Beurer EM38

Download PDF
Contents

Beurer EM38 TENS Lower Back Pain Relief Belt Instruction Manual

Comprehensive instructions for the safe and effective use of the Beurer EM38 TENS Lower Back Pain Relief Belt, a muscle stimulator designed for targeted lower back pain relief.

1. Introduction

The Beurer EM38 TENS Lower Back Pain Relief Belt is an electrostimulation device designed to provide targeted relief for lower back discomfort. Transcutaneous Electrical Nerve Stimulation (TENS) works by delivering low-voltage electrical currents through electrodes to stimulate specific nerve pathways, which can help alleviate both acute and chronic pain.

This belt features an ergonomic design, integrated water contact electrodes, and a removable control unit for ease of use. Please read this manual thoroughly before first use to ensure proper operation and safety.

2. Product Overview

Beurer EM38 TENS Lower Back Pain Relief Belt

Figure 2.1: The Beurer EM38 TENS Lower Back Pain Relief Belt, showcasing its ergonomic design.

Beurer EM38 TENS Belt positioned on the lower back

Figure 2.2: The EM38 belt designed specifically for the lower back area.

2.1 Key Features

  • TENS Therapy: Provides targeted electrostimulation for lower back pain relief.
  • 4 Water Contact Electrodes: Integrated electrodes eliminate the need for replacement pads or contact gel.
  • 4 Programs & 20 Intensity Levels: Offers customizable treatment options for comfort and effectiveness.
  • Digital LCD Display: Clear display for intensity, timer, and program selection.
  • Timer Function: Pre-set 30-minute channels.
  • Safety Features: Auto-shutoff, pause function, safety switch-off, and key lock.
  • Adjustable Fit: Ergonomic belt fits waist circumferences of 30-55 inches (with included extension strap).
Close-up of the 4 water-contact electrodes on the Beurer EM38 belt

Figure 2.3: The four integrated water-contact electrodes, eliminating the need for gels or replacement pads.

Digital LCD display of the Beurer EM38 control unit

Figure 2.4: The digital LCD display showing intensity, timer, and program settings, with auto switch-off feature.

3. What's Included

Contents of the Beurer EM38 package: back belt, control unit, extension belt, AAA batteries, and instruction manual

Figure 3.1: All components included in the Beurer EM38 package.

  • Beurer EM38 Back Belt with Control Unit
  • Extension Belt (15 inches)
  • 3 x 1.5 V AAA Alkaline Batteries
  • Instruction Manual (this document)

4. Setup and Assembly

4.1 Battery Installation

  1. Locate the battery compartment on the control unit.
  2. Insert 3 x 1.5 V AAA alkaline batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment securely.

4.2 Attaching the Control Unit

Inserting the control unit into the belt holder until it clicks

Figure 4.1: Securely insert the control unit into its designated holder on the belt.

The control unit is designed to be easily inserted and removed from the belt. Align the control unit with the holder on the belt and push it in until it clicks securely into place.

4.3 Wearing the Belt

The 15-inch extension belt included with the Beurer EM38

Figure 4.2: The included 15-inch extension belt for larger waist sizes.

  1. Ensure the four water contact electrodes on the inside of the belt are slightly moistened with water. This is crucial for proper conductivity.
  2. Position the belt around your lower back, ensuring the electrodes are in direct contact with your skin.
  3. Fasten the belt securely using the hook-and-loop closures. The belt should be snug but comfortable.
  4. If your waist circumference exceeds the standard belt size, attach the included 15-inch extension belt. The belt is designed to fit waist sizes from approximately 30 to 55 inches with the extension.

5. Operating Instructions

5.1 Powering On/Off

  • To turn on the device, press and hold the power button (⑁) on the control unit. The LCD display will illuminate.
  • To turn off the device, press and hold the power button again.

5.2 Program Selection

Close-up of the Beurer EM38 control unit showing program selection buttons

Figure 5.1: The control unit with buttons for program selection and intensity adjustment.

