Lemax Village Collection Street Lamp Set Of 4

Introduction

This instruction manual provides essential information for the safe and proper setup, operation, and maintenance of your Lemax Village Collection Street Lamp Set of 4. Please read this manual thoroughly before use and retain it for future reference.

The Lemax Village Collection Street Lamp Set features four miniature street lamps designed to enhance your village display. These lamps can be powered by batteries or an optional adapter (sold separately), offering flexible placement options.

Package Contents

• 4 x Lemax Village Street Lamps
• 1 x Battery Box (for 2 x "AA" batteries, not included)
• Instruction Manual (this document)

Figure 1: Product packaging showing the four street lamps. The packaging displays the Lemax Village Collection branding and indicates battery or adapter power options.

Setup

1. Battery Installation

1. Locate the battery box connected to the lamp set.
2. Open the battery compartment cover.
3. Insert two (2) "AA" size batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

2. Adapter Connection (Optional)

If using an optional Lemax power adapter (sold separately), connect the adapter plug into the designated port on the battery box. This will bypass battery power when connected.

3. Placement

Carefully position the four street lamps within your village display. The lamps are designed for pole mounting, allowing them to stand upright. Arrange the wiring neatly to avoid tangles and ensure stability.

Figure 2: The four street lamps removed from packaging, showing the connected battery box and wiring. Each lamp features a small wreath decoration.

Operating Instructions

The street lamp set can be operated using the push button switch located on the battery box or via a compatible remote control (if applicable and sold separately).

Power On/Off

• Push Button: Press the button on the battery box once to turn the lights on. Press it again to turn them off.
• Remote Control: If using a compatible Lemax remote control, follow its specific instructions to power the lamps on or off.

Ensure the power source (batteries or adapter) is properly connected for the lamps to function.

Maintenance

Cleaning

To clean the lamps, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or components.

Battery Replacement

When the lights become dim or stop working, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section to replace the "AA" batteries. Always replace all batteries at the same time with new ones.

Storage

When not in use, store the street lamp set in its original packaging or a protective container in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and corrosion.

Troubleshooting

Specifications

• Brand: Lemax
• Model: #14012A
• Lamp Type: Street Lamp
• Number of Lamps: 4
• Light Source: LED
• Power Source: Battery Powered (2 x "AA" batteries, not included) or Adapter Powered (adapter sold separately)
• Voltage: 1.5 Volts (per battery)
• Switch Type: Push Button, Remote (optional)
• Material: Plastic
• Color: Black
• Shade Material: Glass
• Shade Color: Black
• Product Dimensions (each lamp): Approximately 3.75 x 1 x 1 inches (H x W x D)
• Item Weight (total): Approximately 0.353 ounces
• Recommended Use: Decoration
• Indoor/Outdoor Usage: Outdoor (as per specifications, though typically used indoors for village displays)
• UPC: 728162140128

Note: Specifications are subject to change without notice.

Warranty and Support

For information regarding warranty coverage, product support, or replacement parts, please refer to the official Lemax website or contact Lemax customer service directly. Contact details can typically be found on the product packaging or the manufacturer's official website.

Lemax Official Website: www.lemaxcollection.com