1. Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your Armitron 20/4962BKTI Men's Watch. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.
2. Product Overview
The Armitron 20/4962BKTI is a men's analog watch featuring a durable stainless steel case and bracelet, Japanese quartz movement, and water resistance up to 165 feet. Its design includes a round dial with luminous stick markers and a stepped dial for enhanced readability.
2.1 Key Features:
- Round dial with luminous stick markers and stepped dial.
- 42 mm case with mineral crystal window.
- Japanese quartz movement with analog display.
- Deployant clasp with double push-button safety.
- Water resistant to 165 feet (50 meters).
2.2 Watch Components:
Refer to the image below for a visual representation of the watch components.

Figure 1: Front view of the Armitron 20/4962BKTI watch. Shows the dial, hands, markers, and crown on the side.
- Crown: Used for setting the time.
- Dial: Displays the time with hour, minute, and second hands.
- Case: The main body of the watch, housing the movement.
- Bracelet: Stainless steel band for wearing the watch.
- Clasp: Secures the watch on the wrist.
3. Setup
3.1 Setting the Time:
- Pull the crown out to the first position.
- Rotate the crown clockwise or counter-clockwise to move the hands and set the desired time.
- Once the time is set, push the crown back into its normal operating position.
3.2 Bracelet Adjustment:
The stainless steel bracelet may require adjustment to fit your wrist comfortably. It is recommended to have this adjustment performed by a professional jeweler to avoid damage to the bracelet or clasp. The watch features a deployant clasp with a double push-button safety mechanism for secure wearing.

Figure 2: The Armitron 20/4962BKTI watch worn on a wrist, illustrating typical fit.
4. Operating the Watch
Your Armitron 20/4962BKTI watch is designed for simple operation. Once the time is set, the Japanese quartz movement will accurately keep time. No further adjustments are typically needed unless the time needs to be reset due to battery replacement or travel across time zones.
5. Maintenance
5.1 Cleaning:
To maintain the appearance of your watch, wipe the case and bracelet with a soft, dry cloth. For more thorough cleaning of the stainless steel, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
5.2 Water Resistance:
This watch is water resistant to 165 feet (50 meters). This rating means the watch is suitable for short periods of recreational swimming, but not for diving or snorkeling. Avoid operating the crown while the watch is wet or submerged, as this can compromise the water resistance seal.
- Do not press buttons or pull the crown when the watch is wet.
- Avoid exposure to hot water, such as in showers or saunas, as this can damage seals.
- If the watch is exposed to saltwater, rinse it with fresh water and dry thoroughly.
5.3 Battery Replacement:
The watch is powered by one product-specific battery. When the watch stops running, the battery will need to be replaced. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
6. Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Time is inaccurate: This could indicate a low battery or a need for servicing. Ensure the crown is fully pushed in after setting the time.
- Condensation inside the crystal: This indicates a breach in the water resistance. Seek professional servicing immediately to prevent internal damage.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 20/4962BKTI |
| Brand | Armitron |
| Movement | Japanese Quartz |
| Display Type | Analog |
| Case Diameter | 42 mm |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Crystal Material | Mineral |
| Water Resistance | 165 feet (50 meters) |
| Battery | 1 Product-Specific (Included) |
| Item Weight | 294.84 grams |
| Country of Origin | China |

Figure 3: General watch size guide for reference. The Armitron 20/4962BKTI has a 42mm case diameter.
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Armitron website. Keep your proof of purchase for any warranty claims.
For service or repairs, it is recommended to contact Armitron customer service or an authorized service center.



