MOUNTO C22
MOUNTO 3-Speed Air Mover 1HP Floor Blower (Model C22) Instruction Manual
Brand: MOUNTO | Model: C22
1. Introduction
The MOUNTO 3-Speed Air Mover (Model C22) is a high-velocity floor blower designed for efficient drying of floors, carpets, and other surfaces. Featuring a 1HP motor and capable of generating over 4000 CFM airflow, this unit is suitable for various environments including commercial and industrial settings. Its robust roto-mold housing ensures durability and long-lasting performance.
Figure 1: MOUNTO 3-Speed Air Mover, Model C22.
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, please read and follow all instructions carefully before operating this appliance.
- WARNING: Do not expose to rain or use in damp locations. This appliance is for indoor use only.
- Always connect to a properly grounded outlet.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or damage the appliance.
- Keep children and pets away from the appliance during operation.
- Always unplug the appliance before cleaning or performing any maintenance.
3. Package Contents
Verify that all items are present upon unpacking:
- 1 x MOUNTO 3-Speed Air Mover Unit (Model C22)
- 1 x 15ft Power Cord (attached)
4. Setup
The MOUNTO Air Mover comes pre-assembled and ready for use. Ensure the unit is placed on a stable, level surface before operation.
4.1 Positioning
The unit can be positioned in multiple angles to direct airflow effectively:
- Horizontal (0°): For general floor drying.
- Angled (45°): For targeted drying of specific areas or carpets.
- Vertical (90°): For drying walls or ceilings.
Figure 2: Multi-positional use of the air mover.
4.2 Power Connection
Connect the attached 15ft power cord to a standard 115V/60Hz grounded electrical outlet. The unit features a circuit breaker for safety.
5. Operating Instructions
5.1 Powering On/Off and Speed Selection
The MOUNTO Air Mover features a 3-speed rotary switch for controlling airflow:
- Ensure the unit is plugged into a grounded outlet.
- Turn the rotary switch to position '1' for Low speed, '2' for Medium speed, or '3' for High speed.
- To turn off the unit, rotate the switch to the 'OFF' position.
Figure 3: Speed control switch and power cord detail.
5.2 Auxiliary Outlets
The unit is equipped with auxiliary 115 VAC outlets. These allow for daisy-chaining multiple units or powering other small appliances. Refer to the unit's label for maximum output amperage with the unit ON or OFF.
5.3 Noise Level
The air mover operates at approximately 79 Decibels, providing powerful airflow with minimal sound for its performance class.
Figure 4: The air mover is designed for minimal sound operation.
6. Maintenance
6.1 Cleaning
Regular cleaning helps maintain optimal performance. Disconnect the power cord before cleaning.
- Wipe the exterior of the unit with a damp cloth.
- Use a vacuum cleaner or compressed air to remove dust and debris from the air intake and exhaust grilles.
- Do not use abrasive cleaners or solvents.
6.2 Storage
The MOUNTO Air Mover is designed to be stackable for convenient storage. Wrap the power cord around the integrated cord wrap. Store in a dry, cool place away from direct sunlight.
Figure 5: The unit features a portable and stackable design for easy storage and transport.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power to the outlet; Circuit breaker tripped; Unit switch is off. | Check power outlet; Reset the circuit breaker; Turn the switch to desired speed setting. |
| Reduced airflow. | Air intake/exhaust blocked; Fan blades dirty. | Clear any obstructions; Clean fan blades and grilles. |
| Unusual noise during operation. | Foreign object in fan; Loose components. | Turn off and unplug the unit, inspect for foreign objects; Contact customer support if noise persists. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | MOUNTO |
| Model Name | C22 |
| Motor Horsepower | 1 HP |
| Airflow Capacity | 4000+ CFM |
| Number of Speeds | 3 |
| Amperage | 6.22 Amps |
| Noise Level | 79 Decibels |
| Product Dimensions | 19"L x 19"W x 19"H |
| Item Weight | 39.3 pounds |
| Cord Length | 15 ft (14 AWG) |
| Special Feature | Corded, Stackable, Multi-directional airflow |
| Housing Material | Roto-mold polyethylene |
| Indoor/Outdoor Usage | Indoor |
Figure 6: Detailed product specifications.
9. Warranty and Support
9.1 Warranty Information
The MOUNTO 3-Speed Air Mover features a 5-year warranty on its rotationally molded polyethylene housing.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact MOUNTO customer support through their official website or the retailer where the product was purchased.