  • The EM38 offers 4 pre-set programs (A, B, C, D).
  • Press the 'P' button to cycle through the available programs. The selected program will be displayed on the LCD screen.
  • Each program has a fixed duration of 30 minutes.

5.3 Intensity Adjustment

Beurer EM38 control unit displaying 20 intensity levels

Figure 5.2: The device offers 20 adjustable intensity levels for personalized comfort.

  • After selecting a program, use the up (▲) and down (▼) arrow buttons to adjust the intensity level.
  • There are 20 adjustable intensity levels. Start with a low intensity and gradually increase it until you feel a comfortable, yet effective, tingling or massaging sensation.
  • Avoid setting the intensity too high, which may cause discomfort.

5.4 Timer Function

Beurer EM38 control unit showing timer function

Figure 5.3: The timer function ensures sessions conclude automatically.

  • All programs are pre-set to a 30-minute duration. The remaining time will be displayed on the LCD screen.
  • The device will automatically switch off once the session is complete.

5.5 Safety Auto Switch-Off

Hand pressing the power button on the Beurer EM38 control unit, indicating safety auto switch-off

Figure 5.4: The safety auto switch-off feature enhances user safety.

  • The device features an automatic safety switch-off. If the electrodes lose sufficient contact with the skin, the intensity will automatically reset to 0.
  • The device will also automatically switch off after the programmed session duration.

6. Maintenance and Care

  • Always turn off the device and remove the control unit from the belt before cleaning.
  • Clean the belt and electrodes with a damp cloth. Do not use any chemical cleaners, abrasive agents, or immerse the belt in water.
  • Allow the belt to air dry completely before storing.
  • Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • If the device will not be used for an extended period, remove the batteries from the control unit.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Batteries are depleted or incorrectly inserted.Check battery polarity and replace with new AAA batteries if necessary.
No sensation or weak sensation during use.Electrodes are not sufficiently moistened or not in full contact with skin. Intensity level is too low.Ensure electrodes are moistened with water. Adjust belt for firm skin contact. Increase intensity gradually using the up arrow button.
Display shows "00" intensity automatically.Safety switch-off activated due to poor skin contact.Re-moisten electrodes and adjust belt for better skin contact. Increase intensity again.
Device turns off unexpectedly.Session completed, low battery, or safety switch-off.Check if session time has elapsed. Replace batteries if low. Ensure good skin contact.

If you experience persistent issues not covered here, please contact Beurer customer support.

8. Specifications

  • Model: EM38
  • Power Supply: 3 x 1.5 V AAA batteries (included)
  • Product Dimensions: 11.8 x 7.7 x 3.1 inches
  • Weight: 1.1 Pounds
  • Waist Circumference: Approx. 30-55 inches (with extension belt)
  • Electrodes: 4 water contact electrodes
  • Programs: 4 pre-set programs
  • Intensity Levels: 20 adjustable levels
  • Timer: 30-minute fixed duration per program
  • Manufacturer: Beurer North America LP

9. Important Safety Information

Please observe the following safety guidelines to prevent injury or damage to the device:

  • Do not use the device if you have a pacemaker, implanted defibrillator, or other implanted metallic or electronic devices.
  • Consult your physician before use if you have any medical conditions, including but not limited to heart disease, epilepsy, cancer, or if you are pregnant.
  • Do not use on open wounds, irritated skin, or areas with reduced sensation.
  • Keep out of reach of children.
  • Do not use while driving or operating machinery.
  • Only use the device for its intended purpose as described in this manual.
  • Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

10. Warranty and Support

Beurer products are designed for reliability and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Beurer website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Beurer North America customer service.

Manufacturer: Beurer North America LP

Contact Information: Refer to the contact details provided in your product packaging or on the official Beurer North America website.

11. Product Video

Watch the official product video for a visual guide on the Beurer EM38 TENS Belt features and usage.

Video 11.1: Official overview of the Beurer EM38 TENS Belt, demonstrating its features and application.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.