1. Introduction
Thank you for choosing the Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame, Model 204691F. This traditional wood bed frame features a 47-inch headboard and a matching footboard, both with elegant sleigh curves and a crisp white finish. This manual provides detailed instructions for safe assembly, proper care, and maintenance to ensure the longevity and enjoyment of your new bed frame.
Image 1.1: The assembled Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame in a white finish.
2. Safety Information
Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product.
- Keep all hardware and packaging materials out of reach of children.
- Assemble the product on a soft, non-abrasive surface (e.g., carpet or cardboard) to prevent scratches.
- Ensure all connections are securely tightened before use. Periodically check and re-tighten hardware as needed.
- Do not use power tools for assembly unless specifically instructed, as this may overtighten or damage components.
- This product is designed for use with a full-size mattress. Ensure your mattress fits properly within the frame.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Headboard (1)
- Footboard (1)
- Side Rails (2)
- Slats (Set of multiple wooden slats)
- Support Legs for Slats (Multiple)
- Hardware Pack (Bolts, washers, nuts, Allen wrench)
Image 3.1: Overview of the bed frame components, including the headboard, footboard, and side rails.
4. Assembly Instructions
Assembly typically requires two adults. Please follow these steps carefully.
Step 1: Attach Side Rails to Headboard
- Position the headboard upright.
- Align one side rail with the pre-drilled holes on the headboard's side.
- Insert bolts through the holes and secure with washers and nuts. Do not fully tighten yet.
- Repeat for the other side rail on the opposite side of the headboard.
Image 4.1: Detail of the headboard and side rail connection, showing the attachment mechanism.
Step 2: Attach Side Rails to Footboard
- Position the footboard upright.
- Connect the free ends of the side rails to the footboard, aligning holes.
- Insert bolts and secure with washers and nuts.
- Once all four connections are made, fully tighten all bolts using the provided Allen wrench.
Image 4.2: The bed frame structure after connecting the headboard, footboard, and side rails.
Step 3: Install Slats and Support Legs
- Place the wooden slats across the side rails, ensuring they are evenly spaced.
- Attach the support legs to the center of the slats, if applicable, and ensure they are firmly on the ground.
- Secure the slats to the side rails using screws, if provided, to prevent shifting.
Image 4.3: A diagram illustrating the bed frame's dimensions and the placement of slats and central support legs.
Your Coaster Home Furnishings Louis Philippe Full Size Sleigh Bed Frame is now assembled. Place your full-size mattress directly on the slats. A box spring is not typically required with this slat system, but can be used for additional height or support if desired.
5. Care and Maintenance
Proper care will help maintain the appearance and extend the life of your bed frame.
- Cleaning: Clean using a damp cloth. Avoid using strong chemicals, abrasive cleaners, or polishes that may damage the finish.
- Dusting: Regularly dust with a soft, dry cloth.
- Spills: Wipe spills immediately with a clean, damp cloth.
- Hardware: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Heat and Moisture: Keep the bed frame away from direct heat sources and areas of high humidity.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose hardware connections. | Ensure all bolts and screws are fully tightened. Check periodically and re-tighten as needed. |
| Squeaking noises. | Loose connections or friction between components. | Tighten all hardware. Apply a small amount of paraffin wax or silicone spray to contact points between wood components if squeaking persists. |
| Mattress sags or falls through slats. | Slats are not properly secured or are damaged. Insufficient support for mattress type. | Ensure all slats are correctly positioned and secured. Verify that central support legs are installed and making firm contact with the floor. Consider adding a plywood sheet over the slats for additional support if not using a box spring. |
7. Specifications
- Model Number: 204691F
- Brand: Coaster Fine Furniture
- Size: Full
- Color: White
- Finish Type: White
- Product Dimensions (Overall): 87"L x 56.25"W x 47"H
- Headboard Height: 47"
- Footboard Height: 35" (approximate, based on visual)
- Item Weight: Approximately 93 pounds
- Assembly Required: Yes
- Compatible Mattress Size: Full
- Special Feature: Sleigh Bed design
8. Warranty and Support
Coaster Fine Furniture products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture website.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Coaster Fine Furniture customer support:
- Website: www.coasterfurniture.com (for general information and support)
- Customer Service: Refer to your purchase documentation for direct contact numbers or email.
9. Product Videos
The following videos provide additional information about the product.
Coaster Fine Furniture Brand Overview
Video 9.1: An overview of the Coaster Fine Furniture brand, showcasing their commitment to quality and design. This video provides context about the manufacturer.
Product Review: Coaster Louis Philippe Sleigh Bed
Video 9.2: A brief review of the Coaster Louis Philippe Sleigh Bed, highlighting its features and design. This video offers a visual perspective of the assembled product in a room setting.
