40XT
• Capacity: 4.2 Quarts (4 Liters)
• Color: Stainless Dark Brown
• Material: Stainless Steel
• Keep Warm Settings: 160°F, 175°F, 195°F, 208°F, and Vacuum
• Special Features: Easy-to-Clean, Energy-Saving Timer (6-10 hours), Interchangeable melody or beep signal, Quick Temp Mode, Magnetic Power Cord
• Product Dimensions: 11.13"L x 8.75"W x 13.88"H
• Item Weight: 7 Pounds

Product Overview Video

Warranty and Support

Zojirushi products are known for their quality and durability. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Zojirushi website. You can also find additional support and product information at the Zojirushi Store on Amazon.