Introduction
This manual provides instructions for the proper installation, operation, and maintenance of the DiversiTech VP6X6 MP-6C Vibro Pad. This product is designed to reduce vibration and noise from various equipment.
Image: DiversiTech VP6X6 MP-6C Vibro Pad. This image shows the multi-layered construction of the pad, featuring a dark, ribbed rubber exterior and a reddish-brown cork core, designed for vibration isolation.
Setup and Installation
The VP6X6 MP-6C Vibro Pad is designed for straightforward installation. Follow these steps to ensure effective vibration isolation:
- Identify Placement: Determine the specific points under the equipment where vibration isolation is required. These are typically the feet or support points of the machinery.
- Prepare Surface: Ensure the surface where the pad will be placed is clean, dry, and free from debris.
- Position Pads: Carefully place the Vibro Pads directly under the equipment's support points. Ensure the ribbed rubber surface makes direct contact with both the equipment and the floor/base.
- Leveling (if applicable): If the equipment requires precise leveling, use additional shims or adjust the number of pads as necessary, ensuring stability.
- Verify Stability: After placement, gently test the equipment for stability. The pads should provide a firm, non-slip base.
For optimal performance, distribute the weight of the equipment evenly across all installed pads.
Operation
Once installed, the DiversiTech VP6X6 MP-6C Vibro Pad operates passively by absorbing and dampening vibrations. No active user intervention is required during operation.
- The multi-layered construction, combining rubber and cork, effectively isolates mechanical vibrations and reduces noise transmission.
- The ribbed design of the rubber surfaces enhances grip and prevents slippage, ensuring the equipment remains securely in place.
Maintenance
The DiversiTech VP6X6 MP-6C Vibro Pad requires minimal maintenance to ensure continued effectiveness.
- Regular Inspection: Periodically inspect the pads for any signs of wear, cracking, or degradation, especially if the equipment is frequently moved or subjected to heavy loads.
- Cleaning: If necessary, clean the pads with a damp cloth and mild detergent. Avoid harsh chemicals that could degrade the rubber or cork materials.
- Replacement: If a pad shows significant signs of damage or reduced effectiveness, replace it promptly to maintain optimal vibration isolation.
Troubleshooting
If you experience issues with vibration or noise after installing the Vibro Pads, consider the following:
- Excessive Vibration/Noise:
- Ensure the correct number of pads are used for the equipment's weight and footprint.
- Verify that the pads are evenly distributed and supporting the equipment's weight uniformly.
- Check for any direct contact between the equipment and the floor/base that bypasses the pads.
- Inspect pads for damage or compression that might reduce their effectiveness.
- Slippage:
- Ensure both the floor surface and the equipment's feet are clean and dry before placing the pads.
- Confirm the ribbed side of the pad is making proper contact with both surfaces.
If problems persist, consult a professional or contact DiversiTech customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | VP6X6 MP-6C |
| Dimensions | 6" x 6" x 7/8" (approximate) |
| Material | Rubber and Cork Composite |
| Item Weight | 4 Pounds (per pad) |
| Manufacturer | DiversiTech Corporation |
| ASIN | B00QW2AHCQ |
Warranty Information
DiversiTech Corporation products are manufactured to high standards. For specific warranty details regarding the VP6X6 MP-6C Vibro Pad, please refer to the official DiversiTech website or contact their customer support directly. Keep your purchase receipt as proof of purchase.
Support and Contact Information
For further assistance, technical support, or inquiries regarding the DiversiTech VP6X6 MP-6C Vibro Pad, please contact DiversiTech Corporation:
- Website: Visit the official DiversiTech Corporation website for product information and support resources.
- Customer Service: Refer to the website for current contact numbers or email addresses.
When contacting support, please have your product model number (VP6X6 MP-6C) and purchase details available.